SmallRig Half Cage Kit for Sony Alpha 7S III

SmallRig Half Cage Kit for Sony Alpha 7S III 3237 includes SmallRig Half Cage 3193, HDMI Cable Clamp 3000 and ARRI Locating Top Handle 2165. The handle eases your arm's load in low-angle shooting and features accessory mounting points. The cage and the handle come with multiple 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, available for mounting SmallRig Side Handle 2093 and Monitor Mount 2903, and with cold shoe mounts for attaching microphones, LED lights and Monitor Mount 2905. The HDMI cable clamp secures to the side of the cage via a 1/4"-20 screw and two anti-twisting locating pins to protect HDMI port. Featuring Arca Swiss plate on the bottom of the cage fits DJI RS 2 and RSC 2 gimbal and Arca type tripod, allowing quick switch between gimbal and tripod shooting scenarios.

- Half Cage -
SmallRig Half Cage for Sony Alpha 7S III 3193 is designed to protect the camera and provide accessory mounting points. It locks the camera via 1/4"-20 screws on the bottom and prevents twisting with a raised front edge. Featuring rubber pads inside the cage offer full protection against scratching. Provides multiple 1/4"-20 threaded holes allow to mount a wide range of accessories such as Top-handle HTS2756 and Monitor Mount 2904. Its top features an ARRI 3/8"-16 locating hole for mounting Top Handle 2165 and Monitor Mount 2903.

Built-in cold shoe mount on the top supports microphone and LED light, you can also attach the Monitor Mount 2905. The bottom of the cage comes with a built-in Arca type plate for attaching directly to DJI RS 2 and RSC 2 gimbal and features 1/4"-20 threaded holes for mounting onto other quick release plates. A built-in flat-head screwdriver is store on the bottom for quick assembly. In addition, an optional HDMI Cable Clamp 3000 for Sony Alpha 7S III can be purchased to protect the HDMI port.

Note: No compatible HDMI cable clamp when mounted onto Sony Alpha 7 III, Alpha 7R III, and Alpha 7R IV camera.

Half Armor Full Featured
Half Cage for Sony Alpha 7S III

• Smaller and Lighter Half Cage
• Accessory Ecosystem
• Seamless Protection
• Easy Accessibility

Consummate Craftmanship
• Features a built-in Arca-swiss quick release plate on the bottom to work with DJI RS 2
• Comes with multiple 1/4 threaded holes to work with other types of quick release plate
• Gimbal
• 1/4 Threaded Holes
• Arca-swiss Quick Release Plate

Accessory Ecosystem
• Compatible with SmallRig accessory ecosystem, thousands of accessories to choose from
• Features multiple mounting points to attach external devices

Seamless Protection
• Built-in rubber pad to prevent scratch
• Anti-twist design with the locking screw

Easy Accessibility
Built-in Allen Wrench for quick assembly and disassembly

Features

• Designed for Sony Alpha 7S III
• Multiple 1/4"-20 & ARRI 3/8"-16 threaded holes and cold shoe accessory mounts
• Integrate Arca Swiss plate on the bottom compatible with DJI RS 2 & RSC 2 Gimbal and Arca tripod
• Built-in flat-head screwdriver for easy access
• Features all-around protective rubber pads

- HDMI Cable Clamp -
SmallRig HDMI Cable Clamp for A7S III Cage 3000 is compatible with SmallRig Cage 2999. Designed to prevent the camera's HDMI cable from accidentally disconnecting, this clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins. The easy-to-grasp Knurled 1/4"-20 screw adjusts a sliding block that can be tightened to accommodate HDMI cable of varying diameters. This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench.

Features

• For SmallRig A7S III Cage 2999
• Attaches to Cage with a 1/4"-20 Screw and Anti-twist Pins
• Secures HDMI Cable and Prevents Accidental Cable Disconnects
• Easy-to-Grasp Knurled 1/4"-20 Screw

- Arri Locating Top Handle -
SmallRig ARRI Locating Handle 2165 is designed to attach to camera or cage via standard ARRI 3/8"-16 screw and provide multiple accessory mounts. The handle secures via the thumbscrew and allows to use the built-in hex spanner for further security to ensure safety. Featuring multiple 1/4"-20, 3/8"-16 and ARRI 3/8"-16 threads for accessories such as Monitor Mount 2294 and 2348. Integrates with three cold shoe mounts, with one of which is designed with an anti-removal pin allows mounting mic and light. The handle also offers a 15mm rod clamp for rod compatible accessories.

Features

• Attaches to Select Cages/Supports via ARRI 3/8"-16 Screw
• 1/4"-20 & 3/8"-16 & ARRI 3/8"-16 Accessory Threads
• 15mm Rod Clamp
• Three Built-In Cold Shoe Mounts
• Built-In Hex Spanner for Further Secure