Used Crimson Trace Polymer Under Barrel Red LaserGuard with Front Activation for Kel-Tec P-3AT and P32 Series Compact Semi-Automatic Pistols

2020-04-12T20:00:00

Great lazer ive used it for 8 year never a problem never changed the batteries every thing works great. I also use an extended clip so that no button isnt in the way at all

Gordy

2020-01-21T19:00:00

I recently contacted CT about my LG430 that is on my KelTec 380 carry. I have had it for over 5 years and it was not under warranty. I called and spoke to Cody and he advised me to send a note with the laser to CT explaining my issue. I did that and a week or so later when I contacted CT for status I was told that there was a failure in the flex circuit and CT was going to make it right at no cost to me. Everyone I was in contact with was friendly and helpful and CT resolved my issue with no questions asked. You folks are AWESOME and this is why you are such an industry leader. THANK YOU Crimson Trace team.

jakk

2018-08-20T20:00:00

If I had been told that the item was a refurbishment, I wouldn't have believed it. It looks(and functions) like new. The laser fits perfectly on my P32, and matched the sights on the slide exactly (right out of the box!). Activation requires no effort on my part, and I have had no issues with my grip not activating the button - I wear size M gloves, for reference. Added bulk and weight is minimal. Very much worth it, especially on such a small pistol with a long DA trigger pull. I'll be buying another soon for my other P32!

Drew

2018-05-18T20:00:00

I received the laser quickly and installation was as easy as they said. I took the gun to the range and fired off several rounds. My hand was shaking so bad that I missed the first rounds, But after that I was right on. I was very impressed. I will buy more ! Thanks for a great product.

yeaboy

2017-01-25T19:00:00

The position of the activation button has the LG-430 on and ready for defense as it is leaving the holster or pocket with the simple grip of the hand that it takes to remove my P3AT from my holster or pocket. Police training exercises have shown that when trainees are forced to shoot in rush situations, and there isn't enough time to consciously line the front and rear sites up before shooting, the gun is more or less just "pointed" at the target before being discharged. The results of doing that consistently leaves shot placement with their standard size service pistols, lower than their intended target. The shorter the barrel, the worse the accuracy. With that being the case, along with the reduced profiles of the front site and groove due to the P3AT's size, seeing the little red dot on the target when the trigger is squeezed, eliminates low shot placement, as well as the need to line the sites up for an accurate shot. With the LG-430, your little pocket rocket can be very accurate and effective from even a compromised shooting position. I have had my LG-430 for three years. Only activating the laser to check the battery and several shots periodically at the range to check it for accuracy, (I've never had to adjust it since setting it when it was installed.) I am still using the original battery. However, not wanting the battery to be dead should I need it for defense, with CT offering a free new battery annually, the reason that brought me to this web site is to order two of them. One for my pocket rocket and one for my wife's purse pistol. Should time and distance allow it, the little red dot on the chest of the person with the intent of attacking you, may prevent the attack and you from having to justify your defense in court. If not, you're only 1/100th of second away from your second option. FIGHT CRIME...SHOOT BACK!!!

Tim

2017-01-01T19:00:00

The grip button is not positioned very well. I agree with another reviewer in that it may be too high. Makes it very difficult to engage the laser. I thought it was just me that would have a problem (large handed male), but when my wife was finally able to get some time at the range we learned it worked very poorly for her as well. Too bad it is now past the return period for us. She was unable to reliably use the laser for its intended purpose.

TexAble

2016-10-31T20:00:00

With a man's hands, it is almost impossible to reliably actuate the button on the grip since it is too high up in the trigger guard so it is hard to get the finger over the top of the button where it needs to be to be reliable. I had to replace it with a Armalaser which works just fine for me. I like most of the CT lasers, but a very small handed engineer designed this one (or worse, it was never actually tested by an average man) and the result is a sight that is impossible for me to use reliably when firmly (properly) gripping the gun. The button needs to be down about 1/8" on the grip...like it is on all their other sights!

Maynard

2015-07-22T20:00:00

With this laser properly dialed in on your Kel-Tec, you can easily roll soda cans from a distance of 30 to 40 feet away and to make a more impressive display, you will be able to accurately aim right under the can and send it aerial. I love this pistol and laser combination!

