Teradek Cube-200 1 Channel HDMI Encoder, 250 Kbps to 10 Mbps Bit Rate, 1/8 to 1/2 Second Latency

The Teradek Cube-200 1-Channel HDMI Encoder is a camera-top HD video encoder, which is ideally suited for on-set video monitoring as well as full-scale film production Eliminating the complexity of VTR (Video Tape Recorder) rigs and camera tethering for long dolly moves as well as running footage, the Cube-200 offers a lightweight (0.43 lb/0.19 kg), compact (2.5 x 3.5 x 0.9"/63.5 x 88.9 x 22 mm) and low power (2.5 W) HDMI video encoding solution.

You can use the Cube-200 for input resolutions of 1080p/PsF, 1080i and 720p. Downscaling to lower resolutions is possible via a built-in scaler that allows output streaming resolutions of 1080p/PsF, 1080i, 720p and 480p. You can achieve Blu-ray output video quality and H.264 High Profile Level 4.1 video compression at bit rates of 250 Kbps to 10 Mbps. The Cube-200 typically exhibits a latency of 1/8-1/2 second.

You are provided with a 1/8" Stereo TRS Line Level input and embedded stereo capabilities for HDMI. Also integrated into the Cube-200 are AAC-LC and MPEG Layer 2 Audio compression standards. Direct streaming to decoding devices such as a laptop or iPad is offered via the ad-hoc networking mode which eliminated the need for any other intermediary equipment. 10/100 BaseT Ethernet based network distribution (LAN/WAN/Internet) of the Cube-200's IP video stream is provided via the infrastructure network mode that supports TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP protocols.

You can easily configure and control the Cube via a feature-rich UI. Rail system, cage, hotshoe, or camera baseplate mounting options are available for the cube. You can use the Cube-200 with RED ONE, Arri Alexa, Panavision Genesis, Canon 5Dii, Canon 7D and other handycams.