Peavey Classic 50 50W RMS 2x 12" Tube Combo Guitar Amplifier, 50Hz-15kHz Frequency Response, 3-Band Passive EQ, 120V AC Power

SKU: PV03323550

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Q&A

Questions & Answers

Reviews about this item

Review Summary

Peavey Classic 50 212 Specifications

  • Power Amplifier: Tubes

    Four 6BQ5/EL84's with 12AX7 driver

  • Power Amplifier: Rated Power & Load

    50 W RMS into 16 or 8 Ohms

  • Power Amplifier: Power at Clipping

    (5% THD, 1 kHz, 120 V AC line)
    50 W RMS into 16 or 8 Ohms
    (Bias must be reduced to measure) (Typically)

  • Power Amplifier: Frequency Response

    +0, -2 dB, 50 Hz to 15 kHz, at 40 W RMS into 16 Ohms

  • Power Amplifier: Hum & Noise

    No greater than 80 dB below rated power

  • Power Amplifier: Power Consumption

    200 Watt, 50/60 Hz, 120 VAC (Domestic)

  • Preamp: Tubes

    Two 12AX7's

  • Preamp: Normal Input

    Impedance: Very high Z, 470 kOhms

  • Preamp: Lead Channel (Post Gain at 10)

    Nominal Input Level: -40 dBV, 10 mV RMS
    Minimum Input Level: -70 dBV, 0.3 mV RMS

  • Preamp: Normal Channel

    Nominal Input Level: -17 dBV, 140 mV RMS
    Minimum Input Level: -28 dBV, 40 mV RMS
    Maximum Input Level: 0 dBV, 1.0 V RMS

  • Preamp: Preamp Bright Input

    Impedance: Very high Z, 470 kOhms
    +12 dB boost at 2 kHz

  • Preamp: Equalization

    Custom bass, middle, and treble passive-type EQ (Lead and Normal Channels)

  • Preamp: Effects Send

    Load Impedance: 1 KOhms or greater
    Nominal Output Level: -6 dBV, 0.5 V RMS

  • Preamp: Effects Return

    Impedance: High Z, 2 M Ohms
    Designed Input Level: -6 dBV, 0.5 V RMS
    (Switching jack provides Effects Send to Effects Return connection when not used)

  • Preamp: External Footswitch Function

    Reverb Defeat (when reverb control is raised)
    Normal/Lead Channel Select (when Lead activated)

  • UPC Code

    0014367614862

About Peavey Classic 50 212

With its responsive gain structure and warm/punch double-team of 12Ax7 and EL84 tubes, Classic Series guitar amps are revered by gritty blues benders, chicken pickin' country cats and nouveau-Stones rockers alike. These amps are available in vintage tweed with Blue Marvel speakers and knobs straight out of the rock 'n' roll revolution.

Peavey Classic 50 212 Features

  • Four EL84s and three 12AX7s
  • Fan cooled
  • 2-channel preamp
  • Normal and bright inputs
  • Pre- and post-gain controls on lead channel
  • Active presence control
  • 3-band passive EQ (bass, middle, treble)
  • Master volume control
  • Standby switch
  • Reverb level control
  • Effects loop
  • External speaker capability
  • Footswitch selectable channel switching and reverb (included)
  • Classic tweed covering
  • Chrome-plated chassis

Key Features

  • Four EL84s and three 12AX7s
  • 2-channel preamp
  • Normal and bright inputs
  • Pre- and post-gain controls on lead channel
  • Active presence control
  • 3-band passive EQ (bass, middle, treble)

What's in the box:

  • Peavey Classic 50 50W RMS 2x 12" Tube Combo Guitar Amplifier
  • Peavey 5 Year Warranty (2 Year + 3 Year with Registration)