Viltrox EF-R2 Canon EF/EF-S Lenses to EOSR/EOSRP Cameras Mount Adapter

2022-09-21T13:20:55

Works as advertised. Solid connection, auto focus works, control ring works. Satisfied with this purchase.

JAMES C.

2021-09-03T08:35:54

Everything was perfect. Great experience

MARIA L.

2021-05-20T14:23:39

Good at the first time but when using long telephoto lens like 70-200 it will lost connection in the long term . But connections preety good for small prime lenses

kelvin v.

2021-04-28T09:56:21

Works great with all my Canon EF Lenses. A bargain for $99.99 !!

SANFORD S.

2021-03-30T10:37:07

For me work just fine!

BRIAN V.

2021-03-23T16:28:18

I attached it to my R6 with my EF lenses. Not a complete seal but it works and since the Canon version is backordered, I can shoot pictures.

MICHAEL H.

2021-01-06T09:47:33

Very good alternative for the original Canon brand. This works really well in adapting EF/EFS lenses into an R camera. Good online support with firmware upgrades for future lenses that has yet to come out. All of this for a lot less than the Original Canon brand. The picture I have came up with seem very good and have not notice any problem with focusing on the subject. The metal mount seems to hold up pretty good even with my Heavy 70-200 2.8 III L lens. I don't notice any wobble or any play between the camera and the lens mounting. I recommend this for those on the budget and wanted to switch into the Canon R series camera since the Canon adapter is always out of stock.

JOEL V.

2020-12-01T07:45:32

This adapter works perfectly. It’s great being able to use all of my Ed lenses with my RP. Very thin profile. Auto focus works perfectly with this adapter. Highly recommended.

FRANK M.

2020-10-14T08:13:57

This adapter works well with my 70-200mm f/2.8 L lens on my EOS R6. Autofiocus is dead-on and the lens functions well with this adapter. The only minor flaw that I found concerns the locking pin. After connecting the lens there is a little bit of play at the mount. The lens fits tightly face-to-face but I am able to rotate it slightly. Doesn't seem to affect anything, just a little annoying.

RON S.

2020-09-17T13:58:09

Does what it says it does. Tested it on three lenses on my RP. An all manual (no electrical contacts) 14MM, an ef-40mm F2.8 and the EF-S 55-250 STM. Worked on all three, I set the control ring to control aperture and that works on the 40MM and 55-250MM lens. The fitting to the camera body is solid with no play, but the lens fitting allows a small amount of twisting wiggle. This bothers me a little as I suspect in poor air conditions dust might creep in. So, when the simple canon adapter get's out of back order I will get one of those. In the meantime I will use the Viltrox in good air conditions.

WAYNE W.