SmallRig Accessory Kit for Blackmagic URSA Mini/URSA Mini Pro

SmallRig Accessory Kit for Blackmagic Ursa Mini/Ursa Mini Pro 1902 is specially designed for Blackmagic URSA Mini Camera/URSA MINI PRO. Composed of a top plate, a baseplate, a side plate and a top handle. Thus, the fast switching between handhold, shoulder mount and tripod turns easier.

This kit features a NATO rail on the top plate, allowing to mount NATO handle 1649 for handheld shooting. Equipped with shoe mounts on both top plate and side plate, this allowing to mount wireless receiver, microphone and monitor, etc.

The side plate is perfectly matched to your camera. With an ARRI rosette designed, ARRI style extension arm can be used for enjoyable shoulder shooting. Meanwhile, it comes with many 1/4 & 3/8 mounting points for additional accessories attachment. Besides, in easy way you can attach different quick release plates to the bottom when using the tripod.

- Top Plate -
SmallRig Top Plate for Blackmagic Ursa Mini/Ursa Mini Pro 1853 is exclusively designed for Blackmagic URSA Mini/URSA Mini PRO camera. The NATO rail on the top could attach SmallRig Quick Release Cheese Handle 1649 and SmallRig DSLR Action NATO Handle 1955. 1/4"-20 threaded holes could attach SmallRig Top Handle with Cold Shoe(Cheese) 1638 and SmallRig Camera/Camcorder Action Stabilizing Universal Handle 1984, or attach Cool RailBlock 15mm Rod Clamp 1078 for dual rods.

ARRI locating holes could attach SmallRig 15mm Clamp with ARRI Accessory Mount 3/8"-16 Hole 2001. 3/8-16 threaded holes could attach accessories with 3/8" threaded holes, such as magic arm. Cold shoes could mount microphone, SmallRig Articulating Rosette Arm(7") 1497 and SmallRig 1/4" Camera Hot shoe Mount with Additional 1/4" Screw 761. 1/4 threaded holes could attach camera via 1/4 screws. The design is also good for heat dissipation and weight loss. In addition, the lock mount could lock the handle firmly.

Features
• Fits the camera tight and block no microphone port
• Multi-functional Cold Shoe included
• ARRI Locating Holes included
• Compatible with Quick Release Cheese Handle 1649 and DSLR Action NATO Handle 1955

- Side Plate -
SmallRig Side Plate for Blackmagic URSA Mini/URSA MINI PRO 1854 is exclusively designed for Blackmagic Ursa Mini/Ursa Mini Pro camera. ARRI locating holes could attach SmallRig 15mm Clamp with ARRI Accessory Mount 3/8"-16 Hole 2001. NATO rail could mount SmallRig EVF Mount 1594, and 1/4-20 threaded holes could attach accessories with 1/4 screws, like magic arms. Cold shoe could attach wireless voice receiver with cold shoe mount and SmallRig Articulating Rosette Arm(7") 1497. M6 threaded holes are utilized to lock the camera tight with screws.

ARRI rosette could attach SmallRig ARRI Extension Arm 1807 and then SmallRig Right Side Wooden Handle 1941 for shoulder carrying. 4 Convexes fit the camera completely and reduce the pressure on the rosette, and 4 rubber cushions on them could prevent the cameras from scratches.

Features
• NATO Rail attaches SmallRig EVF Mount 1594
• Cold shoe for magic arm included
• ARRI rosette for original handle included
• 4 Rubber cushions prevent the camera from scratches

- Top Handle -
This cheese handle integrated maximum possible attachment points with its size and weight. Almost every part of the handle can be utilized while kept spacing in between, so when more accessories are attached to it, they won't interfere with each other.Place the handle on camera with its NATO rail, find a balanced handeld shooting position, then lock the handle with thumbscrew. You can find one rod hole in left-right direction in the joint, and another in front of the handle. Lock rods in these holes, then you can attach EVFs, microphones on rods.

There are 2 cold shoes in front and back side of handle, in horizontal and vertical directions respectively.The grip area is patterned with 1/4" and 3/8" threaded holes, and 2 ARRI mounting points.Imagine what you can do with one single small, light-weighted cheese handle!

Features
• NATO Clamp, Fast Lock and Release
• Adjustable in 2 Directions
• Rod Clamp, Rod Hole
• Two Cold Shoes
•1/4" and 3/8" Threaded Holes, 2 ARRI Mounting Points

- Baseplate -
This low profile base plate is a simple and light base plate for the current popular cameras, such as Sony FS7, Sony A7 series, Canon C100/C300/C500 etc. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.

It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig. With 1/4"-20 & 3/8"-16 threads on bottom, this base plate can be attached to any tripod.