2023-05-09T20:00:00
Rated 5 out of 5
Great product, easy to install
Great product, easy to install and very accurate.
Samuel C.
Originally posted at
2023-05-04T20:00:00
Rated 5 out of 5
Small Cylinder
The cylinder looks OK, but the metering stem seems the numerals got double stamped. Not happy about that. It'd almost like there are blurred.
Marc C.
Originally posted at
2023-05-03T20:00:00
Rated 5 out of 5
RCBS was a grate help
RCBS was a grate help to get new small cylinder number so I could get it ordered . New cylinder came in a reasonable time ,fit and work grate .
Clifford H.
Originally posted at
2023-04-27T20:00:00
Rated 5 out of 5
It works as designed.
The fit and finish is great.
Pete T.
Originally posted at
2023-02-15T19:00:00
Rated 5 out of 5
perfect fit
precisely make tool works as it should
Dan C.
Originally posted at
2022-12-03T19:00:00
Rated 5 out of 5
Small Measure Cylinder Assembly
These are nicely made from hardened steel. They cut cleanly and will last a very long time. Thumbs up!
EARL H.
Originally posted at
2022-02-27T19:00:00
Rated 5 out of 5
RCBS small measure cylinder assembly
The small cylinder has helped with control of powder amounts. I am using the old Unique powder which is hard to control due to being a flake powder. Along with powder baffle it has improved the control of my powder loads for 380acp which are under 4 grains of powder.
Ron C.
Originally posted at
2022-01-08T19:00:00
Rated 5 out of 5
Fast shipping and well packaged.
Fast shipping and well packaged. Works good for small pistol charges.
Thomas D.
Originally posted at
2021-11-25T11:18:19
Rated 5 out of 5
Works fine and is easy to adjust for pistol loads.
Have used this powder measure for pistol loads, works great. I bought mine with the large powder measure but it doesn't meter down far enough for pistol loads.
ROBERT F.
2021-09-10T20:00:00
Rated 5 out of 5
just what I needed
just what I needed
brian g.
Originally posted at
2021-08-03T20:00:00
Rated 5 out of 5
Uniflow measure cylinder Small
Have used the RCBS Uniflow for years, but difficulty throwing small charges of Unique consistently. The small cylinder just purchased solved this problem. Now can thrown 4grs +/- 0.1 gr. Very satisfied with this item.
Clifton O.
Originally posted at
2021-02-01T19:00:00
Rated 5 out of 5
Uniflow pistol cylinder
I have been an RCBS fan for decades and have used the Uniflow meter for all calibers even for pistol charges in the 5 grain range. It has ALWAYS been accurate but I finally wanted to try the pistol cylinder anyway. It swapped out easily and seems to be very accurate with small charges even with Bullseye below 5 grains. If anyone uses the Uniflow meter with ONLY the large cylinder, do NOT be afraid to throw small charges as it's still very accurate, but I would not recommend super light throws without the pistol cylinder. Ball powders meter like water and I load MANY 5.5 grain Unique loads accurately with the large cylinder.
Gary C.
Originally posted at
2017-05-16T19:11:37
Rated 5 out of 5
Definitely buy one!
I'm brand new to using a powder dropper so I'm not sure if the inconsistencies were me or the device but I would recommend buying this for handgun loads any day. For precision loads you can throw a charge, put it on the scale and trickle in the correct amount. Good product so far and I look forward to using it for years!!!
JASON P.
2016-03-24T14:45:31
Rated 4 out of 5
A must for most pistol/revolver loads...
I bought the RCBS Uniflow Powder Measure (Standard) to replace a same model that was 40 years old and was showing its age. The standard drum was too large to throw the small powder charges necessary to load some pistol rounds. The smaller drum is a must for these loads, but is large enough to load some rifle rounds, as well. Installation was easy. It handles ball and flake powders flawlessly, but it will cut cylindrical powders, resulting in charge deviations. The best way to fix this is to throw a charge a couple of grains shy of the desired load and use a powder trickler to top it off.
RICHARD G.
