



See Options
1 Year
$5.99
2 Year
$8.99
3 Year
$15.99
Need help? Ask our experts.
Review Summary
2023-01-03T19:00:00
If anyone at StarTech has some of these lying around collecting dust, I could make use of several more.
PriceK
2022-08-01T20:00:00
After trying a pair of the S251BMU313 and also a pair of the S251BPU313 but both of these models having driver issues on Windows and Linux so not working then being returned, I tired a pair of this one... These are both as if they're dead-on-arrival and don't provoke any response from any of my Windows computers (7 / 8.1 / 10 or my Linux OS-based NAS, and not even a flash from the LEDs of the enclosures (with or without an SSD fitted)... Absolutely useless. They are also specified to have the ASMedia 1053 chip but actually have the ASMedia ASM1153E chip.
Cookie589
2022-01-10T19:00:00
I have had the drive disconnect several times and had to use a data recovery program to recover my photos. The program cost more than the drive case. I now have no trust in the device as it is unreliable.
ianc
2021-12-30T19:00:00
Constantly connects then disconnects with any drive I use. Drives work fine when I don?t sue this enclosure. Only tested with SSDs so far.
Evan A.
2021-08-15T08:45:06
Works extremely well! Easy to open. Took maybe 30 seconds to install the drive in the enclosure and plug it in to use it. Feels solid.
CHRISTOPHER M.
2021-06-05T11:14:17
put Samsung 970 EVO plus in, doesn't work sees it as F drive but says no disk. Any ideas I'll lil mad.
William M.
2021-04-23T20:00:00
I bought this enclosure (SM2NGFFMBU33) two months ago to transfer files from a PC with a dead motherboard. The enclosure worked fine and did exactly what I needed. I did check and double-check the M.2 SSD connector BEFORE I ordered it to make sure it would fit properly. My SSD was pulled from an older PC and I did see enclosures on the market where it would not fit the connector. Apparently all M.2 connectors are not the same or have changed slightly over time despite an assumed standard. Pros: Aluminum construction for durability, good build quality - solid and everything fits together the way it was designed, no external power required, all parts were included in my kit, file transfer speeds were fast Cons: the screws are tiny and really hard to work with, the SSD mounting screw causes a slight bend in the SSD board, and the SSD mounting screw comes loose and requires retightening periodically Subject to the cons described above I would both recommend this product and purchase it again.
Darren
2021-04-22T20:00:00
I've used these for several years. It is unfortunate that they are out of production.
kprice
2021-04-20T20:00:00
Opened up box and missing the SSD mounting screw and standoff as well as the end plate. Very disappointing as it is not functional with missing parts :(
taraL
2020-09-22T20:00:00
Please be aware, that if you connect this device permanently, the disc inside never spins down on it's own, when there's no activity on the USB bus. If you spin it down manually (e.g. by using Linux' hdparm) the status LED is flashing permanently until you spin it up again. Besides that, it's a great product, but the lack if the spin down feature is a big issue for me.
XVIII
2020-08-31T10:15:42
Another great product
Luis F.
2020-08-12T20:00:00
Old computer motherboard died and removed hard drive and enclosed in this. 500GB successfully saved. But blue light is always blinking even with everything closed and attempt to eject results in "Problem Ejecting USB Attached SCSI USB Mass Storage Device. Device is currently in use." But I see nothing using it.
richardL
2020-08-02T20:00:00
The first one worked without a hitch, housing a Seagate IronWolf 16 TB NAS (i.e. 24x7x365 drive), and it has been running for days without problems. Added a heat sink externally, this lowers the surface temperature somewhat. Performance is really good, typically 250MB/s disk-to-disk in Windows 10 using USB 3.1 interface over a good PCIe USB 3.1 two-port card.
Ar41
2020-06-25T20:00:00
My SSD boots, but when I try to look at the content with this adapter, my computer calls the adapter a removable disk adapter with no disk.
br13
2020-06-19T20:00:00
I ordered this through Best Buy. There was no "drive cushion" packed in the box. My Seagate hard drive was barely too wide to fit into the case. Very disappointed because I need to recover several files.
tkw59
2020-03-24T20:00:00
I bought this two years ago. Worked great. Somehow the microUSB slot got messed up. Called support, connected immediately and they provided great information. Very knowledgeable. Filled out RMA and received the replacement product. I have bought quite a few of their products. Great quality. Long lasting. Great service. I would never hesitate to buy their product.
