
Review Summary
100 m (300 ft)
32.768 kHz
45 to 15,000 Hz (+/-2 dB)
<0.5%, typical
(Ref. +/-38 kHz deviation with 1 kHz tone)
G4 / 470 - 494MHz
>100 dB, A-weighted
-18deg.C (0deg.F) to +57deg.C (135deg.F)
TA3F
Impedance balanced
1=ground, 2=hot, 3=cold
-5 dBV (into 600 Ohms load) Ref. +/-38 kHz deviation with 1 kHz tone
200 Ohms
Molded polycarbonate case
-108 dBm for 12 dB SINAD, typical
2 AA batteries, 1.5V
Up to 12 hours (alkaline)
At -10 dB gain setting: +2 dBV / at 0 dB gain setting: -8 dBV
10 dB
10 to 30 mW (varies by region)
Molded PC/ABS handle and battery cup
2 AA batteries, 1.5V
Up to 12 hours (alkaline)
Dynamic
50 to 15,000 Hz
Cardioid
-54.5 dBV/Pa (1.85 mV)
1 Pa = 94 dB SPL
Rated impedance is 150Ohms (300Ohms actual) for connection to microphone
inputs rated low impedance
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
Three-pin professional audio connector (male XLR type)
FP5 Receiver (H x W x D): 108 mm x 64 mm x 19 mm/4.25 x 2.51 x 0.74"
FP2 Transmitter: 254 mm x 51mm (Dia) /10 x 2" (Dia)
SM58 Microphone (L x W): 162 mm x 51 mm/6.37 x 2"
FP5 Receiver: 81 g (3 oz.)
FP2 Transmitter: 290 g (10.2 oz.) without batteries
SM58 Microphone: 298 grams (10.5 oz)
042406232890
The Shure FP25/SM58-G4 FP Wireless Handheld System (G4 / 470 - 494MHz) features the FP5 portable diversity receiver and FP2 handheld transmitter with SM58 cardioid capsule. The FP5 receiver features diversity reception, easy one-touch channel search and lightweight plastic housing. Infrared sync provides quick and easy channel syncing between the FP5 receiver and FP2 transmitter. The FP2 handheld transmitter is lightweight and features the SM58 cardioid capsule. An input gain control is featured for flexible input level adjustment. The FP5 receiver and FP2 transmitter is ruggedly built and powered on a pair of AA batteries.