RCBS Universal Case Loading Block

2025-05-19T20:00:00

Works great, nice having both sides for different caliber casings

Alan H.

Originally posted at

2025-02-17T19:00:00

Works good. It was what I needed for the larger cases that I load.

Scott S.

Originally posted at

2023-12-10T19:00:00

I have a few different reloading blocks from different materials (plastic, wood, metall) and this is good block :) I buy it on rcbs. com website

Vladimir M.

Originally posted at

2023-11-29T19:00:00

I have blocks from every manufacturer out there old and new and this is the best of the bunch IMO cases seem to fit better in these. The material is good as well, but I did drop one on the floor and the top portion shattered while the "extended" shell holder portions were mashed in on the portion that contacted the hardwood floor so I'm not sure why the material seemed to exhibit different levels of hardness throughout the plastic. That said just don't drop them and you'll be fine with this block.

MeanBeanBellaJean

Originally posted at

2023-11-29T19:00:00

I have blocks from every manufacturer out there old and new and this is the best of the bunch IMO cases seem to fit better in these. The material is good as well, but I did drop one on the floor and the top portion shattered while the "extended" shell holder portions were mashed in on the portion that contacted the hardwood floor so I'm not sure why the material seemed to exhibit different levels of hardness throughout the plastic. That said just don't drop them and you'll be fine with this block.

Mean J.

Originally posted at

2023-04-21T20:00:00

I like this Block because it has shallow but stable holding abilities. I also like the blue Frankford Arsenal loading block for the separation of brass.

Bradley C.

Originally posted at

2023-02-05T19:00:00

Holds 45-70 as is should.

Jimmy W.

Originally posted at

2023-02-05T19:00:00

Holds 45-70 as is should.

Jimmy

Originally posted at

2022-03-14T20:00:00

Thses are so very handy to load powder into the cases, they are stable and hold the cases very well. This is my 2nd one.

Danny S.

Originally posted at

2022-03-14T20:00:00

Thses are so very handy to load powder into the cases, they are stable and hold the cases very well. This is my 2nd one.

Tanya S.

Originally posted at

2021-10-16T20:00:00

I reload a lot so I use these a lot. Great product. I like for the way the stack on each other. Well worth the money.

thomas g.

Originally posted at

2021-10-16T20:00:00

I reload a lot so I use these a lot. Great product. I like for the way the stack on each other. Well worth the money.

Thomas G.

Originally posted at

2021-10-08T20:00:00

Slightly bulky but great in every other way. Holds the case firmly enough to use the Satern funnels without the case tipping over while pouring

THEODORE M.

Originally posted at

2021-10-08T20:00:00

Slightly bulky but great in every other way. Holds the case firmly enough to use the Satern funnels without the case tipping over while pouring

Ted 2.

Originally posted at

2021-09-29T20:00:00

Great

Jeremy P.

Originally posted at

2021-08-12T20:00:00

Checked with all our calibers and there is a position for each. (223, 22-250, 308, 30-06, 300 mag, 9mm). The nice thing is that for pistol calibers, they fit in the raised pockets, and the rifle calibers typically fit in the recessed pockets. Otherwise, the pistol cases would be too short to remove easily from the recessed pockets.

Scott S.

Originally posted at

2021-07-05T20:00:00

Its works good. Its a little larger then i thought but after using it seems to be size appropriate. Has a hole in the top edge so you can hang it out of the way when not in use.

Jeff

Originally posted at

2021-02-08T19:00:00

Awesome service super fast shipping thanks

tyson a.

Originally posted at

2021-02-08T19:00:00

Awesome service super fast shipping thanks

Ty T.

Originally posted at

2020-12-01T19:00:00

It's ok, but I wouldn't call it universal. Some cartridges are pretty wobbly in the holder, especially 223/556 , 243 etc

Larry C.

Originally posted at