Picture does not represent the actual item
See what's in the box
Review Summary
Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.
If we can’t fix it, we’ll replace it at no additional cost.
Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.
Browse our FAQ
Condenser (electret bias)
Body-worn applications in TV broadcasting, theater, and sound reinforcement.
80 to 20,000 Hz, 12 dB/octave rolloff below 100 Hz
Omnidirectional, uniform with frequency
Rated at 150 ohms. (90 ohms. actual) Recommended minimum load impedance: 800 ohms.. (May be used with loads as low as 150 ohms. with reduced clipping level)
Open Circuit Voltage: 43 dBV/Pa (7.0 mV)
Output Clipping Level (at 1,000 Hz): -18 dBV (0.13 V) minimum
Total Harmonic Distortion: Less than 1% at 120 dB
Maximum SPL: 120 dB
Dynamic Range (maximum SPL to A-weighted noise level): 98 dB
Output Noise (equivalent SPL): 22 dB typical, A-weighted 26 dB, weighted per DIN 45 405
Hum Pickup (electromagnetic): 4 dB equivalent SPL in a 1 mOe field (60 Hz)
Signal-to-Noise Ratio : 72 dB at 94 dB SPL (IEC 651)
XLR-3M Type , Preamp Output Termination
Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output cable connector
Microphone: 16 g (0.57 oz)
Preamplifier: 118 g (4.17 oz)