
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
2x stereo analogue (XLR balanced,
XLR balanced or RCA phono unbal)
4x stereo XLR balanced AES/EBU digital
stereo RCA phono S/PDIF digital
stereo optical TOSLink digital
+18dBu (analogue)/0dBFS (digital)
>60dB typical
XLR:>20kOhms balanced bridging
RCA:>10Ohms unbalanced
110 Ohms +/-20% AES/EBU balanced I/O
75 Ohms +/-5% S/PDIF unbalanced I/O
75 Ohms +/-5% TOSlink unbalanced I/O
32 to 192kHz, converted internally to 48kHz
+10dB on unbalanced input
Front panel push button with indicator LEDs
stereo analogue
Unity or - 10dB (switchable)
+18dB
<50 Ohms
<0.02% (1kHz, +8dBu output)
-95dB RMS, unity gain ref +8dBu output
20Hz-20kHz +0/-0.5dB
Analogue I/O, ref 0dBu
1kHz input: <-90dB
10kHz input: <-85dB
Three-way with stereo mid/ high-frequency drivers and mono low-frequency driver
2x 7W (HF) + 15W (LF) with protective limiter
250Hz (24dB/octave, Linkwitz-Riley)
HF Outputs: < 0.1% (1kHz, 3W output)
LF Output: < 0.01% (100Hz, 6W output)
More than 102dB below full output
Mute to full volume via front panel rotary control
+/-6dB via front panel rotary control
Peak: 98dB SPL at 2'
2x 8-segment LED bargraphs
0dB on scale can be set to 0dB or -10dB via rear panel DIP switch
Single LED indication showing average
4x XLR 3-pin female analogue
2x RCA phono analogue
4x XLR 3-pin female AES/EBU digital
RCA phono female S/PDIF digital
optical TOSLink digital
2x XLR 3-pin male (balanced, may be unbalanced)
1/4" (6.35mm) A-gauge 3-pole stereo jack socket
Filtered 3-pin IEC male, continuously rated 85 - 264VAC, 47 - 63Hz, fused, 60W peak, 30W average
Anti-surge fuse 2A 20x 5mm
1U
19 x 12 x 1.73" (48.26 x 30.48 x 4.39cm)
4.5 kg (9.92 lbs)
The Sonifex RM-CAD8 Confidence Monitor using the same outstanding speaker system as the Reference Monitor range, the confidence monitors offer a superb sound with a cut-down feature set. It has all the features of the RM-CA2 together with the ability to select from an additional 6 stereo digital inputs. As well as the 2 stereo analogue inputs there are also: 4 x stereo AES/EBU balanced inputs on XLR 3 pin female, 1 x stereo S/PDIF unbalanced input on RCA phono female, 1 x stereo TOSlink unbalanced input on an optical connector. The source select button illuminates to indicate synchronization lock to the incoming digital source.
Sample rate converters on the digital inputs allow sources of different sample rates to be connected and monitored, between 32kHz and 96kHz. It is a 1U rack-mount unit offering quality loudspeaker monitoring and 2 channel metering of two stereo analogue audio sources. Input 1 has stereo balanced Neutrik XLRs and Input 2 has both stereo balanced Neutrik XLRs and stereo unbalanced RCA phono connectors. Sources are selected via a front panel push-button switch, with clear LED indication of the current source.
A rear panel DIP switch setting allows the unit to monitor either: Stereo signals, with the two front panel control knobs acting as stereo volume and balance control, to alter the stereo imaging of the left and right channels or Dual mono signals, with the two front panel control knobs acting as left and right volume controls.
The three-way loudspeaker system is fed via a DSP-based active crossover and a trio of highly efficient Class-D amplifiers. Careful attention to driver selection, materials and case design, plus active DSP equalization, has ensured a flat response and outstanding reproduction from such a shallow unit. A protective limiter prevents damage to the loudspeakers under overload conditions. It operates from global mains voltages (85-264V AC, 47-63Hz) without adjustment.