





See Options
Need help? Ask our experts.
Review Summary
2018-04-17T20:00:00
Though I normally opt into just using the rails attached direct to device, this time around due to limitations with my UPS, I was required to use a shelf. Normally I would cringe at the thought of doing this due to the fact normally shelves, take up so much space, there common cumbersomeness, and normally, their down right pain to do anything with. This is not the case with this shelf, It was easy to attach, super discrete, I wasn't able to even tell I was using one. Only uses a full 2u without any overhang (from what I have seen throughout the years is a rarity). Its discreteness isn't shadowed by its strength, The UPS that I'm using is 55lbs and when fully pulled out the shelf its self, showed no sign of flex, even with the horizontal stabilizer positioned further to the rear. The only main flaw that I could spot was the over-tightening of rail bracket screws, I honestly thought these were going to "ring off", there wasn't any evidence of lock-tight, so honestly turn down the torque on the machine a little. I used a high quality USA made large screwdriver to remove the screws. To properly fit the shelf in requires these screws to be loosened / removed. Thou with any engineered product there are always room improve. minus the screw issue I can say this isn't one of those products. If your in a situation where you cannot use rails or just need a general storage shelf this is the one to get.
Rob M.
EIA RS310-D
Front Mount (Front and Rear)
2U
Steel
RoHs Compliant
CE
125.3lbs / 56.84kg
0.1" / 2.54mm
31.6" / 802.64mm
27.6" / 701.04mm
External: 24 x 3.4 x 19" / 609.60 x 86.36 x 482.60mm
065030855983
The UNISLDSHF19M Adjustable Sliding Rack Shelf lets you add a vented, sliding shelf with cable management into virtually any 4-post server rack or cabinet. This TAA compliant product adheres to the requirements of the U.S Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. The adjustable mounting depth design allows the shelf to be installed easily into server cabinets with mounting depths from 27.7in (702.2mm) to 31.6in (802.2mm). The sliding rails also offer a locking mechanism to stop the shelf from sliding out too far or sliding back into the rack before maintenance is complete.
Supports up to 125lbs (56.7kg)
Adjustable mounting depth from 27.7in (702.2mm) to 31.6in (802.2mm)
TAA compliant for GSA Schedule purchases
Includes a reversible cable management arm
Vented shelf for increased airflow
Sliding rails with locks to prevent the shelf from sliding out too far
Sturdy, 2mm cold-rolled steel construction
Offering a weight capacity of up to 125 lbs. (56.7 kg), this sliding rack shelf features a ventilated, cold-rolled steel construction for increased airflow and durability in your server room or wiring closet installations. For ease in routing cables neatly through your rack, they have included a reversible cable management arm that can be attached to the back of the shelf, plus an adjustable bezel to keep your equipment where you want it on the shelf. Backed by a StarTech 2-year warranty.
Advantage
Access equipment on the shelf easily with the simple sliding and locking mechanism
Mount into virtually any standard 4-post rack with adjustable mounting depth rails
Route cables neatly through your rack with the included cable management arm
Applications
Supply additional storage space for hardware or non-rackmount equipment and peripherals
Install into virtually any standard 4-post rack or cabinet
https://www.startech.com/en-us
800-265-1844