T-Rex Engineering REPLICATOR Analog Tape Echo Pedal

• Record, playback and erase heads, for true analog tape echoes
• 2 playback heads: One is tap-tempo controllable, one is independently bypass-able. Both will be off when the pedal is bypassed
• Head2s delay time is dependant on the tape speed (delay time) and its effect on the sound varies with the delay time
• Easy tape cassette replacement (unscrew, pull the lever, take out casette, replace).
• Saturation: Drives the record head into saturation (led peak indication)
• Feedback: Adjusts the amount of feedback on both delays. This control can make the unit self-oscillate. Controllable externally by expression pedal input
• Delay time: Varies from appr. 8 ms. to 3 sec (preliminary specs). The tempo can be tapped (does not apply to head2)
• Master boost (situated right before the output) goes from unity gain to +20dB boost for overall volume boosts
• Chorus: Built-in tape modulation. This varies the tape speed in very small amounts, resulting in pitch modulation of the delays
• Delay level: Adjusts the level of the two playback heads
• 24VDC powered, for really high headroom. (In excess of +20dBu)
• True 85KHz, 60V bias oscillator to ensure pre-magnetization of the tape
• C30 1/8" chrome tape for extra long life
• All analog signal path