TRENDnet VDV & USB Cable Tester, 600 to 1000Hz Tone Frequency

TRENDnet's VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video and USB cables. The TC-NT3 identifies proper, severed, short circuit and cross connected pins for cable distances of up to 300 meters (1000'). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.

Cables and Ports
Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6 and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0 and USB 2.0 cables

PIN Tests
Identifies proper, severed, short circuit and cross connected pins

TX/RX Troubleshooting
Displays separate TX and RX results for more efficient troubleshooting

Local and Remote Testing
A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit

Continuous Scan
Continuous scan mode is design to accommodate testing with cable ends in different locations

Manual Scan
Manual scan is well suited for loop back cable testing

Quick Test Mode
Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type

Blinking Hub/Switch Mode
Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port's LED indicator to blink

Cable Distance
Tests cables lengths of up to 300m (1000')

Tone Generator
Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones.