
This item is no longer available.
Review Summary
Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.
If we can’t fix it, we’ll replace it at no additional cost.
Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.
Browse our FAQ
1/4" TRS, female XLR (pin 2 hot) and barrier terminal strip
Electronically balanced/unbalanced, RF filtered
Balanced 40 kOhm, unbalanced 20 kOhm
>+21dBu balanced or unbalanced
>40dB, typically >55dB at 1kHz
1/4" TRS, male XLR (pin 2 hot) and barrier terminal strip
Impedance-balanced/unbalanced, RF filtered
Balanced 200 ohm, unbalanced 100 ohm
>+21dBu balanced/unbalanced into 2 kOhm or greater
+18dBm balanced/unbalanced (into 600 ohm)
20Hz to 20kHz, +0.5/-1dB
<10Hz to >50kHz, +0.5/-3dB
+/-15dB range +/-6dB range
109dB 115dB
90dB, 97dB
<0.005%
<-80db, 20Hz to 20kHz
Bypasses the graphic equalizer section in the signal path
Activates the 40Hz 18dB/octave Bessel high-pass filter
Selects either +/- 6dB or +/- 15dB slider boost/cut range
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10 and +18dBu
1 LED: Red
1 LED: Red
1 LED: Red
1 LED: Yellow
1 LED: Red
100VAC 50/60Hz, 120VAC 60Hz
230VAC 50/60Hz
24W
IEC receptacle
5.25" X 19" X 7.9"(13.4cm x 48.3cm x 20.1cm)
10.6 lbs./4.80 kg
The dbx 1231 is dual channel, 31 band 1/3 octave graphic equalizer. It was designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The sliders of the 1231 are 45mm center detent, with two selectable boost/cut ranges for precise gain adjustments. The unit features high pass filters with bypass, active balanced input and output connections, chassis/signal ground lift capabilities for quick hum isolation and an internal power supply. Multiple input and output configurations are provided for ease of use. The XLR and 1/4" TRS connectors use active balanced, low noise circuitry, with the addition of barrier strips.