Teradek Bolt 500 XT SDI/HDMI Wireless Deluxe Kit with Transmitter and 2x Receivers, Up to 500' Line of Sight, Gold-Mount

SKU: TE1019352G

This item is no longer available.

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Teradek Bolt 500 XT Deluxe Kit Specifications

Additional Included Items

Additional Included Items

Jump to...
  • Transmitter Included Items

    - 2-pin Connector to PowerTap 18" Cable
    - Hot Shoe Adapter (1/4"-20")
    - 2x Antenna 2dBi Wi-Fi 2.4/5.8GHz
    - USB 2.0 Cable (A-Male to Mini-B)
    - HDMI 18" Cable (Type A to Type A)
    - SDI (BNC to BNC) 10" Cable

  • Receiver 1 Included Items

    - Light Stand Adapter (1/4"-20")
    - USB 2.0 Cable (A-Male to Mini-B)
    - PSU 2-Pin Connector to 18W AC Adapter 6' Cable
    - HDMI 18" Cable (Type A to Type A)
    - SDI (BNC to BNC) 10" Cable

  • Receiver 2 Included Items

    - Light Stand Adapter (1/4"-20")
    - USB 2.0 Cable (A-Male to Mini-B)
    - PSU 2-Pin Connector to 18W AC Adapter 6' Cable
    - HDMI 18" Cable (Type A to Type A)
    - SDI (BNC to BNC) 10" Cable

Transmitter

Jump to...
  • Video Inputs

    1x SD/HD/3G-SDI (75Ohms BNC)
    1x Type A receptacle HDMI

  • Video Outputs

    1x HD/SD/3G-SDI Loop-out (75Ohms BNC)

  • SDI Ancillary Data Support

    Supports metadata, timecode and start/stop flags from certain camera manufacturers

  • Color Sampling

    SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
    HDMI: RGB 4:4:4, 8-bit

  • Delay Tx to Rx

    <0.001sec (without format conversion)

  • Supported Resolutions

    1080p 23.98/24/25/29.97/30/50/59.94/60
    1080psf23.98/24/25/29.97/30
    1080i50/59.94/60
    720p50/59.94/60
    480p59.94/576p50 (via HDMI ports only)
    480i(NTSC)/576i(PAL)

  • Video Compression

    Visually lossless

  • Color Correction

    CDL/1024 1D LUT (supports 10-bit color)
    33x33x33 3D LUT (supports 10-bit color)

  • Audio Compression

    48kHz 24-bit PCM

  • Audio Input

    Embedded Audio Input

  • HTTP Interface

    No

  • Configuration Interfaces

    No

  • Switches

    On/Off and Reset Switch

  • Desktop App

    Feature-rich Bolt Manager Application for OSX & Windows

  • USB Interface Functionality

    Upgrade via Mini-USB

  • Wireless Network

    Non-DFS Frequencies:
    US: 5.19 - 5.23GHz and 5.755 - 5.795GHz
    EU & JP: 5.19-5.23GHz

    DFS Frequencies:
    US: 5.27 - 5.55GHz and 5.67GHz
    EU & JP: 5.27 - 5.67GHz

  • RF Channel Selection

    Auto only (NOT configurable)

  • Encryption

    AES-128

  • RF Power

    17dbm EIRP

  • Range

    Up to 500' (152.40m) line of sight

  • Unicast Multicast

    Unicast / Multicast

  • Noise Rejection

    Can coexist with Wi-Fi and 5GHz cordless phones

  • Power Input

    2-Pin Connector 7-28 VDC

  • Battery

    No

  • Nominal Power Consumption

    7.3Watts (Measured at 1080p60)

  • Operating Temperature

    0 to 40 deg. C (32 to 104 deg. F)

  • Construction

    Milled Aluminum (Chassis) and regulation-compliant PCB

  • Mountability

    Multiple mounting options with M3 and 1/4" holes
    3/8" ARRI style accessory mount

Receiver

Jump to...
  • Video Outputs

    1x SD/HD/3G-SDI (75Ohsm BNC)
    1x HDMI Type-A receptacle
    1x USB 3.0 micro B receptacle

  • SDI Ancillary Data Support

    Supports metadata, timecode and start/stop flags from certain camera manufacturers

  • Color Sampling

    SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
    HDMI: RGB 4:4:4, 8-bit

