PHABRIX Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer Via Dual Built In Screens and Speakers with One Analyzer Module

SKU: PHRX2000A

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Protection
Q&A

Questions & Answers

FAQ

What are the main features of the Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer?

The Rx 2000 features dual built-in screens and speakers for real-time signal monitoring and testing, up to 16 instruments per channel for comprehensive video analysis, user-defined instrument display layouts for customized monitoring configurations, and advanced diagnostic tools for Real-time Eye, Jitter analysis, closed caption, loudness, and Dolby monitoring.

What is the intended use of the Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer?

The Rx 2000 is intended for use as a signal analyzer and test pattern generator in the television and video production industry. It is designed to monitor and analyze video and audio signals to ensure they meet industry standards.

What makes the Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer different from other similar products?

The Rx 2000 stands out for its advanced features such as dual built-in screens and speakers, the ability to display up to 16 instruments per channel, and its user-defined instrument display layouts. It also includes advanced diagnostic tools for comprehensive signal analysis.

Can the Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer be used remotely?

Yes, the Rx 2000 has remote access capabilities, allowing engineers to monitor and analyze video from any location.

Does the Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer support both video and audio analysis?

Yes, the Rx 2000 supports both video and audio analysis, making it a versatile tool for the television and video production industry.

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

PHABRIX Rx 2000 Specifications

Rx 2000 Analyzer

Rx 2000 Analyzer

Jump to...
  • Formats supported

    SD-SDI, HD-SDI, 3G-SDI, 2K-SDI (generation, analysis & monitoring)

  • Video inputs/outputs

    4 - 8 x SDI for 2K/3G/HD/SD, 75Ohms terminated BNC Inputs
    1 - 4 RTE Real-time Eye inputs (2K/3G/HD/SD-SDI)
    SFP+ MSA/NON-MSA 12 Gbps copper or fibre SDI, 10G Ethernet

  • Audio inputs/outputs

    8 channel 48kHz PCM audio on HDMI and SDI Instrument outputs
    AES input AES 3-ID, SMPTE 276M-1995, 75Ohms BNC
    Stereo analogue audio output, (via 26 pin high density 'D' Type socket)
    Calibrated stereo balanced analogue audio output (option module)
    LTC input (via 26 pin high density 'D' Type socket)

  • User interface

    HDMI instrument output, 1920 x 1080, 4:4:4 RGB, Type A
    SDI instrument output, 1920 x 1080, 4:2:2 YUV, BNC 75Ohms

  • Reference

    Reference/VITC input, passive loop through, BNC 75Ohms compensated

  • Networking & control

    Ethernet remote control via browser, RJ45 connector, 10/100Base-T
    IP sockets based remote control as standard
    8 x GPI I/O (via 26 pin high density 'D' Type socket)
    Front panel USB 2.0 host port type A socket + 2 rear panel USB 2.0 ports
    FPGA firmware/software upgrade via Ethernet/USB

  • Monitoring

    Dual 16:9, 24 bit, 4.3" TFT, 480 x 272 pixels OLED display
    Front panel headphone connector 6.3mm (1/4 inch) stereo jack
    Internal loudspeakers (2 x 7W wide range)
    Front panel volume/gain control

  • Electrical

    Power consumption 27W typical 70W max (variable on modules inserted)
    4 Pin XLR power connector, 12V nominal (9V-18V)
    AC Power adaptor (included), 90-264VAC, 120W
    Whisper quiet temperature controlled fan (1 x 60mm external)

  • Rack mount

    2RU 19" (48.26cm)

  • Tilt

    Viewing angle tilt mechanism

Analyzer SDI Input

Jump to...
  • Label

    IN1 and IN2

  • Supported standards

    SD-SDI or HD-SDI

  • Connector

    2x BNC

  • Input Impedance

    75Ohms terminated

  • Input Return Loss

    Better than 15dB (5MHz-1485MHz) and 10dB (1485MHz-2970MHz)

