JTL B-1020, 21'6" Wide Background Support System

SKU: JTB1020

This item is no longer available.

Overview
Compare
Specs
Q&A

Questions & Answers

William H : What is the size of the travel case that carries the system?WALLACE R : This is from memory. I haven't measured. 3 feet - 3.5 feet long 6-8 inch diameterCHARLES D : There are two canvas cases; both are about 39" long. One is about 6" in diameter, and the other is about 7" in diameter. Hope this helps.SHAWN C : It's the two black buffle bags. Each is about 6 inch diameter and about 40 inches long. I have had problems with the connectors coming apart in the cross bars.
BRIAN K : Anyone know where I can find assembly instructions?CORY B : Was not any in my box either. I had mine out for a half day and it broke. Careful having it all the way up and all the way out. Very weak on the upright polesDANIEL P : Not really necessary. Pole with the hole in the center is the middle. Half of them on one side then and the other half on the other side. Best to have three people raise it. If just one person then raise in small increments.
MORAD B : Can this support 9' x 20' Savage vinyl backdrop without sagging in the middle?ENOCH C : yes, but you might not need this width for that unless you plan to put it up horizontally, there is a center strut on this that keeps the center from sagging.ERIC S : it will not sag in the middle.MICHAEL B : Quick answer is "maybe". If you only use the two background stands and only a few segments you can likely get away with not having any sagging IF your vinyl backdrop is on a reinforced roll. If not, then no. It will support my 10'x20' and 20'x20' diamond cloth backdrops but there is some sagging in the middle where the segments meet. This product is great for the price but you have to be careful with it. I hope this helps.

Reviews about this item

Review Summary

2016-11-20T11:13:04

Rated 2 out of 5

Connectors fail occaisionally

I've had problems with the cross bar connections coming apart. making it impossible to connect the pipes together. If you are going to to set up and leave it then it's probably not an issue, but I take mine down and set it up every time and after a dozen or so uses the connectors started coming apart.

SHAWN C.

2016-09-18T04:27:10

Rated 3 out of 5

Gets the job done

This is a value priced large stand. It should be handled carefully since construction is not as robust as it should be. The top bar consists of multiple 40" sections. The mimimum length is 80", using 2 bars with holes on end. Be very careful when you lower or raise the bars when using most of the sections. The center bar with the hole in it is easily bent. The bar walls are thin and it can break easily if you crimp it.

R K.

2016-06-09T04:18:06

Rated 5 out of 5

Excellent Stand at a Great Price

I purchased this stand to ensure the background would be large enough to photograph large dance groups...up to 15 dancers. I used it to hang an all white, paper backdrop. The backdrop was 18 feet wide cross the horizontal bar and 24 long. The stand performed perfectly. The center vertical ensured that the backdrop did not sag. I attached the backdrop to the stand using white duct tape though the top was never visible in the photos.

FRED V.

2015-12-30T08:54:59

Rated 1 out of 5

Junk; sags with 10 pound - not with 75 pound as advertised

Junk; sags with 10 pound - not with 75 pound as advertised

ROHIT P.

2014-04-14T21:00:00

Rated 4 out of 5

Get a lot more for a lot less!

I am using this along with a large grey muslin to turn my dining room with nice wood floors into an instant studio. The stands are sturdy and the bags come with nice dividers for better loading and transport.

TIM L.

2013-08-27T21:00:00

Rated 5 out of 5

Works perfectly for wider backgrounds

I use this product to shoot a dance school. Have some very large groups involved and the background needs to be 32' x 24'. This has proven to be an essential tool for spanning backgrounds that wide. Although this kit, in and of itself, doesn't directly support backgrounds that large, it is adaptable enough to be able to with a few modifications. Very well constructed gear, easy to use, and has stood up to years of use. Had to buy a second kit for yet another large group and went immediately to this kit.

MICHAEL W.

2012-12-14T19:00:00

Rated 5 out of 5

Really Nice

This product is really nice.... really easy to use....and portable... try use this....

Daniel Y.

2012-11-11T19:00:00

Rated 5 out of 5

Great product

This product is really great....have so many bars... and great support...

Danny Y.

2012-05-15T21:00:00

Rated 4 out of 5

Excellent price for what you get!

