SmallRig Professional Accessory Kit for Canon C200 and C200B

SmallRig Professional Accessory Kit 2126 is exclusively designed for Canon C200 and C200B. It could offer lots of additional attachment options and enables the camera to release its potential to the utmost.

SmallRig Professional accessory Kit 2126 is exclusively designed for Canon C200 and C200B. It supports run-and-gun, handheld shooting, and it could be mounted with dual 15mm rods and enables EVF bracket adjustment. It allows quick switch to tripod shooting, run-and-gun shooting and handheld shooting to cater for the needs of cameramen.

- Baseplate -
SmallRig Baseplate 2076 is exclusively designed for Canon C200 and C200B. It includes an Arca QR plate on the top and a baseplate(with ARRI dovetail groove) at the bottom. It could offer lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of cameraman during shooting.

Arca QR plate on the top attaches the bottom of camera via 4 screws for firm attachment. It is equipped with 1/4"-20 and 3/8"-16 threaded holes for QR plates at the bottom. It could be detached from the baseplate for QR plates of other standards, thus it could be switched to other modes, such as in dollies and cranes.

The baseplate is anti-off designed, thus it prevents the camera from accidental removal. It comes with dual rod clamps for 15mm rods whereby lens support, follow focus, matte box etc. could be attached. Arri dovetail groove at the bottom could attach Arri QR plate and then sit on the tripod. It is also equipped with 1/4"-20 and 3/8"-16 threaded holes at the bottom for DIY operations.

Features
• It is exclusively designed for Canon C200 and C200B
• Arca QR plate could be mounted on the baseplate in drop-in style
• It comes with dual rod clamps for 15mm rods whereby lens support, follow focus, matte box etc. could be attached. 85mm rod height is ensured
• The baseplate that comes with Arri dovetail groove at the bottom fits Arri QR plate for tripod; it is also equipped with 1/4"-20 and 3/8"-16 threaded holes for QR plates of other standards
• The pressing part will not drop accidentally even the wingnut looses

- Top Plate -
SmallRig Top Plate 2056 is specifically designed for Canon C200 Camera. It could provide more mounting possibilities based on your needs during shooting. It features in gear racks to mount accessories with gear racks with anti-twist purpose.

SmallRig Top Plate for Canon C200 Camera 2056 could be applied in many shooting scenarios with the gear racks on the top and at the side. It could be mounted on the top of camera via two 1/4" counterbores.

It could attach original top handle of Canon C200 camera with 1/4" threaded holes and gear racks placed in the center of top. Accessories with gear racks with anti-twist purpose, like EVF Bracket for Canon C200 Camera 2064 could be mounted on the front side, while on the right side are two M4 threaded holes to attach the original microphone bracket of Canon C200. Arri locating points on the top could attach Anti-rotation Magic Arm Adapter 1978 for magic arm and then monitor. In addition, it is equipped with 1/4"-20 and 3/8"-16 threaded holes for DIY operation as per your needs in different scenarios.

Features
• It is a top plate exclusively designed for Canon C200 Camera
• It could attach original top handle of Canon C200 camera with 1/4" threaded holes and gear racks placed in the center of top
• EVF Bracket for Canon C200 Camera 2064 could be mounted on the front side
• Two M4 threaded holes on the right side are utilized to attach the original microphone bracket of Canon C200
• It comes with 1/4"-20 and 3/8"-16 threaded holes on the top for DIY operation

- EVF Bracket -
SmallRig EVF Bracket 2064 is exclusively designed for Canon C200 Camera. It is compatible with original top handle of Canon C200, original EVF support of Canon C200 and Top Plate for Canon C200 Camera 2056. It enables to expand an abundance of possibilities and release the maximum potential of camera during shooting in different scenarios.

