Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.

Sennheiser Dante ME 36 Hypercardioid/Lobe Pre-Polarized Condenser Gooseneck Microphone Kit, Includes SL DI 4 XLR Dante Interface and 4x MAT 133-S Table Stands

SKU: SEDANTEKME36

This item is no longer available.

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

Sennheiser Dante ME 36 Kit Specifications

Dante Interface

Dante Interface

Jump to...
  • Input Type

    Balanced and RF filtered

  • Gain

    0dB, +15dB, + 30dB, +45dB, software selectable
    10dB pad, software selectable

  • Input Impedance

    >1.8KOhms at any gain

  • Maximum Input Levels

    +18dBu at 0dB gain, with pad
    +8dBu at 0dB gain, no pad
    -7dBu at +15dB gain, no pad
    -22dBu at +30dB gain, no pad
    -36dBu at +45dB gain, no pad

  • Phantom Power

    +48V, 10mA per input, software selectable

  • EIN

    -113dBu

  • System THD+N

    < 0.02% at any gain
    Input signal 3dB below maximum

  • Frequency Response

    20Hz - 20kHz

  • Physical Level

    Standard Ethernet

  • Connector

    Single RJ-45

  • Cable Quality

    CAT-5

  • Transmission Speed

    100Mbps

  • Daisy Chain

    2 units when powered by 802.3af PoE
    3 units when powered by external +12 V DC power supply (Sennheiser NT 12-50CS)

  • Power Requirements

    Class 0 802.3af PoE PD compliant +12VDC

  • Power Consumption

    2.7 W (225mA) at +12V DC, no phantom power
    5.5W (460mA) at +12V DC, 10mA phantom power load per input

  • Operating Temperature

    0 to 40 deg. C (32 to 104 deg. F)

Table Stand

Jump to...
  • Phantom Power

    P24

  • Current Consumption

    3.7mA

  • Connectors

    Mic In - XLR-3F
    Mic Out - XLR-3M

  • Pin Assignment Out

    XLR-3M out:
    1 = Gnd
    2 = Audio +
    3 = Audio -

  • Pin Assignment In

    XLR-3F In:
    1 = Gnd
    2 = Audio +
    3 = Audio -

  • LED Light Ring Color

    Red/green

  • Microphone Modes

    Toggle on / off
    Push to mute
    Push to talk
    permanent on

  • Connection

    Clip contact for logic

  • Pin Assignment Logic Connector

    Trigger signal at the logic connector:
    Logic in (external LED control)
    GND
    Logic out (switch signal)

  • Operating Temperature

    -10 to 50 deg. C (14 to 122 deg. F)

Gooseneck

Jump to...
  • Phantom power

    P12-P48

  • Connector

    XLR3

  • Diameter

    6mm (0.24")

  • Length

    150mm (5.91")

Condenser Microphone Capsule

Jump to...
  • Transducer principle

    Pre-polarized condenser microphone

  • Acoustics

    Hypercardioid / lobar

  • Frequency Response

    40Hz - 20kHz

  • Minimal Terminating Impedance

    1kOhms

  • Maximum sound pressure level

    130dB SPL

  • Equivalent Noise Level

    23dBA
    Weighted as per CCIR 468-3:34dB

  • Phantom Power

    P12-P48

  • Current Consumption

    250muA

  • Diameter

    8.2mm (0.32")

  • Length

    96mm (3.78")

General

Jump to...
  • Dimensions (WxHxD)

    Dante Interface: 219 x 38 x 120mm (8.62 x 1.50 x 4.72")
    Table Stand: 120 x 170 x 43mm (4.72 x 6.69 x 1.69")

  • Weight

    Dante Interface: 1.7 lbs (0.77kg)
    Table Stand: 2.66 lbs (1.21kg)
    Gooseneck: 73g (2.58 oz)
    Condenser Microphone Capsule: 17g (0.60 oz)

  • UPC Code

    615104313330

About Sennheiser Dante ME 36 Kit

The Dante-Kit ME 36 includes the SL DI 4 XLR as well as four times the combination of the MAT 133 table stand, the MZH 3015 gooseneck and the ME 36 condenser microphone capsule. This Dante-Kit is designed especially for microphone installations in meeting- and conference rooms. The MAT 133-S is a rugged and unobtrusively designed table stand. It provides a stable ground for the metal gooseneck MZH 3015 with a length of 150 mm for use with the ME 34, ME 35 and ME 36 microphone heads. The rugged gooseneck is fitted with a balanced, floating XLR-3 output, enabling the microphone to be powered by the SL DI 4 XLR.

The ME 36 is a condenser microphone capsule. This mini shotgun microphone features for an outstanding background noise rejection. The SL DI 4 XLR four input Dante-preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.

Sennheiser Dante ME 36 Kit Features

  • Highest speech-intelligibility
  • Phantom power via PoE
  • Remote controllable gain level
  • Daisy-chaining possible

What's in the box:

  • Sennheiser SL DI 4 XLR Dante Interface
  • 4x MAT 133-S Table Stands
  • 4x MZH 3015 Goosenecks
  • 4x ME 36 Condenser Microphone Capsules
  • Sennheiser 2 Year Limited Warranty