SmallRig Full Camera Cage Kit with Aluminum Universal Side Handle and HDMI Cable Clamp for Sony A7R IV

- Full Camera Cage -
SmallRig Cage for Sony A7R IV CCS2416 is a form-fitting full cage. The camera is fixed by a 1/4 screw on the bottom and a M2.5 screw on the side. It comes with multiple 1/4''-20 and 3/8''-16 threaded holes, ARRI locating holes, a built-in NATO rail and a cold shoe, allowing mount of different accessories.

For example you can mount SmallRig Top Handle 1984, SmallRig ARRI Locating Handle 2165 or SmallRig Wooden Side Handle 2187 for hand-held shooting, and attach SmallRig Cable Clamp 1679 to protect the HDMI cable. It comes with attachment points for hand straps and neck straps. An included flat screw driver at the bottom is designed to tighten or detach the camera. The cage maintains full access to camera's buttons, ports and battery.

Note: Please take off the camera's triangular strap ring on the right, before you tighten the side screw.

Features
• A form-fitting full cage specifically designed for Sony A7R IV
• Camera is firmly fixed to the cage by a 1/4 screw and a M2.5 screw
• Multiple 1/4''-20 & 3/8''-16 threaded holes and ARRI locating holes
• Bulit-in cold shoe mount and NATO rail
• Built-in screw driver on the bottom

- Aluminum Universal Side Handle -
SmallRig Aluminum Universal Side Handle HSS2425 is designed to provide a comfortable handheld shooting for cameramen. A built-in hex on the bottom can be used to adjust the handle up and down based on your needs. If you want to use the handle on the other side of the cage, use the hex to take off the connection metal part of handle and change the direction.

The handle can be mounted to the left or right side of camera cage with two 1/4"-20 screws. It comes with one cold shoe and three 1/4"-20 thread holes allow for mounting accessories. It weighs 220g only and features an aluminum body with anti-slip silicone gel coverings to provide a comfortable and lightweight handheld shooting. Also this handle can be used with a hand strap for more security.

Features
• Fits for left or right side of camera cage
• Built-in Allen wrench allows to change the direction of the handle and adjust the height
• Mounting holes & cold shoe on top of the handle for accessory attachment
• Aluminum body with anti-slip silicone gel coverings provide a comfortable and lightweight handheld shooting

- HDMI Cable Clamp -
SmallRig Sony A7II/A7RII/A7SII/ILCE-7M2/ILCE-7RM2/ILCE-7SM2 HDMI Lock 1679 is specially designed for Sony A7II half cage 1673 and Sony A7ii Cage 1660. Attached to the cage with two 1/4"-20 screws, it prevents HDMI cable from accidental dropping. Moreover, this HDMI lock is equipped with two M5 threaded holes to lock USB Cable with screws.