Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.

PHABRIX Rx 1000 (1RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer with One Analyzer and Generator Module

SKU: PHRX1000AG

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Protection
Q&A

Questions & Answers

FAQ

What is the purpose of the Analyzer and Generator Module in the Rx 1000?

The Analyzer and Generator Module in the Rx 1000 allows users to generate and analyze up to 32 test patterns. This feature is essential for testing and troubleshooting video and audio equipment, ensuring its optimal performance.

How does the Rx 1000 assist in fault diagnosis?

The Rx 1000 enables faster, intermittent fault finding using video and audio capture. This capture can be triggered automatically when faults are identified by the analyzer. Additionally, its remote access capability allows engineers to monitor and analyze video from any location, speeding up fault diagnosis.

What does the Rx 1000 offer in terms of audio monitoring?

The Rx 1000 supports multi-channel audio monitoring, with up to 4 channels of loudness metering and monitoring. It complies with ITU or EBU Recommendation 128, and loudness logs are stored automatically.

How does the Rx 1000 contribute to optimizing workflows?

The Rx 1000 features highly customizable layouts, allowing up to 16 instruments to be displayed simultaneously at sizes ranging from full screen down to 1/16 screen. With up to 99 presets available for rapid recall of layout pre-sets, it caters to individual operators and key applications, optimizing workflows.

What makes the Rx 1000 suitable for space-restricted environments?

The Rx 1000 has a compact 1RU design, weighing just 2.0kg. It also has low power consumption, making it an efficient operation solution for space-restricted environments such as OB trucks and small broadcast facilities.

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

PHABRIX Rx 1000 Specifications

Rx 1000 Analyzer

Rx 1000 Analyzer

Jump to...
  • Formats supported

    SD-SDI, HD-SDI, 3G-SDI, 2K-SDI (generation, analysis & monitoring)

  • Video inputs/outputs

    4 - 8 x SDI for 2K/3G/HD/SD, 75Ohms terminated BNC Inputs
    1 - 4 RTE Real-time Eye input (2K/3G/HD/SD-SDI)
    SFP+ MSA/NON-MSA 12 Gbps copper or fibre SDI, 10G Ethernet

  • Audio inputs/outputs

    8 channel 48kHz PCM audio on HDMI and SDI Instrument outputs
    AES input AES 3-ID, SMPTE 276M-1995, 75Ohms BNC
    Stereo analogue audio output, (via 26 pin high density 'D' Type socket)
    Calibrated stereo balanced analogue audio output (option module)
    LTC input (via 26 pin high density 'D' Type socket)

  • User interface

    HDMI instrument output, 1920 x 1080, 4:4:4 RGB, Type A
    SDI instrument output, 1920 x 1080, 4:2:2 YUV, BNC 75Ohms

  • Reference

    Reference/VITC input, passive loop through, BNC 75Ohms compensated

  • Networking & control

    Ethernet remote control via browser, RJ45 connector, 10/100Base-T
    IP sockets based remote control as standard
    8x GPI I/O (via 26 pin high density 'D' Type socket)
    Front panel USB 2.0 host port type A socket + 2 rear panel USB 2.0 ports
    FPGA firmware/software upgrade via Ethernet/USB

  • Monitoring

    Front panel headphone connector 6.3mm (1/4 inch) stereo jack
    Internal loudspeaker (beeper)
    Front panel volume/gain control

  • Electrical

    Power consumption: 24W typical 70W max (variable on modules inserted)
    4 Pin XLR power connector, 12V nominal (9V-18V)
    AC Power adaptor (included), 90-264VAC, 120W
    Whisper quiet temperature controlled fan (1 x 40mm external)

  • Rack mount

    1RU 19" (48.26cm)

Analyzer SDI Input

Jump to...
  • Label

    SDI ANA IN

  • Supported standards

    SD-SDI or HD-SDI

  • Connector

    BNC

  • Input Impedance

    75Ohms terminated

  • Input Return Loss

    Better than 15dB (5MHz-1485MHz) and 10dB (1485MHz-2970MHz)