  • Delay Tx To Rx

    <0.001sec (without format conversion)

  • Supported Resolutions

    1080p 23.98/24/25/29.97/30/50/59.94/60
    1080psf23.98/24/25/29.97/30
    1080i50/59.94/60
    720p50/59.94/60
    480p59.94/576p50 (via HDMI ports only)
    480i(NTSC)/576i(PAL)

  • Video Compression

    Visually lossless

  • Test Pattern Generator Support

    Yes

  • Color Correction

    CDL/1024 1D LUT (supports 10-bit color)
    33x33x33 3D LUT (supports 10-bit color)

  • Audio Compression

    48kHz 24-bit PCM

  • Audio Input

    Embedded Audio Input

  • HTTP Interface

    No

  • Configuration Interfaces

    OLED Screen with Menu Joystick Navigation

  • Switches

    On/Off and Reset Switch

  • Desktop App

    Feature-rich Bolt Manager Application for OSX & Windows

  • USB Interface Functionality

    Upgrade via Mini-USB

  • Wireless Network

    Non-DFS Frequencies:
    US: 5.19 - 5.23GHz and 5.755 - 5.795GHz
    EU & JP: 5.19-5.23GHz

    DFS Frequencies:
    US: 5.27 - 5.55GHz and 5.67GHz
    EU & JP: 5.27 - 5.67GHz

  • RF Channel Selection

    Auto only (NOT configurable)

  • Encryption

    AES-128

  • RF Power

    15dbm EIRP

  • Range

    Up to 500' (152.40m) line of sight

  • Unicast Multicast

    Unicast / Multicast

  • Noise Rejection

    Can coexist with Wi-Fi and 5GHz cordless phones

  • Power Input

    2-Pin Connector 7-28 VDC

  • Battery

    No

  • Nominal Power Consumption

    9Watts (Measured at 1080p60)

  • Operating Temperature

    0 to 40 deg. C (32 to 104 deg. F)

  • Construction

    Milled Aluminum (Chassis) and regulation-compliant PCB
    Plastic Cap

  • Mountability

    Multiple mounting options with M3 and 1/4" holes

General

Jump to...
  • Dimensions

    Transmitter: 0.95 x 2.6 x 4.47" (24.13 x 66.04 x 113.54mm)
    Receiver: 6 x 3.4 x 1" (15.24 x 8.64 x 2.54cm)
    Protective SKB Case: 13.5 x 9.5 x 6.5" (34.29 x 24.13 x 16.51cm)
    Vinyl Zipper Bag: 250 x 150mm (9.84 x 5.91")

  • Weight

    Transmitter: 8 oz (226.80g)
    Receiver: 10.5 oz (297.67g)

  • UPC Code

    818264023525

About Teradek Bolt 500 XT Deluxe Kit

The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. A key feature of the Bolt XT is its backward compatibility with any Bolt of the same range, Sidekick II / LT / XT and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.

Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4"-20 and 3/8" mounting points and an ARRI rosette on the transmitter to greatly improve available mounting options.

An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.

The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine and a 5GHz spectrum analyzer to keep an eye on interference in your area.

Teradek Bolt 500 XT Deluxe Kit Features

  • Compatible with 3rd generation Bolt 500, Bolt 500 LT, Sidekick II and 703 Bolt
  • Professional software features: 3D LUTs, 5GHz spectrum analyzer
  • Dual input (SDI + HDMI) and SDI loop out on TX
  • HDMI and Dual 3G-SDI outputs on RX
  • 500 receiver features a bidirectional small battery plate LP-E6 / Sony NP-F ("L-Series")

What's in the box:

  • Teradek Bolt 500 XT SDI/HDMI Wireless Transmitter
  • 2x Bolt 500 XT SDI/HDMI Wireless Receiver
  • Wooden Camera Ultra Arm Mini Monitor Mount (1/4-20 to 1/4-20) with Arm Ball (3/8-16)
  • NATO Lock Kit
  • Protective SKB Case
  • Vinyl Zipper Bag
  • 2.5mm Hex Key
  • 3/16 " Hex Key
  • 2x Factory-Installed 14.4V Gold Mount Female Battery Plate for Each Individual Receiver
  • Teradek 1 Year Limited Warranty
  • (See Specs for More Included Items)