
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
1 mile radio range
2.4GHz radio
270 Degree lens mapping
Required, not included
Lithium-Ion
1
Non-universal
Made from lightweight aluminum
Black anodize finish
8 oz (227g)
Any compatible 12-18v DC power source
0.8 mod 32 drive gear
Integrated flexCable to MoVI Pro
Integrated flexCable to 7-pin digital motor
3.15 x 1.18 x 0.71" (80 x 30 x 18mm)
4.23 oz (120g)
18" (457mm)
6-pin to 6-pin
0.8 mod 32 film pitch gearing
Length: Fits lenses up 12.5" (318mm) (circumference of focus ring)
Width: 3/8" (10mm)
0.42 oz (12g) (Full size, weight reduced when cut to size)
3 pin metal push/pull connector for finger wheel
5 pin metal push/pull connector for microRemote
24" (61cm)
2 oz (57)
D-Tap Connector for power input
2 pin metal push/pull connector for power output to microRemote
24" (61cm)
2 oz (57)
Made from white delrin
15 x 12 x 7" (38.1 x 30.5 x 17.8cm)
5 lbs 5 oz (2.4kg)
Master Creative Focus Control
Add better creative focus control to your videos with the microRemote Tandem Deluxe Bundle. The award-winning microRemote gives you the ability and confidence to shoot lenses wide open, using selective focus for great production value. Powerful motors snap focus where you want it, while still being quiet and smooth enough to use anywhere.
It's ready to deliver great results whether you are an assistant cameraman pulling focus from a monitor across the set, or a solo operator on a handheld rig, gimbal, or jib. The microRemote is a proven performer, helping thousands of productions worldwide. If you need a high performance quality focus system that can be used for wirelessly or on the rig, and includes the accessories that make it even better, the Tandem Deluxe Bundle is right for you.
Tandem: Wireless when you want it, and Fingerwheel when You're Shooting Solo
This bundle comes with both of our popular controllers: the wireless hand unit is for dedicated focus pulling with a range of up to 1 mile line of sight. The fingerwheel is perfect when you are opearting alone and want creative focus control at your fingertip; great for handheld, shouldermount, and jib/crane shots. Change between remote or operator with a flick of a switch, you never have to disconnect anything. Redrock is the only bundle that gives you both options.
Works with the Gear You Already Have
Unlike other solutions, the microRemote works with virtually every camera and lens. It's small and light enough to work on any rig including popular DJI Ronin and Freefly MoVI gimbals. The handy remote camera start/stop cable (optional) triggers camera record for popular camera models including Sony, Canon, Red, Arri, and many others with industry-standard LANC. the microRemote will match the power you have available: Any p-tap battery, Freefly MoVI lipo, DJI Ronin, and is the only remote focus that can use Canon compatible LP-E6 DSLR batteries.
- microRemote Handheld Controller -
Wireless Focus Control
The microRemote handheld controller is a professional-level wireless device loaded with features that make focusing easier and more intuitive. Add the Handheld Controller to your microRemote system and achieve focus control in virtually any situation where it's difficult to pull focus directly from the camera: steadicam, jib arms, cranes, or just to have some extra room around the camera.
By controlling focus wirelessly you remove the need to directly touch the camera during a shot, but still control focus to direct your viewer's attention. By untethering your camera from a direct follow focus, unique and creative shots can be achieved using a Steadicam or MoVi that would otherwise be impossible.
In situations where wireless may not be possible or allowed, the optional tethering cable wires the microRemote for direct, interference-free operation up to 20ft away.
- Fingerwheel Controller -
270 Degrees of Rotation
The microRemote Fingerwheel Controller is a beautifully crafted, precise focus controller for the microRemote designed so operators can easily control focus from their hand grip.
The fingerwheel controller attaches to the microHandGrip and provides a full 270 degrees of rotation (with built-in hard stops), an exquisite, smooth feel with just the right amount of drag, and delivers precise, accurate focus pulls. In addition, the fingerwheel is a great controller for jib and crane operation.
- SLS - Lens Motor for microRemote -
Ounce for Ounce, the Lightest Most Powerful Lens Control Motor
To create this next-generation lens control motor, we analyzed countless hours of real-world focus performance and listened to feedback from hundreds of remote focus customers. In addition to responsive and reliable performance, we heard smaller cameras and rigs required things to get smaller... a lot smaller.
SLS is so good you'll want to use it on every shot. Fortunately it's small and light enough to keep it on your camera full time. If you are looking for professional performance lens control for your gimbal, as an upgrade to your existing microRemote or other compatible system, or if you want the latest miniaturized technology, SLS is the motor for you.
