




Need help? Ask our experts.
Review Summary
IPS LCD Touchscreen
5" (12.7cm)
1280x720
294 PPI
16:9
5" (12.7cm)
800 nits
70% NTSC
10-bit processing
160 Degrees
White LED
No
Supports UHD-1 4K at 30/29.97 at RGB 444 8bit, YCC 444 8bit, YCC 422 12 bit & 24/23.98 at RGB 444 10/8 bit, YCC 444 10/8bit, YCC 422 12 bit, YCC 4:2:2, 8/10/12 bit color in RGB & YCC 4:4:4, 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94
1080i50, 720p120, 720p119.88, 720p/100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p59.94, 480p60, 480p100, 480p119.88, 480p120, 480p239.76, 480p240, 576p50, 576p100, 576p200, 480i59.94, 480i60, 480i119.88, 480i120, 480i239.76, 480i240, 576i50, 576i100, 576i200
HDMI
Stereo Out (headphones)
1x Micro-HDMI Input
1/8" Stereo mini-jack
1x Sony L-Style Battery slot, barrel output for powering cameras via adapter (NP-FW50 Sony & LP-E6 Canon)
Barrel (3.5mm outer, 1.1mm inner)
1x Micro-USB for camera control
Capacitive Touchscreen
Capture Tool
SD Card for Image Capture / Overlay, LUT Loading, Firmware Upgrades
Compatible with SmallHD BTR1 Wireless Remote
1x Sony L-Style Battery slot, 1x barrel connector for powering camera
6.0 - 8.4V
Battery Only Device
Yes
Li-ion
Mirrors Input Voltage from battery
2000mAh - 6300mAh
Monitor does not support the charging of batteries
CE
32 to 158 deg. F (0 to 70 deg. C)
(3) 1/4-20 thread points (top, bottom & right side)
2x & 4x with smooth pan via pinch zoom gesture
Preset Aspect Ratios & Customizable
Canon 5DMkii & Canon 7D
Underscan Only
-Squeeze1.33x, 1.5x, 1.66x, 2.0x
Automatic or Manual Control
Automatic or Manual Control
User Adjustable Color Style and Intensity
User Adjustable Intensity
Spectrum, Arri Style and Fully User Customizable
Dual - User Configurable
Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Yes
No
Fully User Customizable
Luma & RGB Style
No
With Dedicated Button and Image Gallery
Loadable as Looks on Pages or as Systemwide Color Calibration via the settings menu
No
Applied on Output Preview Page
Via SD Card or USB Storage Device
Opacity Slider and Blink Setting
No
Up to 8 channel
1x HDMI (Type A receptacle)
1x HDMI Loop-out (Type A receptacle)
Supports metadata, timecode and start/stop flags from certain camera manufacturers
HDMI: RGB 4:4:4, 8-bit
<0.001sec (without format conversion)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Visually lossless
No
CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
48kHz 24-bit PCM
Embedded Audio Input
No
No
On/Off and Reset Switch
Feature-rich Bolt Manager Application for OSX & Windows
Upgrade via Mini-USB
Non-DFS Frequencies:
US: 5.19 - 5.23 GHz and 5.755 - 5.795 GHz
EU & JP: 5.19 - 5.23 GHz
DFS Frequencies:
US: 5.27 - 5.55 GHz and 5.67 GHz
EU & JP: 5.27 - 5.67 GHz
Auto only
(NOT configurable)
AES-128
17dBm EIRP
Up to 500' (152.40m) line of sight
Unicast / Multicast
Can coexist with Wi-Fi and 5GHz cordless phones
2-Pin Connector 7-17 VDC
No
7.3 Watts (Measured at 1080p60)
32 to 104 Degree F (0 to 40 Degree C)
Milled Aluminum (Chassis) and regulation-compliant PCB
Multiple mounting options with M3 and 1/4" holes
3/8" ARRI style accessory mount
Monitor (H x W x D): 3.3 x 0.75 x 5.25" (8.38 x 1.91 x 13.34cm)
Transmitter: 0.95 x 2.6 x 4.47" (2.41 x 6.60 x 11.35cm)
Monitor: Without battery: 6.1 oz (172.93g)
Transmitter: 8 oz (226.80g)
- FOCUS Camera-Top Monitor -
The FOCUS is sure to add instant production value for mirrorless and DSLR shooters. Its bright display, professional software tools and convenient mounting is invaluable for shooters looking to do more with less gear.
Daylight Viewable 5-inch Touchscreen
The FOCUS is the camera-top monitor many shooters have been waiting for. With a light and compact form factor, the FOCUS is bright enough to see and sharp enough to pull focus.
800 nits bright
5-inch, 1280x720 IPS LCD
More pixels per inch than retina displays
Big Production Value for Small Camera Setups
The FOCUS is an ideal camera-top monitor for DSLR and mirrorless camera shooters because the Sony L Series battery powering the monitor, can also power the camera. With a battery adapter cable, the FOCUS extends camera run-time as much as 4x, while providing a more useable display.
Auxiliary power out to DSLR and mirrorless cameras
Micro HDMI input with port protection
1/8 stereo headphone jack
6 watt power draw
Convenient Mounting
Every FOCUS monitor will ship with a cold shoe mounted Tilt Arm. Shooters will have a secure way to position their monitor while maintaining a low profile.
Allows the FOCUS to tilt 180 degrees for viewing convenience
Secure and lightweight mounting via shoe adapter or 1/4 " 20
Includes a shoe mount of its own for accessories like microphones
Ships with every FOCUS monitor
Access to Professional Features
Waveform, False Color, Focus Assist, 3D LUTs and Pixel Zoom are just a few professional software tools at your fingertips with the SmallHD FOCUS. Thanks to an intuitive user interface we're calling Swipe OS, interacting and managing these powerful tools has never been easier.
- Teradek Bolt 500 LT Transmitter -
The Bolt LT takes Teradek's industry-leading wireless performance and packages it into an affordable, streamlined series of zero-delay wireless video systems. The LT line is available in 500ft. or 1000ft. max-range models, with the LT 500 offering external antennas on the transmitter for enhanced wireless performance.
Compatible with 3rd generation Bolt 500, Bolt 500 XT, Sidekick II, Focus Bolt RX and 703 Bolt
HDMI loop out on TX
External antennas on Bolt 500 TX
Smaller and lighter chassis design with robust mounting points (3/8 " and 1/4 "-20)
Extremely affordable and offers the same wireless performance as the XT
Not only lighter, but smaller too, the Bolt LT is the essential, no-frills high performance wireless video system. Each transmitter includes a single 3G-SDI or HDMI input with matching looping output, while the receiver includes a single 3G-SDI or HDMI output. Several 3/8 " and 1/4 "-20 mounting points allow Bolt LT to mount seamlessly to any camera rig and integrated bi-directional Sony L-series or Canon LP-E6 pass-through battery plates allow you to power your system far more easily than before.
Existing 3rd-generation Bolt users can rejoice because Teradek designed the Bolt LT to be backward compatible with the Bolt 500, 1000, Sidekick II and 703 Bolt, as well as the powerful new Bolt XT. This feature makes it easier than ever to build onto existing Bolt systems or plug into others already operating on set. The Bolt LT also retains critical features from the previous generation, including AES 128 encryption to protect your video feed from prying eyes and multicasting to up to 4 receivers.