SmallRig Cage Kit for Panasonic Lumix GH5/GH5S

SmallRig Cage kit is exclusively designed for Panasonic Lumix GH5/GH5S. It includes Cage 2049, Top Handle 1984 and QR Baseplate Kit 2035. It offers an abundance of possibilities for the cameraman as per the needs during shooting.

The cage benefits Panasonic GH5 camera in video production by strengthening protection and stability and providing more mounting options. It does not block any access to the SD card slot, battery compartment, and all camera controls. It is equipped with cold shoe, NATO rails, 1/4"-20 and 3/8"-16 threaded holes for DIY operations.

The top handle ergonomically designed features light weight and could be adjusted leftwards and rightwards for balance with ease, with two hex spanners ready for screws. QR Baseplate Kit enables 85mm rod height. It is compatible with Arri Dovetail QR plate. Threaded holes at the bottom are compatible with Manfrotto and Vinten QR Plates.

- Cage -
SmallRig Cage 2049 is designed specifically for Panasonic Lumix GH5/GH5S.

The GH5 cage benefits your Panasonic GH5 camera in video production by strengthening protection and stability and providing more mounting options. The cage fits the camera perfectly, and it does not block any access to the SD card slot, battery compartment, and all camera controls. It is equipped with an array of 1/4" threaded holes on the top for Top Handle 1984/1638.

The integrated cold shoe on the top could attach microphone or accessories with cold shoe adapter. It features NATO rails on both sides for NATO handles to extend more mounting possibilities. Cold Shoe 1241 could be mounted on the cage via 1/4" and M2.5 threaded holes for microphone, LED lights and so on. NATO rails on the sides of cage could attach NATO Clamp to Arri Rosette 2046 and then Wooden Handgrip 1941 for quick release. HDMI Lock 1822 could be mounted on the side via 1/4" threaded hole for the protection of HDMI cable.

At the bottom are an abundance of 1/4" and 3/8" threaded holes for Manfrotto and Vinten QR plates or Quick Release Baseplate Kit 2035. Lens Adapter Support 2016 could be mounted at the bottom of cage to support Metabones lens adapter. Additionally, on the right side of cage is an eyelet for wrist strap for your convenience. The cage is good for thermal dissipation of camera and prevents it from twisting. Apart from that, it could attach Panasonic Lumix GH5 DMW-XLR1 Helmet Kit 2017 on the top for handheld shooting and protection of XLR.

Features
• It does not block any access to the SD card slot, battery compartment, and all camera controls
• At the bottom are an abundance of multiple 1/4" and 3/8" threaded holes for Manfrotto and Vinten QR plates or Quick Release Baseplate Kit 2035
• The cage is good for thermal dissipation of camera and prevents it from twisting
• It could attach Panasonic Lumix GH5/GH5S DMW-XLR1 Helmet Kit 2017 on the top for handheld shooting and protection of XLR

- Top Handle -
SmallRig Camera/Camcorder Action Stabilizing Universal Handle 1984 is a universal top mounting handle for moving shoots. It bolts on to two 1/4"-20 holes spaced 36mm apart center for secure camera carrying. Two shoe mounts are found on the top and at the back for attaching on cameras lights and microphones. Accessories can be attached using the multiple 1/4"-20 and 3/8"-16 holes in standard spacing and two Arri standard accessory mount. Additionally, we specially offer a 1/4" spanner for free access. It is quite convenient when you need to adjust the handle forwards and backwards for camera and rigs balance.

Camera/Camcorder Action Stabilizing Universal Handle
Screw-mounted top handle for moving shoots. Bolts onto two 1/4" holes for secure camera carrying.

Snap On & Off Easily
The spanner-placed groove is magnetic, just put it in place and you're good to go Never worry about it dropping

Features
• Slide forwards and backwards to find the balance point of your rigs
• Built-in Shoe mounts on the top and at the back
• 1/4"-20 & 3/8"-16 mounting points for additional accessories
• Arri locating holes for attaching Arri compatible extension blocks
• With a 1/4" spanner for quick use

- QR Baseplate Kit -
SmallRig Quick Release Baseplate Kit 2035 is exclusively designed for GH5/GH5S Cage 2049. It offers possibilities to extend the mountings as per your needs during shooting. It also enables to switch different shooting modes, like handheld shooting and tripod shooting, run-and-gun and tripod shooting in different scenarios. It features great convenience for the cameraman.

SmallRig Quick Release Baseplate Kit 2035 could attach GH5/GH5S Cage 2049 without blocking the screws to mount the camera on the cage. It is very convenient for the quick release of cage. Quick release baseplate is locked tight with quick release plate via a wingnut, so that you can detach and attach them with great ease. Dual rod clamp enables 85mm rod height to mount matte box, follow focus and lens adapter etc.

Lens adapter bolt is utilized to secure M43Metabones lens adapter, protecting the camera bayonet and preventing the loss of signals while shooting. Threaded holes at the bottom are compatible with Quick Dovetail(Manfrotto) 1647 and Vinten Camera Quick Release Plate 1700. It could be mounted on Arri Standard Dovetail(12") 1463 and then sits on tripod for balance.

Features
• It is exclusively designed for GH5/GH5S Cage 2049, and the dual rod clamp enables 85mm rod height to mount matte box and follow focus
• The Arca baseplate is locked tight via a locking lever, thus it is very convenient to attach and detach the cage with camera mounted. Handheld shooting mode and tripod shooting mode could be switched quickly
• It is compatible with M43 Metabones lens adapter, protecting the camera bayonet and preventing the accidental loss of signals while shooting
• Arri dovetail groove at the bottom is compatible with Arri Standard Dovetail(12") 1463
• Threaded holes at the bottom are compatible with Quick Dovetail(Manfrotto) 1647 and Vinten Camera Quick Release Plate 1700