more

See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
XLR-3-31 type (1: GND, 2: HOT, 3: COLD)
5.0k Ohm and more
+32dBu (TRIM Min, PAD: ON), +12dBu (TRIM Min, PAD: OFF)
-42dBu (TRIM Max, PAD: ON), -62dBu (TRIM Max, PAD: OFF)
+48V available
XLR-3-32 type (1: GND, 2: HOT, 3: COLD)
+6dBu (D.ref: -9dB)
+4dBu (D.ref: -14dB, -16dB)
+4dBu or 0dBu (D.ref: -18dB, -20dB)
+15dBu(D.ref.: -9dBFS, A.ref: +6dBu)
+18dBu(D.ref.: -14dBFS, A.ref: +4dBu)
+20dBu(D.ref.: -16dBFS, A.ref: +4dBu)
+18dBu(D.ref.: -18dBFS, A.ref: 0dBu)
+20dBu(D.ref.: -20dBFS, A.ref: 0dBu)
+22dBu(D.ref.: -18dBFS, A.ref: +4dBu)
+24dBu(D.ref.: -20dBFS, A.ref: +4dBu)
100 Ohm or less
etherCON Cat5e compatible
64 channels (48 kHz), 32 channels (96 kHz)
1000BASE T(IEEE802.3ab)
CAT5e STP
Supports redundant mode and Switched mode
D-sub 25pin (8in/8out, female, inch)
pull up (5V)
Open corrector
10 Ohm
20V
35mA
50mA
-128dBu or less
0.002% and less (MIC/LINE > Dante, +4dBu Inputs, PAD=OFF, TRIM MIN, JEITA)
0.002% and less (DANTE > LINE OUTPUT, 0dBFS Outputs, JEITA)
20Hz - 20kHz: +0dB, -0.5dB(48kHz) (MIC/LINE > LINE OUTPUT, JEITA)
20Hz - 40kHz: +0dB, -1.0dB(96kHz) (MIC/LINE > LINE OUTPUT, JEITA)
20Hz - 20kHz: +0dB, -0.5dB(48kHz) (DANTE IN > LINE OUTPUT, JEITA)
20Hz - 40kHz: +0dB, -1.0dB(96kHz) (DANTE IN > LINE OUTPUT, JEITA)
100dB or more (MIC/LINE > OUTPUT, 1kHz Sine wave, JEITA)
110dB or more (MIC/LINE > DANTE, PAD=OFF, TRIM MIN, D. 20dBFS, JEITA)
111dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 48kHz)
112dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 96kHz)
Black
AC100V 240V 50/60 Hz
DC11V/4A - 27V/2A
44W
32-104 Degree F (0-40 Degree C)
TASCAM IO CONTROL
With original foot: 17.88 x 5.52 x 7.08" (454 x 140 x 179.6mm)
With Rackmount angle: 19.01 x 5.20 x 4.72" (482.8 x 132 x 120mm)
9.93 lbs (4.5kg)
043774035267
16-in/16-out Dante analog converter with built-in 32-bit ADC & Class 1 HDIA mic preamps. Controllable with TASCAM IO Control app or with TASCAM Sonicview series.
Top Quality Audio I/O for Dante Networks
Offering the same performance and hardware quality as TASCAM Sonicview recording and live mixers, TASCAM SB-16D Dante-networked 16-in/16-out stage boxes offer all the advantages of Dante networking, combined with seamless integration with TASCAM Sonicview recording mixers. The stage boxes can be used as a floor stage box or rack mounted, and multiple stage boxes can be used simultaneously in a Dante network.
Seamless Integration: Remote Gain Control
When a SB-16D stage box is connected to a TASCAM Sonicview 16XP or 24XP recording mixer, microphone gain can be remotely controlled from the mixing console, and all SB-16D I/O comes up on the TASCAM Sonicview VIEW touch screens for hassle-free ease of use.
A Full Complement of I/O with the Features You Need
Easily accommodate large ensembles and extensive installed Dante systems using the SB-16D's 16 XLR mic/line inputs and 16 XLR line outputs. Need more I/O? Simply network multiple SB-16Ds. The mic/line inputs are extremely quiet, achieving a -128 dBu EIN with a +32 dBu maximum input level. Each input channel has +48V phantom power and an SIG OL LED for input-level monitoring. Each line output also is equipped with SIG OL LEDs.
Class 1 HDIA Mic Preamps and 32-bit ADCs for Best-in-Class Sound
As in TASCAM Sonicview recording mixers, each SB-16D microphone input feeds a TASCAM Class 1 HDIA (High Definition Instrumentation Architecture) preamp-the finest mic preamp TASCAM has ever made. Thanks to an instrumentation amplifier with extremely good noise characteristics in the first stage, Class 1 HDIA microphone preamps exhibit excellent EIN, signal-to-noise ratio, distortion ratio, and frequency response. The mic inputs can accept up to +32 dBu signals, providing plenty of headroom for sudden level increases.
As with TASCAM Sonicview recording mixers, the SB-16D uses 32-bit analog-to-digital converters and a 96 kHz sampling frequency. Repeated internal and external evaluations were conducted to fine-tune the SB-16D, ensuring best-in-class sound that will never disappoint.
https://tascam.com/us/support/warranty
323-726-0303