




See Options
2 Year
$119.99
3 Year
$154.99
5 Year
$269.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
20 Hz - 20 kHz, +/- .5% at -15 dBv output
-3 dB at approximately 65 kHz
<.03% 20 Hz - 20 kHz at -30 dBv output
<.1% 30 Hz - 20 kHz at -15 dBv output
<.25% 20 Hz - 20 kHz at -15 dBv output
<-13 degrees at 20 kHz (ref. 1.0 kHz)
<4.5 microseconds (2.0 kHz square wave, 10%-90%)
<1.0 dB at 1.0 kHz
>1050 Ohms at 1.0 kHz
1080 Ohms at 10kHz
Nominal source impedance is 150 Ohms
<270 Ohms at 1.0 KHz
<300 Ohms at 10 kHz
Nominal output impedance is 1.0 KOhms
0 dBv at 20 Hz
4 dBv at 30 Hz
8 dBv at 50 Hz
MICROPHONE INPUT: Phoenix COMBICON plug-in screw connector accepts signals from low-impedance (150 Ohms nominal) microphones or similar sources. Input impedance (with 1.0 KOhms loads on DIRECT and ISO OUT) is approximately 333 Ohms
DIRECT OUTPUT: Phoenix COMBICON plug-in screw connector wired in parallel with MIC IN provides signal to feed mixer input
ISOLATED OUTPUT: Phoenix COMBICON plug-in screw connector provides floating transformer isolated low-impedance output to feed mixer inputs. Recommended load impedances: 1.0 KOhms
GND/LIFTS GND position connects pin 1 of MIC IN/DIRECT OUT to pin 1 of ISO OUT. LIFT position floats" ISO OUT. Used to reduce hum and buzz by eliminating ground loops and providing proper grounding for various Conditions
4.75 x 19 x 1.75" / 12.06 x 48.26 x 4.44cm
4.70lbs /2.13kg
Overcome the challenges of large sound reinforcement systems with the Pro Co Sound MS82 8 Channel 2 Way Rack Mount Microphone Splitter. This high-performance audio device splits signals from eight low-impedance microphones into two distinct outputs, allowing for the simultaneous feeding of two microphone preamplifiers from a single source.
Ideal for complex audio setups, the MS82 Microphone Splitter is a crucial component when your P.A. system microphones need to be connected to a stage monitor system, broadcast unit, or remote recording mixer. Its transformer isolation feature minimizes interference from electromagnetic and radio frequency interference (EMI/RFI) and ground loops, ensuring a clean, noise-free audio output.
The MS82 Microphone Splitter boasts of a wide, flat frequency response ranging from 20Hz to 20kHz, and a voltage loss of less than 1.0dB. This ensures ultra-low distortion and minimal ringing or overshoot, preserving the quality of your audio and enhancing transient response.
Equipped with Phoenix COMBICON plug-in screw connectors for MIC IN, DIRECT OUT, and ISO OUT, the MS82 offers easy and hassle-free setup. Its Pro Co MBT-1 transformer provides a floating, low-impedance output, while the double electrostatic shield and GND/LIFT switch ensure isolation and buzz-free operation in virtually any environment.
Constructed with rugged 16 gauge steel and aluminum, the MS82's durable "Uni box" enclosure is finished in a black texture powder coat with black anodized aluminum side channels. The Lexan front and back panel overlays feature easy-to-read control graphics, while the specially designed transformers inside deliver superb audio quality and unsurpassed noise rejection.
Designed to fit any standard 19" (482.6mm) rack, the MS82 Microphone Splitter is perfect for remote broadcast and recording operations. Its top-quality connectors and switches are built to withstand even the most demanding situations, providing reliable, trouble-free service. Expand your audio splitting system with the Pro Co Sound MS82 8 Channel 2 Way Rack Mount Microphone Splitter, a device that combines top-quality audio performance with superior isolation.
https://www.procosound.com/topic/warranty
800-253-7360