MikeInHouston
2019-09-19T20:00:00
There is no support for Linux users although the description states "3510SMU33 supports all of the leading operating systems, including: Windows, OSX, Linux and Google Chrome". The manual also complete dismisses Linux...
unhappyLinuxUser
2019-05-16T20:00:00
Backwards compatible with USB 2.0 and 3.0. Super rugged brushed black aluminum. Nice little spacer included for secure fit SSD installations. Better than any fixed external drive. When you fill your drive up, just pop open the case and install another. I'm using this with 2TB Samsung SSD. Super fast transfer. This is a real quality product. Thanks StarTech...Bob
Bob C.
2019-04-30T20:00:00
I bought two of these today from Memory Express in Calgary. They will be back there tomorrow! My wife has a HP Pavilion (I know.... not even mediocre!) with a M2N68-LA "Pegatron" Mother Board. In the caddy (adapter Enclosure!) the PC won't start and tells me there is a problem and I need to repair my system... I connect the SSD directly i.e. no longer in the caddy... and all is well ... boots up as normal. I tried the other Adapter Enclosure that I bought... same thing! Neither works with HP or this particular board. I just hope I get my money back from Memory Express!
Cherokee
2019-02-25T19:00:00
I bought one of these two years ago, I use it every single day, and I have put thousands of terabytes through it, and it's still going strong. Please release a Type-C version of this and a Type-C version of the NVMe adapter, especially. An NVMe drive could use that extra 5Gb/s of throughput.
jeremiah
2019-02-19T19:00:00
This is the second one I've bought, I love these enclosures, super fast and so far very reliable. My only issues is that the power supply is not working, I verified that it works using the power supply from the first enclosure I bought. Also did not come with the stand.
Pitman77
2019-01-29T19:00:00
I wanted one of these to work with a WD green M.2 drive I picked up on special to see if i could 'make' a large capacity USB drive. This worked better than I expected. Not only did I get a large capacity drive in a portable enclosure, the cable means a large USB stick isn't sitting in my USB port daring me to bump it and ruin the port. Transfer speeds are very good with large files and the enclosure is very good at dissipating heat. Overall I am very impressed!
Andrew11
2019-01-18T19:00:00
I bought it and few month ago not connecting to the PC, but HD is still good.
lucrol
2019-01-13T19:00:00
Hi, i have the SM2NGFFMBU33 i added a crucial P1 M.2 2280, after connecting the unit to the computer, it fails to recognize the SSD -. Windows can see the Disk 2 Removable but states no Media. the SSD is connected and if i put it in a laptop it works fine. advice? Thanks
Winston
2019-01-11T19:00:00
This is a good quality enclosure as far as function and overall build. The instructions are poor and what should be a mindless install had me stumped for a bit. The instructions talk of a standoff installed...Mine was in the bag and I thought it was to screw the m.2 down. I was missing the screws for the end of the enclosure as none were provided. This should be a fast install but wow for some reason I had to read and figure this out. Then I looked at other reviews and found out that this is common. The screw is too short....no its the right length you need to screw down the stand off with the nut and then the other screw ...screws in the standoff. The enclosure works well but I still found it frustrating that what should take zero instructions took me time to figure out...and the poor instructions made thing even more difficult to understand. On top of that missing screws ...well thats an incomplete product. Good and bad with this but function is what really matters and for that it is ok I reviewed this product in exchange for an unbiased review.
macphoto1970_012
2019-01-03T19:00:00
I was looking for a rack mountable HDD enclosure for 4 drives to use as the media streaming RAID array in my recording studio. I am using this enclosure with an LSI/Broadcom MegaRAID SAS 9266-4i. The DAW workstation is running Windows 10 Pro. A few questions I had and the answers I discovered: Q: For use in a recording studio control room, how loud are the 3 fans on the rear of the unit? A: Almost silent! Mounted in the rack under my console, they are nearly inaudible. Q: Is this a RAID enclosure? A: No! You must have a RAID card to use with this enclosure. Q: How does the enclosure connect to my computer? A: The connector described as Mini SAS is an SFF 8088. Your RAID card probably has an SFF 8087. No problem, as you'll need an 8088 to 8087 pass through bracket anyway. Q: What drives does it support? A: It doesn't really "support" drives, as it just passes them to your RAID card. I'm using four WD 2TB Golds in Raid 10. So far, so good! The enclosure seems very well engineered. It's made of metal and feels very solid. The power supply support bracket is a nice touch, All drives have activity lights, and drive hot swap is easy, Other reviews I've seen pointed out that this enclosure doesn't auto power on in case of a power failure. In my application, this is not an issue. You should have it on a UPS anyway! Nice job Startech!
zendrum
2018-12-13T19:00:00
I bought this to use with a Crucial 480GB mSATA drive. I found that when I used it fairly intensively it will randomly disconnect from the host computer resulting in data corruption and loss. It seems to behave better after updating the firmware and reformatting to GPT/NTFS But it's a bit late: I have lost confidence in using it... as the last thing you need is unreliable storage. Also I wish that this came with both USB C and USB B cables. USB B was the only cable supplied.