I purchased this background stand kit to use with a 20x20 backdrop I recently purchased. There arent a whole lot of choices out there but I am glad I found this one. These stands are made from cheap materials and will not survive much abuse. With that in mind you have to be careful with them if you want them to last. The carry bags are awful! All of the zippers failed on the first time I used them leaving me with a chance that all of the stands and crossbars may fall out while being transported.

Michael B.

2010-02-19T19:00:00

Rated 4 out of 5

Great Support - Really

Great value out of the box. Stand height adjustment clamps required adjustment to ensure no slippage. Crossbar design is a compromise between the looser extension tube type and the type that requires allen wrench tightened sections. The bag has flimsy elastic loops to keep the crossbar sections secure; the more professional design would have individual pocket would be better and faster to use. The two-bag kit is just another piece to check at the airport. Should have been one larger bag. But if it had all those little things changed, it would cost twice as much.

Lance C.

2010-01-10T19:00:00

Rated 5 out of 5

excellent product

can be used as one unit or separated into two units

flippinphotographer

2009-11-03T19:00:00

Rated 5 out of 5

Great quality

Great background stand. wish I had bought one of these years ago.

sharon w.

2009-05-26T21:00:00

Rated 5 out of 5

Wide Background Support System

I needed a 20' wide background support system so that I could take pictures of a full class of kids. This product went up easy and with stood a bunch of preschool children running around it and jumping into the background. It actually handled it better than I did.

jedgar

2007-09-25T21:00:00

Rated 4 out of 5

Robust, easy to use

It's not the highest quality finish, but who cares? For the money, it's quite solid. The bags are kind of cheap but they also do the job. You can set the system up to be as long as a spar or two, or link all three together for the full 20'+ Oddly enough, I now realize I'd prefer to have an additional stand & spar combination (another one can fit in the second case) because when shooting static models, it's a benefit to have two blackout backdrops at ±90° angles. I'd never use it in a 27' long configuration...the flexibility of two backdrops would be great as part of the kit.

GREGORY K.

2007-05-15T21:00:00

Rated 4 out of 5

Good System

Good set up and easy to use. One of the Bag Zippers broke on the first use.

GARTH S.

2007-05-07T21:00:00

Rated 4 out of 5

Excellent for teams.

Really like the sturdy cross poles - they don't bow with the weight of the heavy, 24' wide backdrop.

patrician

JTL B-1020 Specifications

  • Bar Section

    7

  • Max Width

    20.6' (627.9cm)

  • Max Height

    10.6' (323cm)

  • Net Weight

    25 lbs (11.3kg)

  • Stand

    Aluminum, air cushion

  • Base Diameter

    40" (101.6cm)

  • UPC Code

    410000052303

About JTL B-1020

FEATURED REVIEWS

Excellent Stand at a Great Price

By FRED V.

I purchased this stand to ensure the background would be large enough to photograph large dance groups...up to 15 dancers. I used it to hang an all white, paper backdrop. The backdrop was 18 feet wide cross the horizontal bar and 24 long. The stand performed perfectly. The center vertical ensured that the backdrop did not sag. I attached the backdrop to the stand using white duct tape though the top was never visible in the photos.

Works perfectly for wider backgrounds

By MICHAEL W.

I use this product to shoot a dance school. Have some very large groups involved and the background needs to be 32' x 24'. This has proven to be an essential tool for spanning backgrounds that wide. Although this kit, in and of itself, doesn't directly support backgrounds that large, it is adaptable enough to be able to with a few modifications. Very well constructed gear, easy to use, and has stood up to years of use. Had to buy a second kit for yet another large group and went immediat...

View full Review

The heavy duty background support systems have been developed and built by JTL. These systems meet the special requirments of photographers who demand a device that has convenient operation and durability.

JTL B-1020 Features

  • Stands extend to 10'6" high.
  • 7 crossbars (included) together are 20'6" wide.
  • Sag proof cross bar supports 75 pounds
  • Portable kit weighs in at only 22 pounds
  • Easy and quick to set up in less than 3 minutes

Key Features

  • Stands extend to 10'6" high
  • 7 crossbars (included) together are 20'6" wide
  • Sag proof cross bar supports 75 pounds
  • Portable kit weighs in at only 22 pounds
  • Easy & quick to set up in less than 3 minutes

What's in the box:

  • JTL Air Stand (3)
  • Cross Bar (7)
  • Heavy Duty Carrying Bag (2)
  • JTL 1 Year Warranty