This item is no longer available.
RCBS UNIVERSAL CASE PREP CENTER - OUTSTANDING
I love this case prep center! RCBS always makes great products. I was short on bench top space, to I mounted it to a piece of 3/4 inch plywood that I clamp to my work bench when I'm using this machine. There are some good video demos of the RCBS Universal Case Prep Center being used on U-TUBE, which I found helpful, but it's really very straight forward to use. I particularly like the case trim feature. I found I could set it up and trim cases much more precisely than I'd been able to wi...
View full Review
The RCBS Universal Case Prep Center, 110 Volt allows volume reloaders to quickly trim and prep enormous volumes of cases quickly and effortlessly. The 24-VDC motor provides up to 360 RPM and 9 inch-pounds of torque. Reloaders can harness all of the power and adjust it to their specifications by adjusting the units output shaft RPM's. This unit features the spring-loaded feed system for hands-free trimming where a single lever loads and unloads cases then disengages them from the cutter.
The Universal Case Prep Center will work for either right or left handed reloaders, work for cartridges with case heads from .250 to .625" and overall lengths from .720' to 3.375". There is a micrometer adjustment for fast, precise cuts and the shellholder assembly makes adjusting the trim length quick and easy. There are six stations available for case preparation, four turning at 360 RPM and two turning faster at 550 RPM. Reloaders can add a number of other accessories (sold separately) to the unit to form other case preparation functions like removing military crimps from brass, uniforming primer pockets, cleaning case necks and deburring flash holes.