58% Off

Slik Quick Release Plate with 1/4" Camera Screw for 700DX, Pro Ball Head 800 #618335/ 6124

SKU: SLQRP4 MFR: 618-335
$16.50
$39.00
Save: $22.5 (58%)
Earn VIP Reward Points

Key Features

  • Secure your camera with Slik's quick release plate for swift transitions.
  • Durable metal build ensures your camera stays locked and steady on any tripod.
  • Lightweight design makes this quick release plate easy to carry on any shoot.
  • Universally compatible with Slik 700DX & Pro Ball Head 800 tripod models.
  • Effortlessly attach and detach your camera with the user-friendly design.
  • Achieve precise alignment for perfectly framed shots using this Slik plate.
See More Product Details
Calculate Shipping

See Options

1

Need help? Ask our experts.

Overview
Compare
Q&A

Questions & Answers

Shopper : Is this sold in stores?RONALD E : I suspect you could find this in other stores. However, at one time I thought this model was out of stock, so I purchased one here when I found out it was available.
Shopper : Is this 3/8" female on the bottom?RONALD E : OK. Let me add. The bottom has a plastic cover over the center. When the plastic cover ~7/8 inches in diameter is revealed, there is simply the bottom of the female post that sits flush with the top of the cavity the plastic cover hides.RONALD E : Hi. I am not sure of the question. The female 'screw' portion is on the top and using a drill gauge plastic chart, the female screw fits 1/4 inch. Certainly 3/8 inch is way to large. The diameter of the item is 2 and 3/16 inches. The thickness is about 5/8. Hope that helps?JOHN S : as far as I know this has no threads on the bottom. It has a cover on the bottom and I am not going to rip it off. I keep my 3/8 to 1/4 in my tripod bag.GERALD B : It does not have a female 3/8" thread on the bottom. Just the 1/4 inch threaded post.MIDWEST CAMERA REPAIR, I : No, nothing on the bottom side, just the 1/4 20 you see on the top.MARKAM A : I do not believe so. I believe it has a solid screw base on the bottom. (I do not have it with me at present, but can check when I do)
Shopper : Will this adapter allow me to use the Slik 800 Ball Head on my Slik Pro 700 DX tripod ?MARCUS M : No, this is simply a camera/pod mating device (handy as, though, I love my two). I'm not sure if the Slik 800 head is compatible with the legs for the 700DX. Personally, I like the pan & tilt head I have. These plates are awesome for either, I'm sure. I have one on my camera body and one on my 650-1300mm zoom (all 7 pounds of it) and I get steady, positive lock and support. Best of luck and happy shooting.JAMES T : This is fast , easy, and that remains on my camera at all times.ROBERT A : Yes it wil, bought two have one on camera and other on 70-200 L 2.8 Lens. Works great on both.STEVE B : Yes this will work .its an excellent item. I use mine every day.DEVON H : This quick-release plate goes between your camera and the ball head. It's designed so that you can remove your camera from the tripod without having to unscrew the plate from your camera. The ball head should attach to the 700DX tripod without needing any adapters.JAY T : The 800 ball head should directly attach to the 700 tripod. This is the plate that attaches to the bottom of the camera. One of these is included with the Slik ball head and buying a second adapter plate would allow you to quickly change to a second camera on the ball head.

Reviews about this item

Review Summary

2020-10-09T19:14:36

Rated 5 out of 5

It works, and I like that.

Weird shaped tripod head, but it's fast and easy to use. Always nice to have a backup, especially when you're constantly misplacing things like I do. No complaints.

CHRIS L.

2020-09-18T08:32:32

Rated 5 out of 5

Replacement Part

Product as described - Good!

JOHN S.

2020-07-14T09:24:34

Rated 5 out of 5

Happy. Customer

Its perfect! I'm going to order more stuff. Thanks. Frank Clark

frank c.

2018-06-29T08:49:00

Rated 5 out of 5

Better than Original

We have 2 Alpen scopes on SILK tripods and 1 scope hit the ground because the original quick release plate screw was no longer able to screw to the scope. I purchased 2 of these replacement plates and the screws are removable unlike the original. We replaced with longer screws and now our scopes are securely fastened to the tripods. Well worth the cost. Just wish the original plates had longer screws to start with.

Lois P.

2017-07-14T12:42:40

Rated 5 out of 5

Satisfied Customer

Love having the extra mounting plate. By having the extra plate I do not have to move it every time I change cameras or lenses.

Larry T.

2017-01-25T14:59:28

Rated 5 out of 5

Release plate

Having a second plate is very handy. This setup works very well. Can take camera off the tripod very quickly to catch shots handheld if need be

LARRY D.