  • Maximum Input Voltage

    +/- 2V

  • Purpose

    Analyzer Input

Analyzer SDI Output

Jump to...
  • Label

    LP1 and LP2

  • Connector

    2x BNC

  • Output Impedance

    75Ohms terminated

  • Purpose

    Loop through of IN1 and IN2

Picture Monitor

Jump to...
  • Aspect ratio control

    4 : 3 or 16 : 9 (HDMI display only)

Waveform Monitor

Jump to...
  • Waveform types

    YCbCr, Y, Cb, Cr, GBR, R, G or B

  • Line selection

    Specific lines or all lines

Vectorscope

Jump to...
  • Graticule

    100% or 75%

  • Scaling

    x1, x2, x5 or x10

  • Line selection

    Specific lines or all lines

Audio Monitor

Jump to...
  • Displayed channels

    16 (4 groups of 4 channels)

  • Audio scale

    -18dB or -20db

General

Jump to...
  • Dimensions (WxHxD)

    440 x 88 x 150mm (17.32 x 3.46 x 5.91") excluding ears & projections

  • Weight

    2.3kg (5.07 lbs)

About PHABRIX Rx 2000

Enhance your broadcast quality control with the sophisticated Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer. This high-tech device offers advanced video and audio analysis, signal generation, and monitoring capabilities, making it an essential tool for professionals in the television and video production industry.

The Rx 2000 is equipped with dual built-in screens and speakers, allowing for real-time monitoring and analysis of HD and SD-SDI signals. With the ability to display up to 16 instruments per channel, this innovative analyzer provides comprehensive video analysis and physical layer testing.

Designed for optimal workflow, the Rx 2000 features ultra-flexible, user-defined instrument display layouts. You can customize your monitoring configurations to suit individual operators and key applications, with rapid recall of layout presets for fast turnarounds.

The Rx 2000 also excels in fault diagnosis, enabling faster, intermittent fault finding using video and audio capture. Its remote access capability allows engineers to monitor and analyze video from any location, making it a versatile solution for broadcast studios, post-production facilities, and live event venues.

This professional-grade analyzer also includes advanced diagnostic tools, such as Real-time Eye and Jitter physical layer analysis instruments, closed caption, loudness, and Dolby monitoring. It supports 2K/3G/HD/SD-SDI generation, analysis, and monitoring, and offers a signal generator option for video and audio.

The Rx 2000 is also designed for convenience and ease of use, with a compact 2RU design, viewing angle tilt mechanism, and low power consumption for cool operation. It also includes a single analyzer module with dual inputs, allowing two signals to be connected and monitored continuously.

Whether you're working in a broadcast studio, post-production facility, or live event venue, the Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer is a reliable, high-quality solution for all your signal monitoring and testing needs.

PHABRIX Rx 2000 Features

  • Advanced 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer for professional video and audio analysis
  • Features dual built-in screens and speakers for real-time signal monitoring and testing
  • Offers up to 16 instruments per channel for comprehensive video analysis & physical layer testing
  • Includes user-defined instrument display layouts for customized monitoring configurations
  • Equipped with advanced diagnostic tools for Real-time Eye, Jitter analysis, closed caption, loudness, and Dolby monitoring
  • Compact 2RU design with low power consumption for ease of use and cool operation

Product Documents

User Manual

Key Features

  • Features dual built-in screens and speakers for real-time signal monitoring and testing
  • Offers up to 16 instruments per channel for comprehensive video analysis & physical layer testing
  • Includes user-defined instrument display layouts for customized monitoring configurations
  • Compact 2RU design with low power consumption for ease of use and cool operation

What's in the box:

  • PHABRIX Rx 2000 (2RU) 4-Channel HD/SD-SDI Waveform Monitoring/Testing Analyzer Via Dual Built In Scr
  • PHABRIX 1 Year Warranty