  • Maximum Input Voltage

    +/- 2V

  • Purpose

    Analyzer Input

Analyzer SDI Output

Jump to...
  • Label

    SDI ANA OUT

  • Connector

    BNC

  • Output Impedance

    75Ohms terminated

  • Purpose

    Loop through of SDI ANA IN

Generator SDI Outputs

Jump to...
  • Label

    SDI GEN OUT

  • Supported standards

    SD-SDI or HD-SDI

  • Connector

    2x BNC

  • Output Impedance

    75Ohms terminated

  • Output Level

    +/- 400mV

  • Purpose

    Generator Output

Video Test Signals

Jump to...
  • Resolution

    10 bits

  • Static Test patterns

    32+ including full frame

  • User defined

    DPX, YUV, TGA, BMP

  • Zone plate

    Yes

Audio Test Signal

Jump to...
  • Fixed tones

    17

  • Variable tones

    1Hz-24Khz in 1Hz steps

  • Intermittent Tone

    Yes

  • White noise generation

    Yes

  • Audio levels variable

    0 to -100dB in 1dB steps

  • Audio phase invert

    Yes

General

Jump to...
  • Dimensions (WxHxD)

    440 x 44 x 170mm (17.32 x 1.73 x 6.69") excluding ears & projections

  • Weight

    2.0kg (4.41 lbs)

About PHABRIX Rx 1000

You can elevate your broadcast or video production quality with the sophisticated Rx 1000 (1RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer. This high-tech device is a compact, space-saving solution that offers advanced video and audio analysis and monitoring across four channels of 2K/3G/HD/SD-SDI signals.

Designed for professionals, the Rx 1000 is equipped with a unique Analyzer and Generator Module, enabling you to generate and analyze up to 32 test patterns, including Pathological and moving patterns. This innovative feature is essential for testing and troubleshooting your equipment, ensuring optimal performance.

The Rx 1000 stands out for its ability to display up to 16 instruments per channel for comprehensive video analysis and physical layer testing. This feature is particularly beneficial for space-restricted broadcast facilities, OB trucks, and broadcast technology manufacturers.

Enhance your workflow with the Rx 1000's highly customizable layouts. You can display up to 16 instruments simultaneously, with sizes ranging from full screen down to 1/16 screen. Channel identification is simplified with a dedicated window color per channel, and up to 99 presets are available for rapid recall of layout pre-sets, catering to even the largest facility.

The Rx 1000 is not just a monitoring solution; it's a powerful diagnostic tool. It enables faster, intermittent fault finding using video and audio capture, triggered automatically when faults are identified by the analyzer. This feature, coupled with remote access capability, allows engineers to monitor and analyze video from any location, speeding up fault diagnosis.

The Rx 1000 also supports multi-channel audio monitoring, with up to 4 channels of loudness metering and monitoring. It supports ITU or EBU Recommendation 128, and loudness logs are stored automatically.

The compact 1RU design of the Rx 1000, weighing just 2.0kg and with low power consumption, makes it an ideal choice for professionals seeking a cool, efficient operation. With the Rx 1000, you're not just getting a product; you're investing in a comprehensive toolset for broadcasters and video technology manufacturers.

PHABRIX Rx 1000 Features

  • Advanced 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer for professionals in the television and film industry
  • Equipped with a unique Analyzer and Generator Module for comprehensive video and audio analysis
  • Features customizable layouts with up to 16 instruments displayed simultaneously for optimized workflows
  • Enables faster, intermittent fault finding with automated video and audio capture
  • Supports multi-channel audio monitoring with up to 4 channels of loudness metering and monitoring
  • Compact 1RU design with low power consumption for efficient operation in space-restricted environments

Product Documents

User Manual

Key Features

  • Equipped with a unique Analyzer and Generator Module for comprehensive video and audio analysis
  • Enables faster, intermittent fault finding with automated video and audio capture
  • Supports multi-channel audio monitoring with up to 4 channels of loudness metering and monitoring

What's in the box:

  • PHABRIX Rx 1000 (1RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer with One Analyzer and
  • PHABRIX 1 Year Warranty