Rollei 66 Dual-P Multi Format Slide Projector - 35mm/6x4.5/6x6 AF with Fade control comes with 2 lamps & magazine

The Rolleivision 66 dual P is a projector that is geared precisely to the needs and wishes of its users. A true multi format projector for slide mounts with outside measurements of 7 x 7 and 5 x 5 cm for the most common negative formats of 6 x 6, 4.5 x 6, 4 x 4 and 24 x 36 mm. It is a unique projector with innovative technology, sophisticated features and an excellent range of lenses.

Compact slide projector for two slide and two magazine formats. Picture formats up to 6 x 6 cm in standard 77 magazines or Rollei CM 77/ 30 inter-connectable magazines; picture formats up to 4 x 4 cm in standard 55 magazines or Rollei CM 55/ 50 inter-connectable magazines.

Flat, compact housing with open magazine track. Chassis of die cast aluminum. Microprocessor-controlled individual motor drives for slide change, magazine transport and focusing (Rollei MSC tech-nology). Accurate, steady picture through precision slide control. Optical slide recognition (äno slide - no light").

Standard 77 magazines for 30 7 x 7 cm slides or standard 55 magazines for 36 or 50 slides (DIN 108). Particularly recommended: Rollei's CM 77/ 30 or CM 55/ 50 inter-connectable magazines for uninterrupted projection.

Forwards and backwards automatically by push button, forwards by timer, program or synchronizer for tape recorder control. Auto reverse, three timer times, autofocus off, diaphragm shutter.

Autofocus with override function and manual setting. Fixed slide screen times of 4, 8 and 12 sec for automatic projection. Easy-to-read LEDs for the various modes. Bright illuminated monitor for slide pre-view. Hand-held control unit, detachable from projector for IR remote control using multi-channel technology (slide change forwards/ reverse, slide screen time, AF override, memo for slide selection, fade-in and out, cut-off). Independent operation powered by 9V battery pack.

Two 24V/ 250W halogen lamps with G 6.35 - 15 in fixed socket. Height of the light filament can be adjusted. Lamp output can be reduced in 5 % stages with five-step dimmer, automatic changeover to spare lamp in case of lamp failure. Concave mirror, heat filter, aspherical condenser lens at the rear, spherical con-denser at the front, interchangeable condenser lens for optical lenses from f = 250 mm.

Quiet axial fan for reliable cooling. Side vent, cooling continues with lamp switched off. Mechanical and thermal overload cut-out.