SmallRig Basic Kit for Sony Alpha 7 IV/Alpha 7S III 3668

SmallRig Basic Kit for Sony Alpha 7 IV/Alpha 7S III 3668 is designed to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. It includes a cage, an HDMI cable clamp, and a top handle. The top handle feels comfortable and enables easy carrying and at the low-angle shot. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails support monitor mount 2294, microphones, LED lights, monitor mount 2903, NATO accessories.

The HDMI cable clamp, mounted onto the left side of the cage via one 1/4"-20 screw and two locating pins, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stability signal transmission. In addition, holes on both sides of the cage allow attaching hand straps. The cage comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly.

Note: To use the side lock of the cage, please remove the split ring on the left side of the camera first.

- Full Cage -

SmallRig Full Cage for Sony Alpha 7 IV/Alpha 7S III/Alpha 1 3667 is designed to provide accessory mounts and protect the camera. Two locking side plates are included, together with one 1/4"-20 screw at the bottom, to lock the camera and prevent deflection. Built-in all-around protective spacers prevent the camera from being scratched.

The cage gives access to interfaces, dials, buttons, or battery doors. There is a spindle spanner at the battery compartment which fits the camera curve and leaves room for a little finger for comfortable grip. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, and cold shoes support top handle 2165, side handle 2093, monitor mount 2903, microphones, LED lights, monitors, etc. Arca's quick release plate at the bottom is compatible with DJI RS 2/RSC 2 and the quick release plate (pad) of DJI RS 2/RSC 2 stabilizers for stabilizer shooting.

Optional HDMI Cable Clamp 3000 works with Alpha 7 IV/Alpha 7S III to protect interfaces and ensure stable signal transmission during filming. Holes on the sides and bottom of the cage allow attaching such accessories as hand strap PAC2456 and shoulder strap PSC2428. Besides, the cage comes with a built-in magnetic spanner that facilitates disassembly and assembly.

Accessory Ecosystem for Sony Alpha 7 IV
Enhance the Groundbreaking Performance

Precise Holes & Accurate Calibration
Full access to all controls and buttons of the Sony Alpha 7 IV

• Reserved space for wired battery cable
• An hinge arm designed for quick battery swaps

Accessorize Your Cage with Multi-mounting Options
Including 1/4"-20 threaded holes ARRI 3/8" -16 locating holes, cold shoe, and NATO rail to be compatible with all SmallRig accessory ecosystems

• 1/4'-20 threaded holes
• ARRI 3/8'-16 locating holes
• Cold shoe
• NATO rail
• Arca quick release plate

Note: Arca quick release plate on the bottom for quick switch between tripod, stabilizer and handheld shooting

All-round Protection
• Adopted aviation aluminum and formfitting design for security and durability
• Built-in all-round protective pads prevent the camera from being scratched
• Anti-twist design at the bottom and sides

Wide Range Compatibility with Modular Design
The interchangeable side locking adapter makes the cage work with the Sony Alpha7S Ill camera and Sony Alphal camera

Note: Two locking side adapters are included. The shoulder strap hook can not work with the side locking adapter at the same time.

Features
• One-piece full cage protects the camera
• Spindle spanner at the battery door fits camera curve and enhances grip experience
• Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails support handles, microphones, LED lights, monitors, etc
• Two-point locking: fixes camera via one 1/4"-20 screw at the bottom and the shoulder strap hole on the left side (with 2 sliders, suitable for different models)
• Arca quick release plate on the bottom for quick switching between tripod, stabilizer (DJI RS 2/RSC 2), and handheld shooting

- HDMI Cable Clamp -

SmallRig HDMI Cable Clamp for A7S III Cage 2981 is compatible with SmallRig Cage 2982. Designed to prevent the camera's HDMI cable from accidentally disconnecting, this clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins. The easy-to-grasp Knurled 1/4"-20 screw adjusts a sliding block that can be tightened to accommodate HDMI cable of varying diameters. This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench.

Features
• For SmallRig A7S III Cage 2999
• Attaches to Cage with a 1/4"-20 Screw and Anti-twist Pins
• Secures HDMI Cable and Prevents Accidental Cable Disconnects
• Easy-to-Grasp Knurled 1/4"-20 Screw

- Universal ARRI Locating Handle -

SmallRig Universal ARRI Locating Handle 2165C is an all-in-one and half handle, with a simple and ergonomically designed to offer a comfortable handheld shooting experience. ARRI-type mounts allow for quick assembly and disassembly; locating pins enable horizontal and vertical attachment while securing the camera. Featuring an all-in-one and half structure, it comes with multiple 1/4"-20 & 3/8"-16 & ARRI 3/8"-16 accessory threads and three cold shoe mounts for monitors, LED lights, or microphones, and a built-in spanner for easy access. The cold shoe mount on the front end of the handle is designed to prevent accidental disconnection. Overall, the lightweight and practical handle can provide a wide range of mounting points and an excellent shooting experience.

Features
• Standard ARRI locating mounts for stable and easy attachment
• Ergonomically designed to improve grip experience
• All-in-one structure, with multiple mounting points