StarTech 5.25" Aluminum Professional SATA Hard Drive Mobile Rack Drawer

2023-03-11T19:00:00

Strength: ? Quality product. Solid heavy aluminum on all 6 sides. Including both the drive caddy and bay. ? Cool. The aluminum dissipate the heat much faster than steal or most other materials. ? Narrow bay. A little bit smaller than 5 inches. Which is very useful as it needs less space during transportation, offsite storage. The most popular size for safety deposit boxes are 5 inches. The bay easily fits. ? Drives go in and come out smoothly ? Useful handle to pull out and hold the drive caddy Challenge: ? LP4 and 15-pin SATA connectors are too close to each other at the back of the drive caddy. The challenge is that if you need to connect both a 15-pin SATA power splitter cable and a LP4 power cables on the same drive caddy, depending on those cables shapes and sizes, it might not be possible to connect both. Because those cables are blocking each other. See the attached photo to clarify what I mean by "power splitter cable". If you need to connect either the LP4 power cable or the 15-pin SATA power cable, it works though. This challenge could be resolved if the LP4 and 15-pin SATA power connectors were somehow both much further apart and beside each others. Instead of very close and on top of each other. ? Noisy fan. The front small 40mm fan is noisy. For a silent drawer, this fan can easily be either replaced or disconnected when appropriate. ? No cable bracket to click onto. The risk is that the connection could come loose over time. A bracket would add a click sound when the SATA data cable is securely fastened into it's port.

Francewhoa

Originally posted at

2022-12-14T19:00:00

There is nothing wrong with the product itself- it works great and I like the design of the caddy. The problem with this thing is that you can't buy additional caddies, you have to buy an entire unit (more than the cost of your average hard drive!) I wish I had realized this before purchasing, as I would not have bought it. I don't much see the point in a hot swap bay with one drive. Isn't the whole point to be able to swap it? But if I want to swap a different drive, I have to take the caddy apart and install the other drive. Entirely defeats the purpose of the whole thing. Can't recommend unless you don't mind to pay full price for each additional caddy and have a bunch of extra bays in your closet.

JacobT

Originally posted at

2021-03-25T20:00:00

Got two of these to replace an older caddy and I am a little disappointed. My old caddy would take 3.5 and 2.5 inch drives as the drawer part had its own connectors. I found this useful if one wanted to format a HD or do a data recovery it took seconds to insert the drive in the drawer part and insert it in the PC, the new caddy you have to screw the HD in as the HD connectors are what connects to the case unit in the PC (and only good for 3.5inch HD unless you mess about with a bracket). Shame I opened them both and removed the cellophane wrapping as I do not think I need a second one now! That said, it is well made and very sturdy and the data transfer rate is vastly faster then the old caddy unit.

Trevor1

Originally posted at

2015-11-02T19:00:00

I have used six of these DRW150SATBK devices for many years, 24x7x365. I use five of them to support standalone or RAID HDD data applications, and one of them to support an SSD. The SSD required a 2.5" to 3.5" adapter so it would mount in the drawer. In all the years I have used them I have only had to replace a fan in one of the drawers. Otherwise they have been flawless. It is a reliable, solid and well-built product. I highly recommend this product if there is a need to easily remove SATA HDDs or SSDs from a computer.

Bob919

Originally posted at

2015-03-06T19:00:00

Perfect for my desktop computer fit perfect and it has a well build design.

juan

Originally posted at