Cherokee

2015-03-01T19:00:00

I have owned a CTC LG-430 that I have mounted on my Kel Tec P3AT for several years now and it has never failed me. It still works great and I have never had to replace the batteries yet. It is very durable and rugged. I highly recommend this laser to anyone that owns the P3AT.

Oscar

2015-02-23T19:00:00

Just received replacement for my LG430, which failed after 2 yrs 10 mos. No questions, no hassle, no problems, just returned the old one and they sent me a new unit! What great service! The sight is amazing in its own right, clear, bright, super easy to activate. It's mounted on my wife's P32 and she loves it, takes away her concern over proper sight picture. (yes she can use the iron sights but the laser is so much easier) I would recommend this sight and CTC to anyone.

Mike

2014-09-26T20:00:00

The Kel-Tec p-3AT is definitely what I want in a pocket pistol. Light, tiny, and invisible with a decent pocket holster - a must have for pocket carry. The only drawback is the sights, necessarily small for concealment, but almost useless for eyes that that are into their 8th decade. When I saw that CT was making a laser for it, I was interested, but thought the method of installation somewhat suspect. I have seen that type of mount on other brands, did not like it. I should have known better, the crimson trace system is flawless. I was even able to use my same pocket holster. The laser comes on naturally when you grip the pistol, and can be sighted in for whatever ammo you choose. The .380 is a fairly light round, but will do the job with accurate placement - which you get with the CT laser, and quickly. In reference to the guy who had trouble with the lack of space in the trigger guard, my digits are on the large side, and I have no problems at all. Wouldn't work with gloves, but if it is winter, I will probably be wearing something better suited to carrying a larger weapon. It is also possible to re-position your trigger finger for a better fit. Would not carry a defensive pistol with out CT.

Chuck

2013-06-27T20:00:00

I bought a P3AT for deep cover. I have large hands and shooting this pistol accurately without a laser is difficult. I put the LG-430 on mine a couple of years ago and WOW!!!...what a difference it made!! This laser is a must have for accurately shooting this pistol if you have large hands. Thank you Crimson Trace!

Alan

2013-02-05T19:00:00

If there is a way to make this work with the P3AT any better, I don't know what it is. Gun is drawn and presented and there's the dot. No muss, no fuss.

Bryan

2013-01-16T19:00:00

This is a very stable laser and it comes on when I need it. Keeps zero perfectly!!!

Patrick

2013-01-12T19:00:00

Product takes up too much of the room between the trigger and trigger guard. If you have medium or larger fingers it is hard to advance your finger forward far enough forward for the trigger to engage for the next shot. Results: you often pull the trigger and the gun doesn't fire. Removed mine and sold it on internet.

SGACOWBOY

2012-12-28T19:00:00

I have had this laserguard for quite a while now and have had no problems with it, it keeps the profile of the gun small for pocket carry and it just works. I can't see myself without this product on this gun.

Dennis

2012-10-12T20:00:00

I just received this laser yesterday. It assembled in five minutes. It had to be adjusted but is easy to adjust. It is a fantastic addition to a Keltec P3AT. To top it all off this laser is made in America! Now how do you beat that.

Joe

2012-09-06T20:00:00

I have a bunch of great things to say about the KelTec P3AT and only two complaints: The size of the grip and the sights. Of course, the reason for having a pocket pistol is small, so the grips have to be minimal! And the sight profile has to be small as well! The grips: all a shooter can do is wrap as much of your hand around it as possible and hold on tight - this little thing bucks! The sights: get a CrimsonTrace LG-430 and forget about them! Just grip the little gun tightly, put the laser dot on where you want the hole and press the trigger - Voila! There's a hole! Love it!

Miles

2012-04-29T21:00:00

Makes the weapon much more viable

Thomas H.

2012-01-15T19:00:00

Just attached new laser to Kel Tec and now want more for the Glocks......excellent product.

JD

2011-12-14T19:00:00

I believe in Crimson Trace so much, I have the Laser's on three of my carry handguns!

Sheik

2011-12-10T19:00:00

Recently had the opportunity to see the LG-430 first-hand on the P3AT of a friend. This is awesome! Really makes a difference on this feisty pistol. Definitely on my wishlist.

Sandy