AndyK
2018-12-05T19:00:00
Not all parts were in package, i am missing the end plate so i can't really use it since the whole drive just slips out of the "enclosure".
trillal
2018-11-14T19:00:00
It is very heavy and big, needs 2 cables to connect to a computer (one power cable and one data cable)
Aeschylus
2018-11-11T19:00:00
Supported TRIM perfectly BUT only after a search for the correct ASM 1153E firmware file - 140509_A1_82_40.bin then update with a third party MPtool application. This was done at my own risk - I do not recommend other users do this as they may render the unit non-functional. Perhaps I had an unit with older firmware. Suggestion - maybe provide the ASM1153E firmware which supports TRIM directly on the startech website rather than have to search at least an hour to fix it. TRIM is important for optimal SSD function. Build quality etc is good but only 3 star for this reason.
NS123
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
USB 3.1 Gen 2
ASMedia - ASM1351
SATA
Fixed
3.5"
No
USB 3.1 Gen 2
1
Currently tested with hard drives up to 6TB at 7200 RPM
10 Gbps
USB 3.1 Gen 2 - 10 Gbit/s
SATA III (6 Gbps)
Yes
1x SATA Data & Power Combo (7+15 pin) Receptacle
1x USB 3.1 USB Type-B (9 pin; Gen 2; 10 Gbps) Female
OS independent; No software or drivers required
1x Power & Activity
Positive
0.6A
100 - 240 AC
2000mA
12 DC
M
AC Adapter Included
Aluminum and Plastic
RoHS Compliant
CE
FC
Operation Humidity: 10% -90% RH
Storage Humidity: 5% - 95% RH
0 to 40 deg. C / 32 to 104 deg. F
-10 to 65 deg. C / 14 to 149 deg. F
1.2 x 7.5 x 4.5" / 3.05 x 19.05 x 11.43cm
10.9oz / 309.01g
065030861649
Work perfectly.
By Rebel
Bought it today, slapped a Samsung 840 pro SSD inside, hooked it up via USB 3 and instantly got a reading of 455 Reads and 421 Write speed. Then I transfered 10 GB of DPX files and took under 8 seconds! The USAP in this enclosure is the major advantage. Its self powered to boot. Perfect for very fast portable storage.
Totally Useful Drive Adapter
By ShaunOntario
I got this a few weeks ago to solve a form factor problem. My desktop had the rails for a 3.5" drive only, and I have a higher quality/high capacity 2.5" that I wanted to use and this solved the issue. It's size is that of a standard 3.5" drive in which a 2.5" fits. You slide the red button to the side and the spring loaded door opens. Once a 2.5" drive is placed inside, the door guides it in. The product came with suitable instructions and small screws to attach it to the computer's rails. I...
View full Review
Discover the power of high-speed data storage with our durable and reliable USB 3.1 10Gbps Enclosure for 3.5" SATA Drives. This compact, single-drive enclosure is designed to accommodate 3.5" SATA hard drives, offering you the convenience of large drive capacity up to 6TB.
Experience the superior performance of USB 3.1 Gen 2 technology, which provides greater bandwidth and speed with file transfer rates of up to 10 Gbps. This is twice the speed of USB 3.0 (USB 3.1 Gen 1) technology, allowing you to leverage the high performance of the latest SSHDs and hard drives while eliminating bottlenecks in your data transfers.
This portable enclosure is designed with a clean and simple aesthetic, making it a perfect companion for your Mac or PC. Constructed from durable aluminum, it features a fanless design for quiet operation. The enclosure also includes a vertical stand, ensuring it takes up minimal space in your workspace.
Our USB 3.1 10Gbps Enclosure supports SATA I, II, and III (up to 6 Gbps) and is hot swap compatible. It also features a vented drive tray for efficient heat dissipation, ensuring your drive stays cool during high-speed transfers.
For added versatility, this enclosure comes with a USB Type A-to-B cable, offering backward compatibility with existing USB ports or hardware. It also supports UASP for enhanced performance.
Whether you're looking to take advantage of new laptops and desktops with USB 3.1 Gen 2 (10 Gbps) connectivity, turn a high-capacity SATA hard drive into portable, external storage, or simply add extra data storage to almost any USB-enabled computer system, this enclosure is the perfect solution. It also allows you to share large files between computers quickly and securely without a network, repurpose an unused SATA drive into additional external storage space, or backup important data to an external storage device.
Experience the Startech difference with this high-quality, reliable product, backed by a 2-year warranty and free lifetime technical support.
https://www.startech.com/en-us
800-265-1844