Featherweight without Compromise
With SLS, we reduced weight everywhere we could without compromising performance. At only 120 grams, you get incredible responsiveness with minimal added bulk. Nothing comes close to the SLS' weight-performance ratio. SLS is exceptional for gimbals and drones, where every saved ounce translates to longer run times and less fatigue.
The weight reduction analysis of SLS was so exact we had to switch from ounces to grams to measure impact of additional design changes. SLS is the lightest professional lens control motor available an engineering feat in itself and without concessions on size and performance. We were even able to add a lens light feature so you can see your lens marks in dim light or darkness.
Any Smaller and We'd Have to Go Quantum
To get SLS this small, we had to completely rethink motor housings. We jettisoned everything that wasn't absolutely necessary. It's as close-to-the-metal as you can get.
Small size doesn't just mean 'tucked away'. SLS is so small you can think of it as a full time extension of your camera, and keep it attached 24/7. Whatever rig or shot you are working with, SLS can be used with the relevant Redrock controller for solo operation or wireless remote control. When paired with the Redrock Rhino Mount, SLS delivers all this with no added footprint. A motor this small is also ideal for rigs where space is a premium: particularly underwater housings, drones, gimbals. It's even a great match for ultra-compact and mirrorless cameras.
Powerful Beyond Its Size
SLS isn't just a small package, the completely new motor delivers a powerful performance punch. With a huge increase in torque and double the resolution, SLS is redefining expectations of what a lens motor should be.
- microTape to microRemote Basestation Power Cable -
Power the microTape via microRemote
With this 18" power cable for the microTape that runs power from the microRemote BaseStation
- Air Lens Gear -
Air Lens Gears - 66% lighter, 200% smaller, 100% what you want
Air Lens Gears are the best way to adapt still lenses for motion and cinema. These lens gears add lightweight precision gearing for accurate and repeatable focusing using a follow focus or wireless remote, and are small enough to leave on even when shooting stills. If you use still photo lenses for video and need lens gears that are top performers, small and light, and a great value, Air Lens Gears are for you.
The Best Way to Use Still Photo lenses for Motion and Cinema
Gearing your still lenses is essential to give you precise, repeatable focus pulls for video and cinema. The Air Lens Gears are designed with a unique lubricated nylon that wraps around your lens' focus ring and applies gentle, even pressure for non-slip performance. Air Lens Gears have industry-standard 0.8 gearing that works with any focus system including Redrock's microFollowFocus, microRemote and Eclipse. Your lens is not modified in any way, and Air Lens Gears can be easily removed. But you won't need to: they are small and light enough that you can leave on all the time, whether you are shooting motion or stills.
- Fingerwheel Controller flexCable & P-Tap Power flexCable for microRemote -
Get the Most from Your Rig
flexCables are the perfect upgrade for using your Redrock microRemote or powerPack on gimbals such as Freefly MoVI, DJI Ronin, Letus, Defy, and others. flexCables minimize drag and weight while keeping your connections secure. If you use the microRemote with any gimbal setup, or if you are looking to add the our powerPack for safely powering all your gimbal accessories from a single battery, flexCables are the best solution available.
Lighten the Load
flexCables are 35% lighter than other cables. Lighter weight means less effort and long run times with your gimbals. This weight reduction is due in large part to the unique ultralight cable sheathing that still protects cables and connections to deliver top-notch reliability.
- Illuminated Marking Disk -
Additional Marking Disk
The microRemote Illuminated Marking Disk is a replacement or extra marking disk for use with the microRemote. Additional disks can be use to setup accurate marks for each of your lenses: when you change lenses you change out the marking disk for that specific lens.The marking disk includes a locator pin hole so they are always placed in the same position. Add the optional flares and this marking disk will glow for night time or dim light shooting situations.
Please Note: This marking disk is only for use with the microRemote.
- Flares for Marking Disk -
Use with Illuminated Marking Disk
Flares give the "glow" to your marking disk for your microFollowFocus Black. Flares are activated by "snapping" them, which starts the glow. Each flare lasts approximately 2-8 hours, depending on ambient temperature.
- microRemote Carrying Case -
Transport
The microRemote Carrying Case is the perfect solution to transport and store your microRemote remote focus system.
Airtight
The hard case is made of impact-resistant polypropylene to keep the microRemote safe during transport or storage. The shell is manufactured to the most demanding specifications, and is waterproof (to 30'), rustproof, crushproof and airtight.