Teradek OMOD|AKS XLR2 Cage and Handle Kit

-- OMOD|AKS Extended DSMC2 Top Plate, Version B (ARRI Compatible) --
The OFFHOLLYWOOD OMOD Top Plates extend low profile DSMC2 Top Plate design to cover an attached OMOD Module.

The plate mates via 1/4-20 screws into both the DSMC2 camera brain and the OMOD Module.

Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens.

Attach the RED 7" Touchscreen or LEMO Adapter on top or side of the DSMC2 camera without interference with the plate.

-- OMOD|AKS DSMC2 Riser Plate --
The OFFHOLLYWOOD DSMC2 Riser Plate shims your DSMC2 camera up to standard accessory height using the original RED, Wooden Camera, Element Technica and OFFHOLLYWOOD BP19.

-- OMOD|AKS DSMC2 Wide Side Arm --
Use OFFHOLLYWOOD DSMC2 SIDE ARMS to make a cage with Teradek's Riser and Top Plate options.

Teradek's most popular arm clears the SSD Module on the Operator side of the camera and features (2) angles 3/8-16 holes in addition to (5) ARRI patterned 3/8-16 holes and (8) 1/4-20 holes. Can be used on both sides of the camera.

OFFHOLLYWOOD DSMC2 Side Arms come with (2) captive 1/4-20's for mating with our DSMC2 Riser Plate and DSMC2 Top Plate - Standard or OMOD Top Plates.

-- OMOD|AKS Standard Handle Kit --
The OMOD|AKD HANDLE is comprised of components that can be connected to your desired camera handle configuration. Camera agnostic - the 15mm LW Rod Clamp Riser is compatible with top plates from OFFHOLLYWOOD, Wooden Camera, ARRI, and others.

-- OMOD|AKS 15mm LWS Rod Clamp Riser --
This riser for the OFFHOLLYWOOD HANDLE provides 15mm rod clamps at LW spacing. Attach handle extension components in either direction. Attaches with captive 1/4-20 screws to top plates from OFFHOLLYWOOD, Wooden Camera and ARRI. Camera agnostic.

-- OMOD|AKS Top Handle Short Extension --
This extension bar for the OFFHOLLYWOOD HANDLE connects to the 15mm LW Rod Clamp Riser to create a handle, and can also be connected to the Long Bar Extension or Right Angle Extension or another Short Bar Extension.

-- OMOD|AKS Top Handle Long Extension --
This extension bar for the OFFHOLLYWOOD HANDLE connects to the 15mm LW Rod Clamp Riser to create a handle, and can also be connected to the Short Bar Extension or Right Angle Extension or another Long Bar Extension. It Includes 15mm LWS Rod Clamp Riser, Top Handle Short Extension, Top Handle Long Extension and 5mm T Shape Hex Tool. (15mm Rods not Included).