Haida M10 Filter Bag for 100x100mm & 100x150mm Filters

2019-07-24T16:06:32

I purchased this along with the Haida M10 filter holder. My goal was to make it posible to change filters and incorporate the CPL without vignette and to avoid the hassle of screwing on unscrewing round filters. For this the combination works as expected. The specs are listed so this is about build and use. This is really good quality materials and construction. The inner bag's internals are made of plush and soft fleece lining. The bottom of the bellows pockets have material to keep the filters raised above the bottom of the bag. There is a velcro strip along the bottom to hold it in the outer bag. The front pocket can hold small items like cleaning cloth, extra filter holder rails and perhaps some smal flat items. The outer bag is calendared ripstop cordura in the top and on the front pocket with regular cordura on the sides and back. The internals are a smooth nylon with binding on all seams. The zippers work smoothly and have hold open pulls for use with gloved hands. There is a belt loop that runs across the back with velcro and reenforced stiffening to help it stay in place. There is also a webbing strap on the upper back which serves to hold the bag on the tripod and convienient for changing filters. The front pocket has padding between it and the main bag so it protects the filters in the main bag from hard objects like mounting rings, step up rings, a percision screw driver or filter wrench and other items. The whole thing is kinda big, and unless you have 5 or 6 4x4 or 4x6 filters with a holder and all the stuff that goes with it then look elsewhere. I found that having this took all of my stuff and put it in one pouch, convienient when needed and easy to put back in my bag when done. I have never owned a ThinkTank filter hive, but this looks like a copy. If so, then this is much cheaper that the ThinkTank and works for my purposes.

James O.