
See Options
2 Year
$119.99
3 Year
$154.99
5 Year
$269.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
RJ45 Neutrik etherCON
Dante
100 Mbps
44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
24 bits
-20 dBFS = +4 dBu
0 dBFS = +24 dBu
XLR (female)
Mic: 40 dB (LO), 48 dB (MED), 62 dB (HI);
front-panel selectable
Mic: -36 dBu (LO), -44 dBu (MED), -58 dBu (HI)
Mic: -16 dBu (LO), -24 dBu (MED), -38 dBu (HI)
> 2.5 k Ohm
P48, 48 Vdc
IEC 61938: 2013
20 Hz to 20 kHz ( +/- 0.5 dB)
-130 dBu (62 dB gain); -132 dBu A-Weighted
Mic: < -72 dB (LO), < -72 dB (MED), < -68 dB (HI)
< 0.1% (20 Hz to 20 kHz, +4 dBu/-20 dBFS);
0.015% at 1 kHz (typ)
> 65 dB (50 Hz to 120 Hz)
Below Noise Floor
(20 Hz to 20 kHz at operating level,
any input to any input, max. mic gain)
Ethernet Link and Speed (2, rear panel);
Sync (front panel);
dual-LED VU meter (8 LED, front panel)
32 Degree F to 122 Degree F (0 Degree C to 50 Degree C)
PoE Class 0, IEEE 802.3af
Gain/Level: +/- 1 dB; Source termination: 150 Ohm;
A to D values measured in digital domain
5.19 x 1.68 x 5.97" (13.18 x 4.27 x 15.16cm)
1.6 lbs (700g)
The AV-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the AV-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range. P48 phantom voltage is supplied to each microphone input. The AV-XMN4 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance.
The AV-XMN4 may be powered from an external 24 Vdc power supply, available separately. The AV-XMN4 is equipped to operate from a PoE enabled network switch. The AV-XMN4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-XMN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The AV-XMN4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.