Snake River Prototyping Tray & Light Bundle for Underwater Photography/Video, Includes Tray Camera Support (Black), 2x 24mm Mount with Arm, 2x Light & Beyond Video Dive Light

The Snake River Prototyping Tray and Light Bundle for Underwater Photography/Video contains the tray camera support, a set of dual 24mm mounts with flexible 5.5" Loc-Line arms and dual W17V Light and Beyond Video Dive Lights.

Tray Camera Support
The Snake River Prototyping Tray Black Camera Support adds stability, comfort and mounting options for underwater shooting with your DSLR camera, small camcorder or action camera. The Tray features adjustable handles with rubber grips made by ODI and a CNC-machined aluminum mounting platform. A tripod mount for GoPro HERO cameras and a 1/4"-20 thumb screw come included. The wedge-shape design of the Tray puts the handles behind the camera, ideal for wide-angle for keeping your hands out of the shot with cameras and lenses with wide viewing angles, such as the GoPro HERO cameras. In addition, the GoPro can be tilted down and the Tray becomes a duo-pod with the wedge shape lifting the camera above the surface the duo-pod is set on. This makes it possible to set the Tray down in a sandy spot on the bottom of the ocean and for capturing self-portraits or shy creatures. While designed for underwater use, the Tray can also be used handheld above water or on tripods.

The two handles mount into slots down each wing of the Tray via the included T-bolts. When the handles are loosened, the T-bolts slide in the slots and allow you to adjust the position of the handles to your comfort. This lets you put one handle close to your DSLR camera so that you don't have to remove your hand in order to operate the shutter on the camera. The high-quality rubber grips are made by ODI and have aluminum locking rings that tighten onto the top and bottom of the handles so that the grips will not twist or break down with use. Two 1/4"-20 threaded and two 1/4" unthreaded mounting holes located at the front of the Tray provide mounting options for a variety of cameras and camera mounts. There is also a 1/4"-20 threaded mount on the top of each handle for adding LED lights or other accessories. Two additional 1/4" unthreaded holes are provided on the left and right ends of the Tray for mounting a wrist lanyard or retractable lanyard options.

24mm Mounts with Arm
It includes dual mounts with 5.5" Loc-Line arms for adding optional Archon Light and Beyond W17V Video Dive Lights to your underwater photography system. The arms are compatible with the Snake River camera tray. Each mount is CNC machined from rugged Delrin and measures 24mm in diameter. All hardware, including the 1/4"-20 screws, is constructed from marine-grade stainless steel. Tools required for assembly are supplied.

Light and Beyond Video Dive Light
Illuminate the underwater realm with the Snake River Prototyping Light and Beyond Video Dive Light. It features a depth rating of 328'. Its 1 XML LED outputs 860 lumens on the high setting or 400 lumens on low and also features an 860-lumen strobe mode for signaling, such as in emergencies. The beam is highly consistent in brightness from the center to the perimeter and has an angle of coverage of 110° and a daylight-balanced color temperature of 5000K.

Power is provided by a 2600mAh rechargeable lithium-ion battery, two of which are included to give you a spare. You can also substitute 2 optional CR123A batteries for one of the supplied ones. The 2600mAh cell offers a run time of 1.5-3.5 hr and can be rejuvenated via the supplied charger, which runs on 100-240VAC power for worldwide use. Switching and powering on/off is done mechanically by twisting the simple tail cap, which has a double o-ring seal. Built to resist corrosion, the light has a machined, anodized aluminum body.