TrekPak Foam Insert for Pelican 1500 Cases

2022-12-22T10:57:35

Fits pretty tight on the perimeter. Multiple dividers of different lengths; some are a bit longer than the box to ensure a nice fit in the end.

Andrew P.

2022-07-05T13:09:27

Inserts are exactly as described and have helped me to get better organized! Adoraba was great as usual, everything arrived in a timely manner and without incident. I have had trekpak inserts in other cases that I had purchased and loved them, this is no different. I?d strongly advise getting this product if you need a little more than what traditional foam inserts provide!

JP L.

2022-05-05T08:19:09

its a trek pack. It works just fine. A bit overpriced as most specialized photo/video gear but nothing you can do about that.

JAVIER F.

2022-03-08T04:09:41

These work great... Could have used more clips though... Buy more clips right off the bat, if you don't need them, send them back. You'll be glad to have the extras.

BETHANY F.

2022-01-13T11:52:27

The panels move a little. I put pins on the bottom (and on the top as directed) and it helped a little. They are still way better than the foam-pull outs. My recommendation is to put the heavy items at the bottom (closest to casters) so the weight does shift all of the panels. Enjoy!

LUIS C.

2021-12-13T07:19:17

Cool product clean and easy to set up

Courtney H.

2021-02-07T12:58:10

There is enough divider material to do almost anything you want with it. The cutting tool is almost foolproof and always cuts a straight line. Be sure to measure everything and know what layout you want. It doesn’t protect as well as the punch out foam, so I’m using the foam in some of the compartments to better protect my lenses from banging around. I’d buy it again knowing what I know now, so there are no regrets. But the protection it provides is lacking unless you fit everything well and use some foam.

WESLEY C.

2019-11-12T09:06:19

Important to remember to buy more pins to put up from the bottom great product.

BENJAMIN W.

2019-09-11T11:21:57

Excellent for get the maximum space for Pelican 1510 case traveler. Very easy to assemble, it’s take only 20 minutes to setup all equipment in there. Recommend to watch the YouTube video for assembly instruction. Strong, good material and light weight material. In my 35 years in photography this is a good product I bought. Rolando

ROLANDO U.

2018-12-19T13:12:43

Great quality, I wish it was coming with extra cutting boards though.

TEONA K.

2018-08-07T13:32:09

This is the divider system of my dreams! The divider panels are incredibly rigid for their thickness and you can really make configuration you can imagine. I am using mine for my DSLR, lenses, dive lights, trays and accessories in the Pelican 1510. I take it as my carry-on and and roll it over rough terrain. So far, it has been to Japan, Palau, and will Be heading back to Miami in a few days. Not a hint of deformation yet. It really puts the pick-and-pluck foam to shame. It there was anything I could suggest, it would be to include more pins. The ones included are sufficient for most configurations but is is easy to run short.

Joseph A.

2018-07-19T16:24:55

It’s a prefect product, well thought out. I had the regular inserts (foam, padding) and i couldn’t fit 3 extra lenses and some gear, I bought this hoping the remainder of my gear would fit and wouldn’t you know it, worked like a charm

George T.

2018-01-17T07:38:34

Perfect Fit!

John T.

2018-01-03T12:37:49

You spent the money on the pelican so to use padded dividers or pluck foam would be second rate. The shipping cost direct from pelican is ridiculously cost prohibitive. Adorama is the best choice!

robert h.

2017-09-20T09:41:54

This is the second time I purchased a TrekPak product. Yes, it more expensive than the ordinary padded dividers. But it's way more functional IMHO. My first purchase came with the Pelican 1510 Air. It's such a well thought out system with a foolproof approach [tool included] for cutting the high-density dividers. I'm a professional luxury real estate photographer and need all my lighting gear organized and protected. Enter TrekPak. The product is easy to assemble, easy to cut, easy to configure and reconfigure. Just make sure you really think out your layout before committing to cutting and designing your case layout with TrekPak. I know with TrekPak in combination with my Pelican cases my gear is 100% safe, and protected nested inside my case. After using TrekPak it's really hard to ever go back to conventional padded inserts.

MARC W.

2017-08-09T15:03:52

They work great! Slightly overpriced for what they are, but what camera gear isn't?

Alyssa M.

2017-07-12T21:52:23

Suggests that if you have lots of gear you wish to pack into case that you buy extra dividers, pins etc from manufacturers web site to fully divide case into small sections. I fitted 6 camera bodies with normal lenses and power accessories into my case using extra parts. If you do not line up the dividers properly you may experience a slight "bow" in some places which should not seriously affect your gear.

Terence N.

2016-12-08T11:11:12

The TREK PAK is totally the way to go. I cannot believe how much more efficient it is over the old foam inserts and it looks professional when you open the case. Organized and Neat...

Gary S.

2016-08-15T08:51:30

I just finished putting this together and so far it seems great. The downside with regular foam is that unless you leave enough spacing use of the case destroys the foam and it starts to fall apart. TrekPak leaves a lot more space for items with nice protection. The only negative is I would have liked one more piece of the foam core to work with.

Ian S.

2016-07-04T08:43:25

The pluck and pull foam that comes with Pelican cases does a superb job, however, the TrekPak allows me to carry more gear in the same size case securely.

Stephan P.

2016-06-09T22:58:16

I bought this from Adorama on 6.9.16 for the Pelican 1400 case. First the good. Very sturdy foam and in turn you can really maximize the space in the case. There is just no way to get the same lay out using pluck foam. If you make the borders surrounding your item too thin when using pluck foam it simply won't hold up. Now for the TrekPak, if you mess up cutting, no problem. Just splice two pieces together using the pins. You can reconfigure, but you may have to cut again and in turn splice pieces together to get the desired length. No biggie. I like the versatility. Ok the bad. Not enough hard foam. Not enough pins. The cutter is ok, but dulls quickly. I had to order extra foam and pins from the manufacturer. Should include more foam and pins for the price they charge.

Anonymous

2016-05-16T02:21:47

I must admit, I was a little skeptical about this divider system at first but, after getting it and using it our Pelican Storm iM2720 Case, I found this divider-system to be pretty awesome! The rock solid quality materials is very easy to work with. I use the padded dividers in our other Pelican Cases, but now I'll be quickly replacing those with the new TrekPak System. If you care about your valuable equipment, I believe this is the best protection product for you! The only thing is, because I wanted to divide my equipment up so thoroughly that I needed to order two more strips. So maybe if the company would included one more strip, it would be even more perfect.

KENNY S.

2016-04-25T18:11:36

This make space management soooooo much better with my pelican case. Highly recommended

LAWRENCE S.

2016-04-18T10:49:44

It seems like a pricey investment at nearly the cost of the 1510, but so far it's been worth every penny. It's fantastic quality, and I couldn't have crammed as much gear into the case without this thing either! Highly recommended.

Addison S.