PermaJetUSA Digital Negative Film 165 A4 Specialist Inkjet Photo Paper, 0.16mm Thickness, 10 Sheets

PermaJet Digital Transfer Film is coated with a transparent layer of ultra fine ceramic particles which form a vast number of regular shaped pores enabling the ink to be absorbed more evenly and faster to produce a negative or positive transparency with density and a good tonal range.

• Antic-static
• Excellent ink drying speed
• High level of ink coverage and resolution

Product Handling
Avoid touching the surface, hold by edges and keep away from moisture, high humidity and direct sunlight. While the material is fast drying, should you need to stack the film after printing allow sufficient time for the ink to dry before stacking. If you require to stack faster then make sure you put an interleaving sheet of ordinary copier paper between.

Printing Side
The printing side is facing you when you hold the film with the short edges top and bottom. Remember not to get finger marks on the film!

Printer Settings
It is always recommended to select Photo Glossy or Film paper setting when using this material. Please note that you may have to experiment when using 1440dpi. Dye based printer's 720/1440dpi / Pigment based printers 720dpi.

Applications of Use
Negative & positive reprographic masters for screen printing work using inkjet printers. Highly recommended for image creation/transfer by contact method onto traditional chemical darkroom photo-sensitive materials.

Printer & Ink Compatibility
PermaJet Digital Transfer Film has been designed for use with most Dye & Pigment inkjet systems. The media has been designed, manufactured and tested for use with Epson, HP, Canon and Lexmark printers. Not compatible with solvent or oil based inks.

Storage & Conditions of Use
The storage and use of the product should be in a climate and a temperature of 15 to 30 deg. C at a relative humidity of 30 to 60%. Always keep the product in its original packaging or in archival quality folders. Where possible, always handle the media or printed surface by its edges. All recommendations and product indications are for guidance and are subject to their test criteria, these remain subject to change without prior notice. There is no guarantee that the same results can be consistent.