SmallRig EVF Support 2064 is made up of a rod, a rod clamp, a rod to NATO rail and a NATO clamp. It features the 15mm rod that enables enough possibilities for adjustment and blocks no access to operations. Both the rod clamp and NATO clamp are equipped with gear racks which are compatible with accessories with gear racks on the other end. Thus, the rod clamp could attach original top handle and Top Plate for Canon C200 Camera 2056 with the gear racks and a 1/4"-20 screw for anti-twist purpose and firm attachment; NATO clamp could be mounted with original EVF support of Canon C200 with the gear racks and a 1/4"-20 screw, while the monitor mounted on original EVF support of Canon C200 could be adjusted leftwards, rightwards, forwards and backwards because of the unique design of the device.

Features
• Comes with gear racks for anti-twist purpose and firm attachment
• Monitor mounted on original EVF support could be adjusted in all directions to fit different view distance
• Quick lock and foldable design. Minimized storage space required

- Sun Hood -
It protects Canon C200 monitor from direct sunlight while shooting outside. It could be mounted on the monitor with great ease with the help of magic fasteners. It folds flat for storage and transport. It weights only 38g.

Features
• It fits the monitor tight and blocks the sunlight while shooting outside
• It does not block any buttons and ports on the left side of monitor. Meanwhile, it supports touch-screen operation
• It features quick attachment and detachment and It folds flat for storage

- Shoulder Rig Handle Kit -
SmallRig Shoulder Rig Handle Kit 2002 attaches 15mm rods for shoulder mount shooting. The shoulder rig handle kit comes with independent anti-slip handles utilizing SmallRig rosettes. Each arm is equipped with an array of threaded holes. Put the handgrips in front of your body for better camera control. Threaded holes on arms are for attaching accessories. Four main pivoting points can rotate 360 Degree that are controlled separately by black tension levers. This offers you unlimited position options. The quick release clamp saves your time on operation when attaching rods, just by tightening the black lever on the bottom. It is ideal for quick, lightweight, shoulder-mounted configurations.

Features
• Attaches 15mm rods for shoulder-mounted shooting
• Rosette can rotate 360 Degree
• The diameter of the rosette is 31.8mm
• Black tension levers locking

- Universal Shoulder Pad with 15mm RailBlock -
SmallRig Shoulder Pad with 15mm RailBlock 2077 is exclusively designed for universal cameras, be it large or small. It is the perfect choice for DSLR, mirrorless cameras and small cameras. It includes Universal Shoulder Pad 2057 and 15mm RailBlock 942. It offers an abundance of possibilities for the cameraman as per the needs during shooting, thus it is very beneficial and convenient for the cameraman.

15mm RailBlock 942 could could be mounted on the top of Universal Shoulder Pad 2057 and then 15mm Rod 1053 for Multipurpose U-Base 1674 and Handle Grip 998 for run-and-gun(mainly for small camera), and during the process the balance could be adjusted for better operation.

Universal Shoulder Pad 2057 could be mounted in the front with 15mm RailBlock 942. Shoulder Pad 2057 could attach big camera on the top, thus balance of camera could be adjusted on the shoulder. Universal Shoulder Pad 2057 could be mounted at the rear with 15mm RailBlock 942 and then 15mm Rod 1053 for Battery Back 1547 and V-Lock Assembly Kit 1846 whereby big battery could be mounted. It is very convenient to adjust the balance during run-and-gun shooting.

In addition, it is equipped with an abundance of 1/4"-20, 3/8"-16 and M4 threaded holes together with Arri locating points for DIY operation.

Features
• It offers comfortable run-and-gun shooting experience for the cameraman
• It could be operated with SmallRig products for DIY options to meet the personalized needs with minimum weight and reasonable price
• It is flexible and compatible with both big and small cameras
• It features in light weight and weights only 302g

- 2pcs 15mm Black Aluminum Alloy Rod(M12-45cm) -
Includes 2pcs of 45cm long industry standard 15mm rod. There is an inner M12 thread on each end of the rod, so that you can extend the rod with a M12 threaded rod.