
Review Summary
100 to 120V / 220 to 240V, 50/60Hz
25W Idling / 300W at 200W into 4Ohms
DDT speaker protection with defeat switch
Short Circuit protection
Thermal protection circuit
Current limit protection circuit
DC output protection circuit
4Ohms (Internal Speaker = 8Ohms)
1 Vrms (signal into return jack with master volume set to full CW)
Speaker Output Jack: 1x 1/4" jack in parallel with internal 15" speaker
8Ohms at 100W (28.4 Vrms)
4Ohms at 200W (27.0 Vrms)
Stereo 8Ohms minimum load
Power Output: 2 x 8Ohms 250 mW (1.41 Vrms)
Pre Gain: 5 (12 o'clock)
Bright: Out
Contour: Out
Low: 0 (12 o'clock)
High: 0 (12 o'clock)
Graphic EQ: All sliders set to center
Graphic EQ Switch = Out
Master Gain: 10 (fully clockwise)
DDT: Active
Input Selector Set to Active:
Nominal Input: -3.80 dBu
Minimum Input: -31.3 dBu
Maximum Input: 10.2 dBu
(Maximum signal at input before clipping)
D.I. XLR: Balanced output driven pre-EQ by buffered instrument signal
22.0 x 23.3 x 19.5" / 558.80 x 591.82 x 495.30mm
73.4lbs / 33.29kg
0014367154108
A 400w 1x15" bass guitar combo. Top loaded, kick back design. The 1/4" input has a bright switch and an active/passive switch. There's a pre gain knob and a contour switch for a pre-shape eq. A 2 band eq is next, with a 7 band graphic, with a defeat switch. An effects loop, footswitch input, master volume, tuner output and DDT on/off switch completes the front panel. The class D power drives a ceramic 15" speaker and hf tweeter.