
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Balanced and RF filtered
0dB, +15dB, + 30dB, +45dB, software selectable
10dB pad, software selectable
>1.8KOhms at any gain
+18dBu at 0dB gain, with pad
+8dBu at 0dB gain, no pad
-7dBu at +15dB gain, no pad
-22dBu at +30dB gain, no pad
-36dBu at +45dB gain, no pad
+48V, 10mA per input, software selectable
-113dBu
< 0.02% at any gain
Input signal 3dB below maximum
20Hz - 20kHz
Standard Ethernet
Single RJ-45
CAT-5
100Mbps
2 units when powered by 802.3af PoE
3 units when powered by external +12 V DC power supply (Sennheiser NT 12-50CS)
Class 0 802.3af PoE PD compliant +12VDC
2.7 W (225mA) at +12V DC, no phantom power
5.5W (460mA) at +12V DC, 10mA phantom power load per input
0 to 40 deg. C (32 to 104 deg. F)
P24
3.7mA
Mic In - XLR-3F
Mic Out - XLR-3M
XLR-3M out:
1 = Gnd
2 = Audio +
3 = Audio -
XLR-3F In:
1 = Gnd
2 = Audio +
3 = Audio -
Red/green
Toggle on / off
Push to mute
Push to talk
permanent on
Clip contact for logic
Trigger signal at the logic connector:
Logic in (external LED control)
GND
Logic out (switch signal)
-10 to 50 deg. C (14 to 122 deg. F)
Cardioid
50Hz - 20kHz
Gooseneck Microphone (condenser)
<100Ohms at 1kHz
15mV/Pa
130dB at 1kHz < 3 %
37dB (CCIR)
26dB (A)
12 - 48V
Phantom Power (P12 - P48)
3mA
XLR-3M
0 to 40 deg. C (32 to 104 deg. F)
-25 to 70 deg. C (-13 to 158 deg. F)
450mm (17.72")
Dante Interface: 219 x 38 x 120mm (8.62 x 1.50 x 4.72")
Table Stand: 120 x 170 x 43mm (4.72 x 6.69 x 1.69")
Dante Interface: 1.7 lbs (0.77kg)
Table Stand: 2.66 lbs (1.21kg)
Gooseneck Microphone: 147g (5.19 oz)
615104313361
The Dante-Kit MEG 14-40 includes the SL DI 4 XLR as well as four times the combination of the MAT 133-S table stand and the MEG 14-40 gooseneck with KE 10 microphone capsules. This Dante-Kit is designed especially for microphone installations in meetings- presentations and lectures. The MAT 133-S with the MEG 14-40 is as versatile as it is easy to operate. Experience clearly structured meetings and discussions as the intuitive handling will lead the focus on the content - not the technology. The proven Sennheiser KE 10 capsule provides best speech intelligibility.
Powered by the SL DI 4 XLR with just a standard XLR 3 cable, the microphone is integrated in a bigger setup with a finger snap and makes even spontaneous discussion setups possible. The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers. As analog to digital audio converter, it allows for adding analog microphone systems to a Dante system. All Sennheiser XLR microphones and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the SL DI 4 XLR.