Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.

ProMediaGear PMG-DUO 32" Video Slider with Carrying Case, 28" Travel

SKU: PMGVS32

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

2020-12-21T02:16:12

Rated 5 out of 5

Solid, Functional, Smooth as Glass

I have had this slider with the motor and controller for years now. I use it about 3 times a week and it continues to work extremely well. I did purchase extra supports so I can attach this slider to a single heavy-duty tripod. The braces attach to the slider ends and back to tripod legs which make for a very stable platform. The slider is extremely well made and I can't imagine ever wearing it out, smooth as glass when manual or motor sliding. The radius is particularly helpful when panning across a product to show many angles while fixed on that axis. The attached feet are easy to swing down into position for tabletop use. With the motor assist, the motor does make some noise, so your audio pickup shouldn't be on the camera and will need to be placed between the slider and subject to avoid picking up that motor noise. It's expensive and worth every single penny. I would recommend getting the largest one you can afford. I would buy it again.

FREDERICK D.

2016-10-12T11:02:12

Rated 5 out of 5

Simple Well Made A Tad Noisy

I have some old sliders and wanted to get something new, so this looked like a pretty good upgrade. I'm a professional photographer and do some video work, this slider has the perfect radius for product videos in the studio. It was very easy to figure out and I like the solid build. BUT, there is a low level whir sound as your camera travels... it is noticeable unless you move very very slow. I also recommend that you get the PMG-DUO Slider Clamp set so that you can leave it on a dedicated tri-pod, in fact get two of them so you can use two supports for heavier gear and even do an incline. The included carry case is very nice and will keep it from clanking around in your vehicle. The 36 inch size turned out to be perfect, I was toying with the idea of getting the larger size but though it would get in the way too much. The legs adjust perfectly for low shots or table top setups. I use it with full size DSLR cameras and audio gear, so it needed to be strong and I have no regrets there. The finish quality seems really well done and I hope it holds up for many years to come. Yes, I recommend it to professionals, in particular, it's heavy duty and is my new favorite slider.

FREDERICK D.

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

ProMediaGear PMG-DUO Specifications

  • Material of Construction

    CNC machined aircraft grade aluminum track

  • Travel

    28" / 71.12cm

  • Curve Radius

    72" / 182.88cm

  • Travel Angle

    58 deg.

  • Mounting Threads

    3/8"-16 and 1/4"-20, center at each end

  • Maximum Load Capacity

    < 20 lbs (9.07kg)

  • Dimensions

    Length: 32" / 81.28cm
    Total length with knobs: 35" / 88.9cm
    Width: 5.95" / 15.11cm
    Folded height: 1.5" / 3.81cm

  • Weight

    Slider body: 3.39 lbs / 1.53kg
    Carriage: 11.36oz / 322.05g
    Total weight: 4.51lbs / 2.045kg

  • UPC Code

    609456716123

About ProMediaGear PMG-DUO

FEATURED REVIEWS

Simple Well Made A Tad Noisy

By FREDERICK D.

I have some old sliders and wanted to get something new, so this looked like a pretty good upgrade. I'm a professional photographer and do some video work, this slider has the perfect radius for product videos in the studio. It was very easy to figure out and I like the solid build. BUT, there is a low level whir sound as your camera travels... it is noticeable unless you move very very slow. I also recommend that you get the PMG-DUO Slider Clamp set so that you can leave it on a dedicated...

View full Review

Solid, Functional, Smooth as Glass

By FREDERICK D.

I have had this slider with the motor and controller for years now. I use it about 3 times a week and it continues to work extremely well. I did purchase extra supports so I can attach this slider to a single heavy-duty tripod. The braces attach to the slider ends and back to tripod legs which make for a very stable platform. The slider is extremely well made and I can't imagine ever wearing it out, smooth as glass when manual or motor sliding. The radius is particularly helpful when panning ...

View full Review

The ProMediaGear PMG-DUO 32" Video Slider with Carrying Case combines both straight and curved tracks into a single slider body. This dual-action design lets you add traditional slider moves or dynamic parabolic moves simply by flipping the slider. The slider features built-in adjustable legs for table-top or ground-level use, as well as 3/8"-16 and 1/4"-20 mounting threads for use with tripods or light stands. Each leg is independently adjustable for leveling the slider on uneven terrain. The legs fold out for compact storage inside the included carrying case.

For increased strength and durability, the tracks are CNC machined from a solid block of aircraft grade aluminum. The carriage clamps onto either the straight or curved sides of the track and features four custom Delrin wheels, with two roller bearings inside each wheel for low resistance and a smooth sliding motion. A large knob releases the carriage from the track, for attachment to the other side, while a smaller knob locks it into place.

ProMediaGear PMG-DUO Features

  • 32" straight track
  • Curved track with 72" radius
  • Curved parabolic motion keeps the subject in focus and stationary in frame
  • Independently adjustable legs for table-top or ground-level use
  • 1/4"-20 and 3/8"-16 mounting threads in center and both ends of the track
  • Carriage with four wheels and eight roller bearings
  • Clamp and locking knobs on carriage
  • Legs fold down for easy storage
  • CNC machined aluminum track

Key Features

  • 32" straight track
  • Curved parabolic motion keeps the subject in focus and stationary in frame
  • Independently adjustable legs for table-top or ground-level use
  • 1/4"-20 and 3/8"-16 mounting threads in center and both ends of the track
  • Clamp and locking knobs on carriage
  • Legs fold down for easy storage

What's in the box:

  • ProMediaGear PMG-DUO 32 " Video Slider
  • Carrying Case
  • ProMediaGear 5 Year Warranty