SmallRig Basic Full Camera Cage Kit for Canon EOS R5/R6/R5 C with BG-R10 Battery Grip

SmallRig Basic Kit for EOS R5/R6/R5 C with BG-R10 Battery Grip 3707 protects the camera while facilitating videoing with its multiple mounting points. Top Hand 2165C and Side Handle 2093C allow for a handheld shoot on your own. The kit as whole features multiple mounting points (ARRI 3/8" -16 locating holes, 1/4"-20 threaded holes, 3/8"-16 threaded hole, cold shoes) that support a wide range of accessories.

The cage is secured by one screw at the bottom and shoulder strap slots on both sides. The kit also comes with Cable Clamp 2981 to protect HDMI & USB-C cables against signal disconnection as a result of loose cables.

- Camera Cage (3464) -
SmallRig Camera Cage for EOS R5/R6/R5 C with BG-R10 Battery Grip 3464 protects the camera while facilitating videoing with its multiple accessory mounting points. The cage is secured by one screw at the bottom and shoulder strap slots on both sides, making it stable and non-deflective, and features inside silicone cushions to protect the camera against scratches. It comes with 1/4''-20 & 3/8''-16 threaded holes for attaching such accessories as a side handle 2093, top handle 1984 and magic arm with ball head 2070, one top ARRI 3/8" -16 locating hole for top handle 2165, and one cold shoe that supports microphones and LED lights. The front end has a hole for single rod clamp 3276 to connect a follow focus. The cage also fits the hand strap PAC2456, wrist strap PSW2398, and shoulder strap PSC2428. Its built-in spanner at the bottom helps remove screws and the integrated Arca Swiss quick release plate works with RS2 and tripods.

Features:
• All-in-one full cage that protects the camera
• Locked by one screw at the bottom and shoulder strap slots on both sides, stable and non-deflecting
• Built-in spanner for easy disassembly and assembly; bottom Arca Swiss quick release plate suitable for RS2
• Mounting points on the top and sides (ARRI 3/8" -16 locating holes, 1/4''-20 threaded holes, 3/8''-16 threaded holes, cold shoes)

- Top Handle (2165) -
SmallRig Universal ARRI Locating Handle 2165C is an all-in-one and half handle, with a simple and ergonomically designed to offer a comfortable handheld shooting experience. ARRI-type mounts allow for quick assembly and disassembly; locating pins enable horizontal and vertical attachment while securing the camera. Featuring an all-in-one and half structure, it comes with multiple 1/4"-20 & 3/8"-16 & ARRI 3/8"-16 accessory threads and three cold shoe mounts for monitors, LED lights, or microphones, and a built-in spanner for easy access. The cold shoe mount on the front end of the handle is designed to prevent accidental disconnection. Overall, the lightweight and practical handle can provide a wide range of mounting points and an excellent shooting experience.

Features:
• Standard ARRI locating mounts for stable and easy attachment.
• Ergonomically designed to improve grip experience.
• All-in-one structure, with multiple mounting points.

- Side Handle (2093) -
SmallRig Universal Wooden Side Handle HSN2093 is designed to provide a comfortable grip for increasing stabilization and accessory mounts for cameramen. The handle attaches to the cage or camera rig with two 1/4"-20 thumbscrews and it can be attached to both left and right side by adjusting the connector. Featuring 3/8"-16, 1/4"-20 and cold shoe mount accessory mounts on top to add a light, microphone, monitor, mounting arm, or other accessories, such as Monitor Mount 2294 and Monitor Mount 2346. The screws attach to a sliding mechanism that allows you to slide the handle up and down within a range of 39.7mm for your preferred position. A built-in Allen wrench allows to adjust the handle position and for further secure. The smooth wood handle provides a solid, comfortable grip and it also works well in the situation of low temperature.

Features:
• Ergonomic Wooden Side Handle for Camera Cage
• Can Be Configured for Right or Left Hand
• 3.1/4"-20 & 3/8"-16 & Cold Shoe Accessory Mounts
• Adjusts up & down with Sliding Connector
• Integrated Hex Spanner for Direction Changing and Height Adjusting
• Lightweight and Durable

- Cable Clamp (2981) -
SmallRig HDMI and USB-C Cable Clamp for EOS R5/R6/R5 C Cage 2981 is compatible with SmallRig Cage 2982. Designed to prevent the camera's HDMI and USB Type-C cables from accidentally disconnecting, this clamp attaches to the side of the cage using two M3 Screws and fixes the cables using two knurled 1/4"-20 screws. Each screw adjusts a sliding block that can be tightened to accommodate varying diameters. This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench.

Features:
• For SmallRig R5/R6/R5 C Cage 2982
• Attaches to cage with two M3 screws
• Secures both HDMI and USB-C cables
• Prevents Accidental Cable Disconnects