
Picture does not represent the actual item
See what's in the box

Picture does not represent the actual item
See what's in the box
This item is no longer available.
Review Summary
2017-01-22T08:42:06
This flash is quite powerful, and requires the lowest ISO setting I have. It works well with the trigger. HOWEVER, it goes through batteries which also heat up. I had to change the 4 AA batteries with two hours of use, and as it was losing juice the recycle times were slower and slower. It is not recommended for heavy continuous use. Also, the trigger comes with poor documentation and took some time to figure out.
Michael H.
Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.
If we can’t fix it, we’ll replace it at no additional cost.
Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.
Browse our FAQ
E-TTL and E-TTL II, Manual
Multi Stroboscopic: frequency 1-199Hz, number of flashes: 1-100
190' (58 m) at 105 mm focal length, ISO 100
24-105 mm (14 mm with wide angle diffuser panel), Auto or manual
180deg. both directions, up-down: -7 to 90deg.
Manual: full power to 1/128 power in 1/3 stop increments
Flash exposure bracketing: +/- 3 stops in 1/3 stop increments (can be combined with manual)
First curtain sync, second curtain sync, high speed sync
Normal: 0.1-5.0 sec. - red LED indicator lamp lights up
Quick flash: 0.1-5 sec. - red LED indicator lamp lights up
4x AA alkaline or Ni-MH batteries, compatible external battery pack
Radio frequency and Optical pulse Channels: 4, 3 groups
Options: Odin Tx, Odin Rx, Strato II Rx, OP Tx (Master), OP Rx (Slave), OP slave, Off
Radio range: 328' (100 m) Optical range: indoors: 39.3-52.4' (12-16 m
Optical range outdoors: 22.9-29.5' (7.0-9.0 m)
Reception angle: radio: 360deg. all directions, optical transmission +/-40deg.horizontal, +/-30deg.vertical)
1:8-1: 1-8:1
Standby: =100uA in sleep mode
8.0 x 3.0 x 2.0" (203 x 76.2 x 50.8 mm)
15 oz (425.24 g) Without batteries
The Phottix Mitros+ TTL Flash and Odin Flash Trigger is a versatile kit that pairs a full-size Canon compatible on-camera flash with a wireless transmitter able to trigger and control TTL and manual flash exposure on up to 3 groups of flash units from distances up to 328'.
The Mitros+ TTL Flash is a powerful unit with Canon E-TTL / E-TTL II functionality. The Mitros+ features a guide number of 190' at ISO 100 and a zoom range of 24 to 105mm. Besides receiving radio signals, the Mitros+ can also transmit them to other units via its built-in transmitter.
The Odin TCU TTL Flash Trigger is a wireless transmitter that runs on the 2.4 GHz frequency, has 4 channels with 3 groups and can fire the Mitros+ or other compatible flash from a distance of 328'. Flashes within each group have +/- 3 EV power compensation in TTL or user-determined power levels in manual mode. The transmitter can also remotely adjust the angle of the flash beam via its zoom button. The Odin is compatible with Phottix Odin TX, Odin RX, Strato II RX, OP TX (master), OP RX (slave) and OP (slave) wireless systems.