Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
- Light Stand Adapter (1/4"-20")
- USB 2.0 Cable (A-Male to Mini-B)
- PSU 2-Pin Connector to 18W AC Adapter 6' Cable
- HDMI 18" Cable (Type A to Type A)
- SDI (BNC to BNC) 10" Cable
IPS Touchscreen
5"
1280x720
294
16:9
5
800 nits
70% NTSC
10-bit processing
160 Degrees
White LED
Yes
No
Not Supported
Not Supported
Not Supported
Supports UHD-1 4K at 30/29.97 at RGB 444 8bit, YCC 444 8bit, YCC 422 12 bit & 24/23.98 at RGB 444 10/8 bit, YCC 444 10/8bit, YCC 422 12 bit, YCC 4:2:2, 8/10/12 bit color in RGB & YCC 4:4:4, 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p/100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p59.94, 480p60
480p100, 480p119.88, 480p120, 480p239.76, 480p240, 576p50, 576p100, 576p200, 480i59.94, 480i60, 480i119.88, 480i120, 480i239.76, 480i240, 576i50, 576i100, 576i200
Not Supported
Not Supported
HDMI
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Stereo Out (headphones)
1x Micro-HDMI Input
1/8"Stereo mini-jack
1x Sony L-Style Battery slot
Barrel (3.5mm outer, 1.1mm inner) barrel output for powering cameras via camera specific adaptor.
1x Micro-USB for future use
Capacitive Touchscreen
Capture Tool
SD Card for Image Capture / Overlay, LUT Loading, Firmware Upgrades
Compatible with SmallHD BTR1 Wireless Remote
1x Sony L-Style Battery slot, 1x barrel connector for powering camera
6.0 - 8.4V
11.2W
Battery Only Device
Yes
Li-ion
Mirrors Input Voltage from battery
2000-6300mAh
Monitor does not support the charging of batteries
FCC, IC, CE
32 to 113 deg. F (0 to 45 deg. C)
Yes
3x 1/4-20 thread points (top, bottom, & right side)
2x & 4x with smooth pan via pinch zoom gesture
Preset Aspect Ratios & Customizable
Canon 5DMkii & Canon 7D
Underscan Only
1.33x, 1.5x, 1.66x, 2.0x
Automatic or Manual Control
Automatic or Manual Control
User Adjustable Color Style and Intensity
User Adjustable Intensity
Spectrum, Arri Style and Fully User Customizable
Dual - User Configurable
Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Yes
No
Fully User Customizable
Luma & RGB Style
No
With Dedicated Button and Image Gallery
Loadable as Looks on Pages or as Systemwide Color Calibration via the settings menu
No
Applied on Output Preview Page
Via SD Card or USB Storage Device
Opacity Slider and Blink Setting
No
Up to 8 channel
1x SD/HD/3G-SDI (75Ohsm BNC)
1x HDMI Type-A receptacle
1x USB 3.0 micro B receptacle
Supports metadata, timecode and start/stop flags from certain camera manufacturers
SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
<0.001sec (without format conversion)
1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Visually lossless
Yes
CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
48kHz 24-bit PCM
Embedded Audio Input
No
OLED Screen with Menu Joystick Navigation
On/Off and Reset Switch
Feature-rich Bolt Manager Application for OSX & Windows
Upgrade via Mini-USB
Non-DFS Frequencies:
US: 5.19 - 5.23GHz and 5.755 - 5.795GHz
EU & JP: 5.19-5.23GHz
DFS Frequencies:
US: 5.27 - 5.55GHz and 5.67GHz
EU & JP: 5.27 - 5.67GHz
Auto only (NOT configurable)
AES-128
15dbm EIRP
Up to 500' (152.40m) line of sight
Unicast / Multicast
Can coexist with Wi-Fi and 5GHz cordless phones
2-Pin Connector 7-28 VDC
No
9Watts (Measured at 1080p60)
0 to 40 deg. C (32 to 104 deg. F)
Milled Aluminum (Chassis) and regulation-compliant PCB
Plastic Cap
Multiple mounting options with M3 and 1/4" holes
Monitor (HxWxD): 3.98 x 1.28 x 5.25" (10.11 x 3.25 x 13.34cm)
Receiver: 6 x 3.4 x 1" (15.24 x 8.64 x 2.54cm)
Monitor without Battery: 12.3 oz (348.70g)
Receiver: 10.5 oz (297.67g)
- - FOCUS monitor - -
Professional grade camera-top monitor that can power your DSLR or mirrorless camera.
Daylight Viewable 5-inch Touchscreen
The FOCUS is the camera-top monitor many shooters have been waiting for. With a light and compact form factor, the FOCUS is bright enough to see and sharp enough to pull focus.
800 nits bright
5-inch, 1280x720 IPS LCD
More pixels per inch than retina displays
Big Production Value for Small Camera Setups
The FOCUS is an ideal camera-top monitor for DSLR and mirrorless camera shooters because the Sony L Series battery powering the monitor, can also power the camera. With a battery adapter cable, the FOCUS extends camera run-time as much as 4x, while providing a more useable display.
Auxiliary power out to DSLR and mirrorless cameras
Micro HDMI input with port protection
1/8 stereo headphone jack
6 watt power draw
Convenient Mounting
Every FOCUS monitor will ship with a cold shoe mounted Tilt Arm. Shooters will have a secure way to position their monitor while maintaining a low profile.
Allows the FOCUS to tilt 180 degrees for viewing convenience
Secure and lightweight mounting via shoe adapter or 1/4" 20
Includes a shoe mount of its own for accessories like microphones
Ships with every FOCUS monitor
Access to Professional Features
Waveform, False Color, Focus Assist, 3D LUTs and Pixel Zoom are just a few professional software tools at your fingertips with the SmallHD FOCUS. Thanks to an intuitive user interface we're calling Swipe OS, interacting and managing these powerful tools has never been easier.
- - Bolt 500 Wireless Receiver - -
The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. A key feature of the Bolt XT is its backward compatibility with any Bolt of the same range, Sidekick II / LT / XT and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.
Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4"-20 and 3/8" mounting points and an ARRI rosette on the transmitter to greatly improve available mounting options.
An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.
The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine and a 5GHz spectrum analyzer to keep an eye on interference in your area.
Join VIP PRO
Earn 2X Points + Exclusive Perks!
Request a Callback
Chat one-on-one with an expert
Sell or Trade your Gear
Get started in 3 easy steps