Sennheiser Dante MEB 114-S Boundary Microphone Kit
See all Sennheiser items

Sennheiser Dante MEB 114-S Cardioid Pre-Polarized Condenser Boundary Microphone Kit, Includes SL DI 4 XLR Dante Interface

SKU: SEDKMEB114S
Be the first to review this item

This item is no longer available.

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

Browse our FAQ

See Terms & Conditions

Sennheiser Dante MEB 114-S Kit Specifications

Dante Interface

Dante Interface

Jump to...

  • Input Type

    Balanced and RF filtered

  • Gain

    0dB, +15dB, + 30dB, +45dB, software selectable
    10dB pad, software selectable

  • Input Impedance

    >1.8KOhms at any gain

  • Maximum Input Levels

    +18dBu at 0dB gain, with pad
    +8dBu at 0dB gain, no pad
    -7dBu at +15dB gain, no pad
    -22dBu at +30dB gain, no pad
    -36dBu at +45dB gain, no pad

  • Phantom Power

    +48V, 10mA per input, software selectable

  • EIN

    -113dBu

  • System THD+N

    < 0.02% at any gain
    Input signal 3dB below maximum

  • Frequency Response

    20Hz - 20kHz

  • Physical Level

    Standard Ethernet

  • Connector

    Single RJ-45

  • Cable Quality

    CAT-5

  • Transmission Speed

    100Mbps

  • Daisy Chain

    2 units when powered by 802.3af PoE
    3 units when powered by external +12 V DC power supply (Sennheiser NT 12-50CS)

  • Power Requirements

    Class 0 802.3af PoE PD compliant +12VDC

  • Power Consumption

    2.7 W (225mA) at +12V DC, no phantom power
    5.5W (460mA) at +12V DC, 10mA phantom power load per input

  • Operating Temperature

    0 to 40 deg. C (32 to 104 deg. F)

Boundary Layer Microphone

Jump to...

  • Transducer principle

    Pre-polarized condenser microphone

  • Acoustics principle

    Boundary layer microphone

  • Pick-up Pattern

    Cardioid

  • Frequency Response

    40Hz - 20kHz

  • Nominal Impedance

    200Ohms at 1kHz

  • Sensitivity

    10mV/PA

  • Maximum Sound Pressure Level

    140dB

  • Equivalent Noise Level

    29dB (A)
    Rated as per CCIR 468-3: 39dB (CCIR)

  • Dynamic Range

    111dB (A)

  • Phantom Power

    P24-P48

  • Current Consumption

    5.3mA

  • Connectors

    Mic Out - tiny XLR-3M

  • Logic out

    High level output voltage >2.4 V
    Low level output voltage >0.4 V

  • Logic In

    High level output voltage >2.0 V
    Low level output voltage >0.8 V

  • LED Light Ring Color

    Red/green

  • Microphone Modes

    Toggle on / off
    Push to mute
    Push to talk
    Permanent on

  • Connection

    Clip contact for logic

  • Pin Assignment Logic Connector

    Trigger signal at the logic connector:
    Logic in (LED control)
    GND
    Logic out (switch signal)

  • Operating Temperature

    -10 to 50 deg. C (14 to 122 deg. F)

General

Jump to...

  • Dimensions (WxHxD)

    Dante Interface: 219 x 38 x 120mm (8.62 x 1.50 x 4.72")
    Boundary Layer Microphone: 85 x 100 x 25mm (3.35 x 3.94 x 0.98")

  • Weight

    Dante Interface: 1.7 lbs (0.77kg)
    Boundary Layer Microphone: 291g (10.26 oz)

About Sennheiser Dante MEB 114-S Kit

The Dante-Kit MEB 114-S includes the SL DI 4 XLR and four MEB 114-S boundary microphones. This Dante-Kit is designed especially for microphone installations in meeting- and conference rooms. The MEB 114-S is a sturdy on-table boundary layer microphone that constitutes an improvement for any conferencing system. It features a programmable microphone button and a bi-color LED ring for status indication. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114-S ensures the best speech intelligibility.

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.

Sennheiser Dante MEB 114-S Kit Features

  • Great speech-intelligibility
  • Phantom power via PoE
  • Remote controllable gain level
  • Daisy-chaining possible

Join VIP PRO

Earn 2X Points + Exclusive Perks!

Sell or Trade your Gear

Get started in 3 easy steps

What's in the box:

  • Sennheiser SL DI 4 XLR Dante Interface
  • 4x MEB 114-S Boundary Layer Microphones
  • Sennheiser 2 Year Limited Warranty