















See Options
2 Year
$79.99
3 Year
$99.99
4 Year
$129.99
Need help? Ask our experts.
Review Summary
2020-12-21T02:16:12
I have had this slider with the motor and controller for years now. I use it about 3 times a week and it continues to work extremely well. I did purchase extra supports so I can attach this slider to a single heavy-duty tripod. The braces attach to the slider ends and back to tripod legs which make for a very stable platform. The slider is extremely well made and I can't imagine ever wearing it out, smooth as glass when manual or motor sliding. The radius is particularly helpful when panning across a product to show many angles while fixed on that axis. The attached feet are easy to swing down into position for tabletop use. With the motor assist, the motor does make some noise, so your audio pickup shouldn't be on the camera and will need to be placed between the slider and subject to avoid picking up that motor noise. It's expensive and worth every single penny. I would recommend getting the largest one you can afford. I would buy it again.
FREDERICK D.
2016-10-12T11:02:12
I have some old sliders and wanted to get something new, so this looked like a pretty good upgrade. I'm a professional photographer and do some video work, this slider has the perfect radius for product videos in the studio. It was very easy to figure out and I like the solid build. BUT, there is a low level whir sound as your camera travels... it is noticeable unless you move very very slow. I also recommend that you get the PMG-DUO Slider Clamp set so that you can leave it on a dedicated tri-pod, in fact get two of them so you can use two supports for heavier gear and even do an incline. The included carry case is very nice and will keep it from clanking around in your vehicle. The 36 inch size turned out to be perfect, I was toying with the idea of getting the larger size but though it would get in the way too much. The legs adjust perfectly for low shots or table top setups. I use it with full size DSLR cameras and audio gear, so it needed to be strong and I have no regrets there. The finish quality seems really well done and I hope it holds up for many years to come. Yes, I recommend it to professionals, in particular, it's heavy duty and is my new favorite slider.
FREDERICK D.
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
CNC machined aircraft grade aluminum track
44" / 111.76cm
60" / 152.4cm
42 deg.
3/8"-16 and 1/4"-20, center at each end
< 20 lbs (9.07kg)
Length: 48" / 121.92cm
Total length with knobs: 51" / 129.54cm
Width: 5.95" / 15.11cm
Folded height: 1.5" / 3.83cm
Slider body: 4.5 lbs / 2.04kg
Carriage: 11.04oz / 312.97g
609456716109
Simple Well Made A Tad Noisy
By FREDERICK D.
I have some old sliders and wanted to get something new, so this looked like a pretty good upgrade. I'm a professional photographer and do some video work, this slider has the perfect radius for product videos in the studio. It was very easy to figure out and I like the solid build. BUT, there is a low level whir sound as your camera travels... it is noticeable unless you move very very slow. I also recommend that you get the PMG-DUO Slider Clamp set so that you can leave it on a dedicated...
View full Review
Solid, Functional, Smooth as Glass
By FREDERICK D.
I have had this slider with the motor and controller for years now. I use it about 3 times a week and it continues to work extremely well. I did purchase extra supports so I can attach this slider to a single heavy-duty tripod. The braces attach to the slider ends and back to tripod legs which make for a very stable platform. The slider is extremely well made and I can't imagine ever wearing it out, smooth as glass when manual or motor sliding. The radius is particularly helpful when panning ...
View full Review
Take your videography to the next level with the ProMediaGear PMG-DUO 48" Video Slider. This innovative slider is expertly designed to provide both straight and curved tracking options, allowing for a wide range of cinematic effects from traditional linear slides to captivating parabolic movements. Simply flip the slider to switch between the two modes, enhancing the versatility of your shots.
Crafted with precision, the PMG-DUO slider boasts a robust CNC-machined aircraft-grade aluminum construction, ensuring durability and reliability for professional use. Its high-quality build is designed to support up to 20 lbs of equipment, making it suitable for a variety of cameras and accessories.
The slider's carriage is engineered with four custom Delrin wheels, each housing two roller bearings, to guarantee a smooth, low-resistance glide across the 48" track length. The large knob allows for quick release and attachment of the carriage to either the straight or curved sides, while the smaller knob securely locks it in place, ensuring stable and precise motion.
For on-the-go filmmakers and photographers, the PMG-DUO slider includes built-in adjustable legs, perfect for table-top or ground-level setups. Each leg can be independently adjusted, providing stability on uneven surfaces and allowing for creative angling. When not in use, the legs fold neatly for compact storage, and the entire unit can be safely transported in the included carrying case.
The slider is also equipped with versatile mounting options, featuring 3/8"-16 and 1/4"-20 threads to accommodate tripods or light stands. This flexibility makes it an essential tool for both studio and field productions.
Whether you're a seasoned professional or an aspiring creator, the ProMediaGear PMG-DUO 48" Video Slider with Carrying Case is a sturdy, high-quality, and versatile addition to your filmmaking arsenal. Elevate your visual storytelling with smooth, dynamic shots that captivate your audience.