2013-09-30T21:00:00

Rated 5 out of 5

strong support

close fit, strong support, solid product

MARKAM A.

2010-04-10T21:00:00

Rated 5 out of 5

Perfect

This is identical to the one that came with my Slik Tripod, and works perfectly.

DCBill

2009-04-07T21:00:00

Rated 5 out of 5

Same as Release Plate that Comes with 70

Exactly the same as the quick release plate that comes with the 700 DX allowing use of the tripod with two cameras without changing the mounting plate.

ALAN W.

2009-01-20T19:00:00

Rated 4 out of 5

Nice accessory

This release plate is for my three-way pan head, not a professional ball head as the header suggests. The tripod comes with one disk and this is an extra so i can mount it on a backup camera or telephoto lens to allow me to change cameras quickly. It works quite nicely as such.Knowing what i know now though, I would skip purchasing this item an purchase the tripod legs only. Then, I would get a quality ball head for the legs.However, if you are not inclined to plunk down $400 for a nice ball head, this setup works just fine.

Amaroy

2008-09-03T21:00:00

Rated 3 out of 5

Great value

Holds great,so much so its hard for me to lift an 11 1/2lb. lens off of the tripod.

lp.love w.

2008-08-23T21:00:00

Rated 5 out of 5

Love this...

Easily supports the heavy camera and lens (D80 with 18-200 lens) fits in my pack so no need to always remove. Unobtrusive when using the camera without the Tripod.

Christopher R.

2008-06-11T21:00:00

Rated 5 out of 5

Quick and Slik!

Have one of these releases on all of my equipment, it's the best I have ever used.

Dennis C.

2008-05-29T21:00:00

Rated 4 out of 5

Neat and simple

Have ben doing some macro photography of flowers here in the AZ desert. Have a quick release plate on each of my cameras, very easy to switch from one camera to the other without having to figure out the right direction to mount the quick release and camera on the tripod.

Geo C.

About Slik Quick Release Plate w/1/4" Camera Screw #618335/ 6124

FEATURED REVIEWS

Better than Original

By Lois P.

We have 2 Alpen scopes on SILK tripods and 1 scope hit the ground because the original quick release plate screw was no longer able to screw to the scope. I purchased 2 of these replacement plates and the screws are removable unlike the original. We replaced with longer screws and now our scopes are securely fastened to the tripods. Well worth the cost. Just wish the original plates had longer screws to start with.

Perfect

By DCBill

This is identical to the one that came with my Slik Tripod, and works perfectly.

It's the Slik Quick Release Plate, a durable and sturdy accessory designed for cameras with a 1/4" camera screw, such as the Canon EOS 700DX. This high-quality product, identified by its unique product numbers #618335/ 6124, is a reliable choice for both professional photographers and hobbyists alike. Crafted by Slik, a brand renowned for its superior camera gear, this quick release plate is a testament to their commitment to quality and innovation.

The Slik Quick Release Plate is not just robust but also versatile, designed to attach seamlessly to a tripod or other support systems. This allows for secure and precise positioning of your camera, enhancing the stability and quality of your shots. What sets this product apart is its proprietary quick release mechanism. This feature enables swift and effortless attachment and detachment of your camera from the plate, adding a layer of convenience to your photography sessions.

Whether you're capturing stunning landscapes, engaging portraits, or dynamic action shots, the Slik Quick Release Plate with a 1/4" Camera Screw for 700DX, Pro Ball Head 800 #618335/ 6124 is an indispensable tool in your photography kit. Its reliable performance and user-friendly design make it a preferred choice among photography enthusiasts.

Slik Quick Release Plate w/1/4" Camera Screw #618335/ 6124 Features

  • Durable and sturdy Slik Quick Release Plate for cameras with a 1/4" screw
  • Designed for seamless attachment to tripods and other support systems
  • Features a proprietary quick release mechanism for easy camera attachment and detachment
  • Ideal for use with the Canon EOS 700DX and Pro Ball Head 800
  • High-quality product from a reputable brand, enhancing stability and shot quality
  • Versatile tool for professional photographers & hobbyists, perfect for various photography styles

Key Features

  • Secure your camera with Slik's quick release plate for swift transitions.
  • Durable metal build ensures your camera stays locked and steady on any tripod.
  • Lightweight design makes this quick release plate easy to carry on any shoot.
  • Universally compatible with Slik 700DX & Pro Ball Head 800 tripod models.
  • Effortlessly attach and detach your camera with the user-friendly design.
  • Achieve precise alignment for perfectly framed shots using this Slik plate.