
Picture does not represent the actual item
See what's in the box
This item is no longer available.
Review Summary
2014-04-28T20:00:00
I so few reviews on this (or any of the new line of MG mixers) and I wanted to chime in to to say what a fantastic sounding mixer this is. I have only A/B'd to the older generation MG82CX mixer. The sound is clearer, cleaner and more lively with less self-noise. The reverb too is a notch up, being less boomy than the previous model. My only concern is the power supply is a wall wart, potentially taking up space on a power supply and the plug into the board is not as sturdy as the older model. Though it is a wall wart the design is more horizontal, so it ended up not effecting other inputs. Note: this concern is addressed in the models with more channels- it hasn't become a problem though. In conclusion, the pristine sound quality of this mixer made my tone come alive (making me want to play music more than I already do). Very highly recommended!
TS

Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.
If we can’t fix it, we’ll replace it at no additional cost.
Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.
Browse our FAQ
SPX algorithm: 6 programs (3 reverb, 3 delay)
+48 V switchable, channels 1, 2
2x mono [mic/line]
2x stereo [line]
2x stereo out
1x headphone
1x stereo
26 dB (mono channels)
80 Hz, 12 dB/oct (mono channels)
EQ high (mono channels) gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ low (mono channels) gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
Peak LED turns on when post EQ signal reaches 3 dB below clipping
2 x 7-segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
0.01% at +8 dBu (20 Hz to 20 kHz), GAIN knob: min, 0.003% at +18 dBu (1 kHz), GAIN knob: min
+0.5 dB/-0.5 dB (20 Hz to 20 kHz), refer to the nominal output level at 1 kHz, GAIN knob: min
-128 dBu (mono input channel, Rs: 150 Ohms, GAIN knob: max)
-102 dBu (STEREO OUT, STEREO LEVEL knob: min)
-88 dB
PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, cable length = 1.5 m), 100-240 V, 50/60 Hz or equivalent recommended by Yamaha
12 W
0 to +40deg.C
149 x 62 x 202mm (5.86 x 2.44 x 7.95")
0.90kg (1.98lbs)
Simply great sound quality!
By TS
I so few reviews on this (or any of the new line of MG mixers) and I wanted to chime in to to say what a fantastic sounding mixer this is. I have only A/B'd to the older generation MG82CX mixer. The sound is clearer, cleaner and more lively with less self-noise. The reverb too is a notch up, being less boomy than the previous model. My only concern is the power supply is a wall wart, potentially taking up space on a power supply and the plug into the board is not as sturdy as the older mode...
View full Review
The Yamaha MG06x is a compact six-input mixer with built-in effects for small performances, lectures, recordings and similar applications. The mixer features two mic/line combo inputs with D-PRE mic preamps as well as four 1/4" line inputs with stereo level controls. Each of the two mic/line inputs is equipped with a 2-band EQ and a high pass filter at 80Hz. The D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26dB attenuation switches for recording loud sound sources such as guitar amplifiers.
The MG06x mixer has stereo XLR outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as TRS 1/4" stereo outs for sending to powered speakers, amplifiers or devices such as digital recorders. The mixer's built-in effects can be engaged on the two mic/line combo inputs and they feature reverb and delay. Providing three reverb and three delay settings plus a dedicated FX return level control, these effects can be used to help vocals and instruments sit better in your mix.