


See Options
Need help? Ask our experts.
The KSM141/SL Stereo Dual-Pattern Instrument Microphone offers a switchable omnidirectional and cardioid pattern. The omnidirectional pattern captures sound from all directions, while the cardioid pattern focuses on sound from the front, attenuating off-axis noise and ambiance.
The permanently biased transducer design in each microphone ensures clean, precise signal reproduction and consistent frequency response. This contributes to the overall audio quality, capturing sound as accurately as possible.
The transformerless Class-A output circuitry provides a noise-free output signal path while maintaining high gain levels. This ensures that the audio captured is clear and true to the original source.
The three-position low frequency roll-off switch is designed to eliminate low frequency rumble noise and counteract any proximity effect. This helps to further enhance the audio quality.
Yes, the KSM141/SL Stereo Dual-Pattern Instrument Microphone is capable of handling high sound pressure levels. It also features a three-position pad that provides attenuation at 0, 15, and 25 dB.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Permanently biased condenser
20Hz to 20kHz
Cardioid and omni-directional
150 Ohms (actual)
Attenuation: 0, 15, or 25dB
Low Frequency Response: Flat or -6db/octave below 115Hz
+48V phantom power
>50dB, 20Hz to 20kHz
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
-37dBV/Pa (typical, @ 1kHz; 1Pa = 94dB SPL)
Self Noise: 14dB (typical, equivalent SPL; A-weighted, IEC 651)
SNR: 80dB
5kOhms Load (Attenuator ON): 145 (160, 170)dB
2.5kOhms Load (Attenuator ON): 139 (154, 164)dB
1kOhm Load (Attenuator ON): 134 (149, 159)dB
5kOhms Load: 15dBV
2.5kOhms Load: 9dBV
1kOhms Load: 3dBV
5kOhms Load: 131dB
2.5kOhms Load: 125dB
1kOhms Load: 120dB
Balanced XLR
5.8" x 0.8" / 147.32 x 20.32 mm
5.5 oz / 155.92 g
042406199070



