SmallRig Top Handle Accessory Kit

SmallRig NATO Top Handle with Rod Clamp 2027 is equipped with an array of 1/4" and 3/8" threaded holes for DIY choices on top handle, and they could attach short magic arms for wireless video transmitter. The cold shoe on the top handle could attach microphone or attach Double BallHead 1135/1875 for wireless video transmitter for shooting and signal transmission. The holding parts could be adjusted via the screws by 90mm, so that the balance could be achieved and it is also convenient to attach other devices.

The NATO clamp could attach NATO rail 1409/1195, which consumes little time. 15mm single rod clamp could attach 15mm rod, to which you could attach Microphone Shock Mount 1802 or Mini Mounting Plate 1906 for monitor. The cold shoe could attach voice receiver. The Arri locating clamp could attach adapter and magic arms with Arri locating pins. It also comes with Hex spanner to adjust the positions of handle and detach other accessories quickly.

- NATO Handle -
SmallRig DSLR Action NATO Handle 1955 is a sliding top handle for moving shoots. It is designed for quick release attaching and detaching on the camera without screws. Simply slide onto Safety NATO Rail and tighten down the thumbscrew. Except for sliding it from left to right on the Rail to keep your camera balanced, you can also slide it forwards and backwards to find the balance point of your rigs.

The handle is equipped with two shoe mounts on the top and at the back respectively, to which the light accessories, such as microphone, magic arm, could be attached. This handle is equipped with the hole pattern for ARRI accessory mount pins, so you can attach ARRI compatible extension blocks. The grip provides 1/4" & 3/8" mounting points for additional accessories. Additionally, we specially offer a 1/4" spanner for free access. It is quite convenient when you need to improve the camera and rigs balance.

Features
• Sliding left and right on the Rail to keep your camera balance
• Slide forwards and backwards to find the balance point of your rigs
• Built-in Shoe mounts on the top and at the back
• 1/4"-20 & 3/8"-16 mounting points for additional accessories
• ARRI locating hole for attaching ARRI compatible extension blocks
• With a 1/4" spanner for quick use

- 15mm Rod Clamp -
SmallRig 15mm Rod Clamp 1995 is equipped with two counterbore holes and one 1/4" threaded hole. It could attach SmallRig handles 1955 via two M4 screws, and it could work with 15mm rod for Microphone Shock Mount 1802. In other scenario, it works with 15mm rod for Single RailBlock 860 or Mini Mounting Plate 1906 and then monitor. 1/4" threaded hole could be utilized for DIY choice, and it could attach 15mm Micro Rod 1653/1552 for monitor which could be rotated horizontally and is favorable for monitoring in different directions.

Features
• Equipped with two counterbore holes and one 1/4" threaded hole
• Attach handles 1955 via two M4 screws
• 1/4" threaded hole could be utilized for DIY choice
• Mount 15mm rod